Message sending/ receiving problems and contact status issues.

Been using the Skype on my Samsung Galaxy S4 (GT-I9505) with Droid 4.4.2 for several months now without any issues, however in the last few days it's been plagued with problems (It has recently had an update, 5.8.0.13549). While on mobile data it will often outright refuse to send or receive messages or calls, other apps and internet all work fine and it shows me as connected. While on mobile data and on wifi it doesn't display contacts status correctly, with some online people being offline, some offline people being online and people who are away being either online or offline. I have tried clearing the app data and also tried to reinstall the app, it had the same issues after both. Nothing else on my phone has changed. Any advice would be appreciated.

I'm also having the same problem as you. I'm using a galaxy S5 phone. Didn't do anything but since the last update I've been experiencing the same problems as yours.. Have you fixed it at all?How do you downgrade or revert back to the old version, where everything seems to be working well/

Similar Messages

N82 message sending&receiving problem

hi. Sometimes when my friends send me a text message, it is reaching me too late . Similarly, again sometimes while i send message to someone , it takes more time than usual to be delivered. What could cause this? ty

Hi Tanayy,
Welcome to the Nokia forum.
If it takes a long time to receive messages, or the messages arrive much later than you've sent them, this is caused by your operator. It might be that the SMS settings are somehow configured incorrectly on your phone though, so there might be something you can do about this yourself.
Perform a soft reset by entering *#7780# into your phone and default security code 12345, unless you've changed this code yourself.
Now go into your Message settings and go to the message centre number. Write it down, delete and save it, then re-enter the number and save to refresh the memory.
If the above doesn't fix the issue, contact your operator and ask for a different SIM card.
Let me know how you get on!
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Adobe Digital Ed 4.0 will not open -- gets a Microsoft error message "encountered a problem and needs to close"

Does not open.
Instead Microsoft error message "encounters a problem and needs to close".
I have already tried the uninstall & reinstall "solution".
What else can I do. I have a paid for document I would like to read.
Thanks.

Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep

Messaging and Contacts Display Issue

Hello,
Having a problem where contacts are appearing as numbers instead of the contact name in the messages page. I have contact and it still says, "(xxx) xxx-xxxx."
I've deleted the messages, deleted and added the contact, removed the 1 before the area code from the number, and none of this has worked. This is a non jailbroken phone. Anyone else had this problem with a solution? Thanks!

I have the same issue.
I was abroad and made some calls to a contact.. Now that I am back in my country I have the problem that the number is not recognized as my contact number.
Does any one knows what is happening??

Ipod Calendar and Contact Sync Issues?!!!

Quick note:
Itunes 7.6.1
Ipod 1.1 (latest)
OS X 10.5.2
Hi guys,
I have a 3rd generation ipod nano (4GB). It has been working fine since January but it has had trouble in the last month. I noticed about two weeks ago that my ipod nano had no contacts and no calendar events on it. I went into itunes and it was set to sync all contacts and calendars. It just wouldn't sync them. The ipod had over 2GB available free space. Software is all updated.
Unclicking and reclicking the settings didn't work, so I did unset and unplugged, etc etc. Nothing worked.
So I reformatted the ipod completely. That fixed the problem for awhile but not a week later it's started up again. when I go to my ipod it says it can only sync 21 of my contacts because:
"Only limited portion of your contacts could be loaded due to the amount of content on this ipod."
The ipod has 2.5GB available this time! None of the calendars are synced at all. It syncs my music no problem..
So what the heck is going on and what can I do?! I'm out of ideas.
Message was edited by: canadian351

This is a known issue with the current iPod nano firmware. Nothing is going to 'solve' it but an update from Apple. However, it's not nearly as serious as it seems. After you sync your Calendars and Contact (and Notes, they are affected by this issue, too), they often will not appear, but a simple reset will always 'refresh the iPod's memory'. (And you do that by turning the hold switch on and then off, and then holding down the centre button and menu button simultaneously for about 10 seconds until the iPod reboots.)
This is not actually an issue with Contacts or Calendars failing to sync. It's an issue with the iPod failing to recognise that they've been synced. A simple reset always solves it in my case and many others.

Outlook 2010 send/receive problems

when trying to send/receive, receive error message "not implemented"

Also try to reset your srs-file to check if it helps. See:
http://www.msoutlook.info/question/164
This issue also occurs if Outlook installation itself is broken. Try to
run a repair of your Office installation to check the result. Same scenario and solution described here:
http://www.msoutlook.info/question/825
Best Regards,
Steve Fan
TechNet Community Support

Message send failure only some contacts

iPhone 5 two of my contacts cannot receive text messages from my phone! Message send failure. All others are fine cant work out why, updated phone, reset phone also and nothing!!!! Tried with wifi off and on looked at all settings can't see anything amiss! Any ideas???

any help here, friends?

Send/Receive problem in Outlook for Mac 2011

Ever since I installed Lion and iCloud my Outlook for Mac application will not receive mail unless I manully click the Send/Receive button. I have checked the schedule button under Preferences.
Prior to the installation of Lion and iCloud I received mail automatically.
ANy ideas for settings?

Hi. I had same problem. All you need is to change outgoing and incoming servrrs. I had smtp.me.com and mail.me.com instead of smtp.mail.me.com and imap.mail.me.com, as described here http://support.apple.com/kb/HT4864
It was working up to yesterday. You may need just change servers names in account options in outlook. Be ready to full message database rebuilding

Outlook 2010 cannot send/receive mail AND states mailbox is being optimized due to upgrade AND outlook hotmail connector needs updating.

As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches (including SP2 - KB2687455) from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014. I have been running Outlook 2010
since it was first available.
An unhelpful error is thrown, after trying to manually perform a Send/Receive:
Not Implemented
While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
"Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
"You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
I am unable to access ANY account settings, as well as poll my various mailboxes.
While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches -
specifically, Service Pack 2 (KB2687455) - that were recently applied to Microsoft Office Professional Plus 2010.
Microsoft, what the #$%# is going on?
I've read some related posts that suggest the core issue is other than what Outlook is reporting. The posts recommend the following. However, in my case, the below steps did not correct the
issue. In fact, the new profile would not allow me to view/manage the associated accounts or data files.
(1) Remove your current Outlook Profile. No worries - this doesn't affect your mail data (.PST files):
http://office.microsoft.com/en-au/outlook-help/remove-a-profile-HP010356455.aspx
(2) Create a new Outlook Profile:
http://office.microsoft.com/en-au/outlook-help/introduction-to-profiles-HA010355553.aspx
Note: Outlook complained "An unknown error occurred, error code: 0x80040154." However, exiting the Mail config window and relaunching shows that the new profile is intact.
(3) If you previously had the Outlook Hotmail Connector installed, reinstall it. If not, then just ignore and the warning should go away after creating a new Profile.
32-bit connector: http://www.microsoft.com/download/en/details.aspx?id=24677

I was able to resolve this issue as follows. However, why it occurred is unknown at this time and
unrelated to a corrupted Outlook Profile, as mentioned on my prior post. It seems highly probable that it was caused by the recent batch of Microsoft Updates for this product which included Service Pack (SP) 2.
1) Performed a "repair" of Outlook 2010, via the Control Panel > Programs and Features.
2) Rebooted.
3) Prior to launching Outlook, returned to Control Panel > Mail and configured the location of my PST file (not in default directory).
4) Had to reestablish as off my mail accounts, settings/preferences/etc. This step was the most tedious and frustrating.

Recent update download upset my entire itunes program. Can't use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.

A recent update download upset my entire itunes program. Unable to use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, Error 7 (windows error 1114) etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Launching adobe digital editions 4.0 - error message "encontered a problem and need to close

Hello,
i've installed ADE for the first time and cannot get it work. WHen I click on the icon I receive a message that it encontered a problem and needs to close. Where can I get advice how to fix it?
Thanks.

Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep

Downloading XI many times or 10 few times, getting message: Adobe encounters problem and needs to close down.

I have tried many times to download XI. After downloading I got the message : Adobe has encounter a problem and needs to close. The documents I saved in my computer with version 9 are crushed. When I tried to download pdf document from my mail. I got the message: install the new version, because Adobe block me downloading.

Hello Lydia,
Please try this link - http://www.adobe.com/support/downloads/product.jsp?platform=windows&product=10
Adobe - Adobe Reader : For Macintosh
~Deepak

"Send to" problem and sync issues.

Hi,
When exporting my FCP sequence to Soundtrack Pro using Send To, it arrives in STP with a bunch of audio files missing. Weird thing is I can see them in the little preview/position window, so STP knows they should be there, but they're nowhere to be seen in my timeline.
As an experiment, I exported as OMF and, on import to STP, the files are there, however when I export a finished mix to FCP there's a serious sync drift (like 2 secs over 5 minutes).
I've checked my project prefs and STP is set to 25fps (as is my FCP project). However when I open the timecode HUD, it's counting at 24fps. Is there somewhere else in STP that I should be setting my frame rate?
Thanks in advance.
Any help greatly appreciated!

Hi,
Thanks for your reply. The missing audio files were DVCPro HD, as is the majority of the project. I selected the timeline and used "Send to" in the file menu.
By far the most pressing issue is the sync problem. How on earth can it lose sync like this? I've done my audio mix (30 min project) and I have a project to deliver today. Can you shed any light on what I'm doing wrong? Is it a known bug?
Thanks again.

New Domain Names and Contact Form Issue

Hello all,
I'm working for a client who is using one of the newer domain name extensions. It reads like this: www.COMPANYNAME.farm
The .farm is a new extension.
On my contact form I use the e-mail address [email protected]
The e-mails are never sent through. You can submit a form, it says it sends successfully, but the e-mail is never received.
Any ideas if adobe muse has troubles with the new 'non-standard' domain extensions?
Any other solutions?
Thanks,
Jonney

Sounds like you are hosting on GoDaddy? If so, there are plenty of threads on here with the same problem.
Generally what you need to do is create a dummy hotmail address and list it first. [email protected], [email protected] and that will likely fix your problem. Kind of a crazy work around but that is a GoDaddy issue (if in fact you are hosting with GoDaddy).

Just bought an iPhone, SMS sending/receiving problems...

Hello,
I recently purchased an iPhone earlier today and have since activated my phone. I transfered the phone number from an old phone to the iPhone. I got an email verifying that everything had been transferred and that I could now make calls out with my iPhone. While that works, I can send and recieve calls, it is not working with SMS text messages. I send the messages but they never arrive to where I send them, nor can I receive them. Funnily enough, I can still send and receive them from my old phone. When I call my cell phone, my iPhone rings, but not my old phone. So it seems as if calling is being sent to my iPhone but texting is still being sent to my old phone. I just activated the iPhone a couple hours ago, is it possible that I still have to wait a while before the texting starts working on the phone too? It doesn't make any sense as to why my old phone can still send and receive them. If anyone has any idea of what's going on or what to do, thanks a lot.

It can take 24-36 hrs before SMS acts properly after porting a number from another phone. You may find later that you can send but not receive, and this is the same issue. If it has not resolved itself in 48 hrs contact AT&T to see what the situation is. But until that time, be patient.

Message sending/ receiving problems and contact status issues.

Similar Messages

Maybe you are looking for