Message saying Windows 7 32-bit pro isn't Compatible with Adobe Encore CS4.

After a fresh install of my CS4 suite on my new Computer I got this message. I have updated Encore with 4.1 and I still get the message. I can open Encore anyway, and I have even burned a project too (SD project). However, when it always freezes when I import an HD file as an asset while I'm attempting to burn a Blu-Ray disk. Is this related? I have updated my drivers on my burner as well. Any help would be greatly appreciated.
Thank You!

As well as the required Roxio component fix, some other reading
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

Similar Messages

  • I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. Help!

    I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk.  Does anyone have any suggestions?

    Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
    At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
    You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
    In the future, do not move any of the preinstalled applications. Leave them where they are.

  • Error message says my EOS Rebel T5 isn't compatible with Mac Yosemite--help!

    I'm having trouble downloading photos from the camera to Image Browser OX. Says it's not compatible with Yosemite, yet the web site says it should have the correct drivers installed. What do I do?

    Apple's photo apps will import images from the camera with no problem (RAW or JPEG - they support both).
    If you want to use Canon's software, you'll need to make sure you're running the versions compatible with that OS.
    The software is located here:   http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_rebel_t5_18_55_is_ii_kit#Dri...
    You may be able to update the base install to the latest version.  Canon's updaters require that a previous version of the software is installed.  If not, you can download the full install (that's the item called the "EOS Digital Solution Disk Software")
    Good luck!
    Tim Campbell
    5D II, 5D III, 60Da

  • Is Mac book pro 13" Retina compatible with Adobe premiere pro 7.2.2?

    Does anyone know whether the mac book pro 13"  is compatible with the latest Adobe premier pro 7.2.2?
    Specs: Intel iris graphics card (cannot be changed), screen resolution (2560x1600 retina) and processor (2.6GHZ).
    Thanks!

    Hi,
    Since you posted in the photoshop forum, you want to ask over in the Premiere Pro forum, where folks are more familiar with that application.
    https://forums.adobe.com/community/premiere

  • Is Mac book pro 13" Retina compatible with Adobe prem pro 7.2.2?

    Does anyone know whether the Intel iris graphics card, the screen resolution (2560x1600 retina) and the processor (2.6GHZ) on mac book pro 13"  is compatible with the latest Adobe premier pro 7.2.2? (it is not possible to change the graphics card on the 13" mac).

    Hi,
    Since you posted in the photoshop forum, you want to ask over in the Premiere Pro forum, where folks are more familiar with that application.
    https://forums.adobe.com/community/premiere

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • Why does illustartor CC open then crashes and i get a message saying windows don't know the prob?

    why does illustartor CC open then crashes and i get a message saying windows does not know what the problem is. everytime i open it, Now i know it works on my computer becuase i've used illustartor plenty of times on my current desktop but ever since today its been acting wierd and work so i've unistalling and reinstalling but still nothing works then i tried installing on another hardrive still did not work and i cleaned out my registryies, optimized my disk, and cleaned temp files tooo so i just do not know what went wrong and i really need help i have class assignments that i have to get done in illustartor so if anyone can help me and let me know what the problem is and what i have to do i would really apreciate it.

    Hi J,
    - Do you see an AICC splash screen? If yes then could you please let us know where exactly it crashes i.e. while loading which plugin or font?
    - Do you have any 3rd party plugins installed? Can you please remove those (do take a backup of them) and see if AI launches fine? This way you would be able to find the plugin creating the problem.
    - Did you install any OS or Ai update after which it started showing the problem?
    - Please check if you have all the Verdana family fonts installed.
    Let me know if any of these work.
    Thanks,
    Dhirendra

  • TS1424 i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"

    Hi marymike,
    The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
    Please try the suggested steps mentioned and check.
    Regards,
    Rave

  • I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

    I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

    Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
    Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
    Do you have an App Store account? Did you ever use it to install the OS?

  • "Your PC's CPU isn't compatible with Windows 8". How to turn on XD flag on IdeaPad z570 BIOS?

    When I attempt to UPGRADE (not a clean install) from Windows 7 sp1 to Windows 8 Release Preview, the installer halts and shows the message "Your PC's CPU isn't compatible with Windows 8.".  In searching for a resolution to this, some people have had success in avoiding this error and successfully installing Windows 8 by turning on the XD setting in the computer's BIOS security tab.  My Lenovo z570 Intel i7 BIOS version 45CN47WW does not display this setting and so I cannot change it.  How can I change it?  I found comments on Lenovo's site that ThinkPad laptops BIOS had been updated to be able to switch this xd flag on, but found nothing for the IdeaPad z570 BIOS.
    A work around was to use a different installer: the setup.exe located in the sources folder of the Windows 8 install cd/usb drive.  This installer does not check for the xd to be on.  But I will need to set my Lenovo laptop's xd flag on when the final version of Windows 8 is released. 

    Could be too that things will be different in the final version with the NX bit setting than in the ctp. Nice that there is a workaround available :-) for the tech preview.

  • My Macromedia Flash ActiveX Control isn't compatible with Windows 7 / 64bit

    I have downloaded the newest version of Adobe flash, and it installs like normal...and I think it is working fine....but on some sites (even You Tube) and some software programs, I get this message:
    Your version of Macromedia Flash ActiveX Control isn't compatible with this version of Windows.
    I am tired of wasting so much time with this...I read on the net that some people compiled their computer to 86...whatever that means....but no one explained how to do it.
    I have a Flash professional in ADOBE MASTER COLLECTION C6 / but all programs and sites default to the normal Flash player (that constantly gets updated,

    I have a similar problem, Win 7 64-bit, I did a clean install*, downloaded latests (Adobe - Install Adobe Flash Player), and after restarting my computer, Win7 64-bit Action Center popped up: "Your version of Macromedia Flash ActiveX Control isn't compatible with this version of Windows" with no error codes to look up knowledge base. Like seriously, no one from Adobe answered this in 9 months?! And the steps in Common problems | Flash Player sound like I need to purchase support before I file a report?
    Currently, my Firefox plugins only show Shockwave Flash 13 not Adobe Flash. Do I need to install Flash plugin for Firefox? (http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe)
    Thanks!
    * as per How do I do a clean install of Flash Player?:
    1. Add or Remove programs ... Flash ... uninstall,
    2. deleted all files & folders in C:\Windows\system32\Macromed\Flash, C:\Windows\SysWOW64\Macromed\Flash, %appdata%\Adobe\Flash Player, %appdata%\Macromedia\Flash Player),
    3.  verified that the files “FlashPlayerCPLApp.cpl”, "FlashPlayerApp.exe", and "FlashPlayerInstaller.exe" in C:\Windows\system32\ (for 32-bit systems) or C:\Windows\SysWOW64\ (64-bit system) were deleted,
    4. prepared to use Unlocker http://www.emptyloop.com/unlocker/ if any files couldn't be deleted,

  • My version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows

    I am trying to use a new copy of Camtasia Studio 3, and I keep gettiong the error message that my version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows and that I should ocntact Adobe for support. So here I am.
    I am running Windows7 64bit, and it's a brand new computer so I know that there aren't tons of legacy installations or Flash players on it. This page http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html tells me that I have Flash Player version 11.4.31.110 installed but that I should have 11.4.402.287 installed. But I have installed the latest Flash player from the Adobe site (twice!) and it never gives me an option for 11.4.31.110 vs 11.4.402.287.
    I am using Chrome and Flash is working fine in my browser: It's only Camtasia that isn't working well.
    Thanks!

    Hm, I assume you mean Camtasia Studio 8?
    Check the chart on the page you linked. You'll see that the version you have installed is in fact the latest version for Chrome. They haven't updated it beyond that. Each browser engine has its own latest version of flash. IE and Mozilla are 11.4.402.287.
    Aside that, there's no reason Camtasia should be requiring you to have that version of flash. Make sure when you're publishing your content that you don't check off any options to "require the user to have the latest version of Flash". You should also (if possible in your project) try to target MP4/HTML5. Check any HTML being generated with it (hopefully using SWFObject) and check for the version checking code. There is absolutely nothing Camtasia needs to require the latest version to do. I've been using Camtasia (TechSmith codec mostly) for screen recording since version 2.

  • Contact Adobe for support. Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows.

    I reinstalled my Adobe Acrobat 6.0 Professional only to get the message "Your version of Acrobat Professional/Standard 6 isn't compatible with this version of Windows" when I tried to run the program.  I am using Windows 8.1 on a Dell laptop PC.
    How do I fix this problem?

    Buy a new version, currently at 11, 5 versions since your 6..

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

    I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?

    Your MacBook Air is an Intel-based system. To download the current version (11.2.202.228),  go to http://get.adobe.com/flashplayer/ and download it from there.
    If there is still a Flash issue, you can try the Google Chrome browser, which has the current Flash built into it, to see if it works any differently with the videos. It's available from https://www.google.com/chrome

Maybe you are looking for

  • Best practice for developing and testing AIR iOS multitouch apps

    I'm considering switching our iPhone development practice from XCode/Objective C to AIR to leverage a larger pool of in house talent. The biggest concern I have right now is testing multitouch functionality - the prospect of having to do incremental

  • Defining field for T021S but not displaying in automated structure

    Hi, I am facing following problem:-- I have define two fields throgh IMG>Finacial accounting>a/c rec. and payable>line item>display line item-->define additonal field After defining its showing 2 field entries into <b>T021S</b> table and also added t

  • Not responding 10.2.1.1

    Ever since I updated to new itunes I have had tonnes of problems. 1) When trying to add music via add folder or file, Itunes freezes and stops responding. 2) When plugging phone in the USB is not recognised. 3) When attempting to sync my Iphone 4 Itu

  • ADF visualization components not showing in a region

    I have a task-flow of JSF fragments, when I visit a page with adf visualization components they are not showing. I call: region.queueActionEventInRegion(getMethodExpression(methodExpression), null, null, false, -1, -1, PhaseId.ANY_PHASE); They dont s

  • Location of Customer Statement Report

    Hi all, I am wanting to customize the Customer Statement Report - when printed it appears to be a Crystal Report, but in the list of reports in the Report and Layout Manager there appears to be no reference to it under Customer Receivables Ageing or