Message Server 2005Q4 configure failure

When I attempt to configure Messaging Server I have one task that consistently fails. The task is
FAILED: /opt/SUNWmsgsr/lib/ldapmodify -h hardy.internal -p 389 -D cn=Directory Manager -j /opt/SUNWmsgsr/lib/config-templates/cfgdir12207 -c -e /opt/SUNWmsgsr/config/cfgdir.ldif.rej -f /opt/SUNWmsgsr/config/cfgdir.ldif : status = 32
Does anyone have any idea on what might be causing this error?
Thanks,
Pete

Start out by looking at the error itself. Is it the same one reported last year?
Then look at your Directory Server's Access Log. See what it reported for the same transaction.
It's not uncommon for people to run comm_dssetup.pl, and give different responses to the questions than when running configure. that will cause configure to fail in the same way.

Similar Messages

My error: Messaging server 2005Q4 on solaris 10 u7

Hi,
I did install messaging server 2005Q4 on solaris 10 u7 in sparc platform. After setup, i get problem when run perl comm_dssetup.pl configure
/opt/DSServers/bin/slapd/admin/bin/perl comm_dssetup.pl
Please enter the directory manager DN [cn=Directory Manager]:
Password: The entered password for DN cn=Directory Manager is incorrect.
Please correct the problem and re-run this script.
There only 1 password so it is no way that i may fill an incorrect password. Besides, I have install many times, but this 's the first time i meet this problem. So I predict this is incompatible issue.
What should i do to correct this issue?

tien86 wrote:
There only 1 password so it is no way that i may fill an incorrect password. Besides, I have install many times, but this 's the first time i meet this problem. So I predict this is incompatible issue. Have you got the following patch installed:
http://sunsolve.sun.com/search/document.do?assetkey=119213-19
If so I suggest you read the "IMPORTANT NOTE" towards the bottom of the README file as this patch is known to cause problems with older releases of Directory Server.
Regards,
Shane.

Installed sync on Firefox 3.6.8. I receive error message: Server Incorrectly Configured. How to fix it?

I installed Sync on Windows XP Home Edition, Firefox 3.6.8, with Zone Alarm and AVG anti-virus. Sync is not updating, instead it produces error message: Server Incorrectly Configured and hangs up. How to fix it?

You might want to also post on this Google Group dedicated to Sync (formerly known as Weave), since it's such a new add-on.
http://groups.google.com/group/mozilla-labs-weave

[Help!] Log file size Messaging Server 2005Q4

Hi,
I have a large environment where I need to keep detailed IMAP log.
I tried with logfile.imap.maxlogfilesize = 4294967296but I notice that imap file size is limited to 2MB:
ls -l
-rw-------   1 mail mail      763225 Feb 20 09:16 imap
-rw-------   1 mail mail     2097263 Feb 20 08:56 imap.7307.1203494098
-rw-------   1 mail mail     2097374 Feb 20 08:59 imap.7308.1203494213
-rw-------   1 mail mail     2097212 Feb 20 09:01 imap.7309.1203494341
-rw-------   1 mail mail     2097248 Feb 20 09:03 imap.7310.1203494468
-rw-------   1 mail mail     2097235 Feb 20 09:05 imap.7311.1203494608
-rw-------   1 mail mail     2097273 Feb 20 09:08 imap.7312.1203494727Is this an implicit limit not configurable?
My system is:
logfile.imap.buffersize = 0
logfile.imap.expirytime = 604800
logfile.imap.flushinterval = 60
logfile.imap.loglevel = Debug
logfile.imap.logtype = NscpLog
logfile.imap.maxlogfiles = 10
logfile.imap.maxlogfilesize = 4294967296
logfile.imap.maxlogsize = 42949672960
logfile.imap.minfreediskspace = 524288000
logfile.imap.objectclass = top
logfile.imap.rollovertime = 86400
logfiles.imap.alias = |logfile|imap
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS srvmsg01 5.9 Generic_117171-07 sun4u sparc SUNW,Sun-Fire-V440
I thank you very much for every hints you could let me know.
Best Regards
marco

ziopino wrote:
I have a large environment where I need to keep detailed IMAP log.
I tried with logfile.imap.maxlogfilesize = 4294967296
The maximum value of maxlogfilesize is 2GB (a common filesystem limit).
There is a whole write-up on logging and how to configure your system to keep a large amount of logs here:
http://blogs.sun.com/factotum/entry/messaging_server_more_on_managing
Regards,
Shane.

Messaging Server 3: Startup failure due to postmaster error

Attempting to start up Netscape Messaging Server 3.x fails. From the
Server Selector, a dialog box shows the following error message: 

"Error:
An error occurred during startup."

The following error message appears at the command line: 

# /etc/NscpMail start
19990407000633:Dispatch:Notification:Error encountered in checking for
Postmaster account. You need to have one single Postmaster account assigned
with mail or mailAlternateAddress as [email protected] with the
proper substitution for host and domain. Please verify the possible causes
of this startup problem with absence of Postmaster or existence of multiple
Postmasters in your messaging server. This problem may be caused by (among
other things) a Directory Server being down or still in the process of
starting up.
Please wait, retrying...
Startup Problem:
A required resource was not available to the Mail Server.
Netscape Messaging Server Exiting!

However, the Messaging Server log shows no errors.
Use the following steps to resolve the problem: 

<OL>
<LI>Check the Directory Server access log for a query that appears
something as follows: 

[10/Jan/2000:18:27:57 -0800] conn=15 op=1 SRCH base="o=airius.com" scope=2
filter="(|([email protected])
([email protected]))"
[10/Jan/2000:18:27:57 -0800] conn=15 op=1 RESULT err=0 tag=101 nentries=0

This log entry shows that the Messaging Server failed to find a postmaster
address (as indicated by
"nentries=0").
The postmaster mail address in the example above uses the
MessageHostName
in the /etc/netscape.mail.conf
file, 

MessageHostName=kwikimart.nasd.mcom.com

<LI>In the Administration Server 3.x, go to the "User and Group" interface.

<LI>Add the
postmaster@MessageHostName
to the group as an alternate email
address.

<LI>Verify that startup is successful. 

The Directory Server access log should contain an entry showing that the
search found one postmaster entry
(nentries=1).
For example, 

[10/Jan/2000:17:47:35 -0800] conn=617 op=1 SRCH base="o=airius.com" scope=2
filter="(&(|([email protected])
([email protected]))
(|(objectclass=mailrecipient)(objectclass=mailgroup)))"
[10/Jan/2000:17:47:35 -0800] conn=617 op=1 RESULT err=0 tag=101 nentries=1

Also, the Messaging Server log file should contain a successful startup
message, such as 

20000110174743:Dispatch:Start
</OL>

Hello,
that looks strange for me:
> sysnr=$$
Is the system-nr. of the r3-system perhaps 44 and you've accidently pressed the shift-key while typing?
Regards,
Norman

How to install and configure Sun java messaging server 6 2005Q4

Hi all,
Please tell the steps to install and configure Sun Java Messaging Server 6 2005Q4.
Thanks.

You aren't providing a lot of informations... in this case the answer could be: run the command
/cdrom/jes_05_q4_dvd/Solaris_sparc/installer
if you just want to install messaging server on a single host, for evaluation purpose, in the documentation
http://docs.sun.com/app/docs/doc/819-4879
there is an exhaustive guide. If instead you're trying to addres some specific question, then please give us more details such as O.S., schema version, and so on...
regards

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CR

ctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
                          |
                         V
              symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane.

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
with the above error message.

Hi,
I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
It may result from your Anti-Virus. Please refer to the following steps:
Open MCAfee Console and go to Access Protection window.
Click Anti-Virus Standard Protection and edit “prevent mass mailing
worms from sending emails” rule.
Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
Reset the IIS And SharePoint Timer service to check if this works for you.
Here are some similar issues with you, you can use as a reference:
http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
Best Regards,
Lisa chen

JCo destination/ SLD configuration/ message server GRANT POINTS!

Hi,
I am trying to create JCo Destination, using wizard when I get to the point 3.2 (message server) I do not have my message server listed in the drop down list, althogh it is up running on port 3601.
Here is an error message I ve got at the end.
SLD Data supplier service running and I have HTTP and RFC configuration in place
Thanks Denis
Failed to create new JCO client connection HR_Human_Resouces_Test: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_MsgServJCODestination.CreationClassName="SAP_MsgServJCODestination",Name="HR_Human_Resouces_Test",SystemCreationClassName="SAP_J2EEEngineCluster",SystemName="DE1.SystemHome.sbdevsqlsap2" at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:215) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:660) at com.sap.lcr.api.cimclient.CIMOMClient.createInstance(CIMOMClient.java:642) at com.sap.lcr.api.cimclient.CIMClient.createInstance(CIMClient.java:730) at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.createInstance(JavaCIMObjectAccessor.java:44) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:283) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)

Hi Denis,
The below is the Wiki which i have created, please go through the notes.
Configure SLD for JCo and Creation of JCo Destinations
To create JCo connections you need to configure SLD (System Landscape Directory) first and then create JCo destinations.
First lets see as how to configure SLD.
Start Visual Administrator.
To start it
1) Go to Server Installed path i.e. usr\sap\<systemid>\<systeminstance>\J2ee\admin
2) Choose go.bat and start it.
3) Under Global Server Configuration, choose <Serverid>.
4) Choose Services under it.
5) Find SLD Data Supplier.
6) Under System Landscape Directory select HTTP Settings.
7) Give all the required fields like Host Name, Port Number, User Name and Password.
8) Similarly choose CIM Client Generation Settings and give Host Name, Port Number, User Name and Password.
9) You can test the SLD is configured properly or not. Just click CIM Client Test.
10) Save the settings and close Visual Administrator.
Now that you have configured SLD through Visual Administrator, we can create JCo Connections. To create JCo connections
1) You will need Super Administrator permissions to create JCos.
2) Log on to the Portal.
3) Go to Content Administration  Web Dynpro
4) Since we have configured SLD, now we can see a button to Create JCo Destination. Click it
5) Now you can observe Create new JCo Destination on right side panel.
6) Give the Following Details.
a) General Data:
Name: Give the name of JCo
Client: Give the Client number to which system you want to create JCo for. Click Next.
b) J2EE Cluster: Check the Use Local J2EE engine. Click Next.
c) Connection Type: Select Dictionary Meta Data. Click Next.
d) Application Server Connection: Select the existing Message Server and Logon Group.
It might sometimes happen that Message Server and Logon Group is not configured to configure them, follow the process
For Message Server:
i. Log on to SDL through portal i.e. http://<servername>:<portnumber>/sld
ii. Choose Technical System. Click it.
iii. You will observe New Technical System button, click it.
iv. System Type: Select Web AS ABAP , if you want to connect to R/3 System and incase you are using Java application use Web AS Java
v. General: Log on to R/3 System through SAP Log on pad. Go to System  Status, check for SID, Installation Number and Database Host Name.
vi. Central Servers: Give Host Name and Port Number and Instance Number.
For Logon Group:
i. Click on Add New Logon Group, this will open a row in the table.
ii. Log on to R/3 through Logon pad and get Logon Groups ids and the transaction code is SMLG.
vii. Application Servers: Click on Add Application Server and then give Host Name and Instance Number of R/3 System.
viii. Clients: Give Client number (System id) and Logical Client Name (which we can get from SMLG code). And click finish.
7) Message Server Connection:
i. Name: Give the logon name of R/3 System
ii. Password & Confirm Password: Give appropriate password of R/3 System.
8) Click Finish.
regards
Anil

Instant Messaging Server configuration failed after installation

Hi,
I have a problem with the configuration of Instant Messaging server as part Sun Java Communications Suite 6u2.
IM had been installed using commpkg install --altroot -installroot /opt/sun/comms2 (should run in cluster environment).
Running configure failed when looking for package SUNWiimin. Due to the altroot installation the package information resides under /opt/sun/comms2/var/sadm/...
Since configure is just a shell script those incorrect calls could be fixed (e.g. pkgparam -R /var/opt/sun/comms2 SUNWiimin instead of
pkgparam SUNWiimin.
Unfortunately configure calls com.sun.im.config.core.Configurator as a Java program. In this program IM_BASE seems not tobe set which leads to:
Executing command : null/sbin/impermissions inetuser r /var
Error in executing command : null/sbin/impermissions inetuser r /var
java.io.IOException: null/sbin/impermissions: not found
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:53)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:429)
at com.sun.im.util.Command.execute(Unknown Source)
at com.sun.im.config.util.CommandExecutor.execute(CommandExecutor.java:134)
at com.sun.im.config.util.CommandExecutor.executeRuntimeCommand(CommandExecutor.java:41)
at com.sun.im.config.validation.SROValidator.createRuntimeDir(SROValidator.java:220)
at com.sun.im.config.validation.SROValidator.isValid(SROValidator.java:133)
at com.sun.im.config.validation.PanelValidator.isValid(PanelValidator.java:33)
at com.sun.im.config.core.CLIEngine.renderUI(CLIEngine.java:124)
at com.sun.im.config.core.Configurator.main(Configurator.java:157)
Return value: -1
Is this bug fixed somewhere??
Regards,
Rudiger

rudidotk wrote:
Is this bug fixed somewhere?? This has been known issue for some time that still hasn't been fixed:
bug #6733030 - "IM7.3: altroot installation causes configure to error with null/sbin/impermissions: not found"
Please raise a Sun support request to have this bug escalated.
Regards,
Shane.

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies th

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster." Pending fix of this glitch, is there a way to go back to previous version of Firefox that worked perfectly well?
== URL of affected sites ==
http://www.americanleather.com/ComfortSleeper/Madison.aspx?page=2

Hi JH,
According to your description, my understanding is that you got an error when you deleted columns in SharePoint 2010.
Please add the following string in <system.web> section of your web.config file :
<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never" />
Note: before changing web.config, please make a backup for the file.
Here are some similar posts for you to take a look at:
http://forums.asp.net/p/1355367/2778642.aspx
http://forums.asp.net/t/1166634.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

MESSAGING SERVER CONFIGURATION service.http.smtphost

Hi!
I've migrated from Messaging Server 6.3 to MS 7.0, in previous version there was a property service.http.smtphost, in this property I configured my Antivirus Server, but in version 7, where can I do this?, Is there an equivalent property/configuration?
Thanks!!

JulioMedjav wrote:
I've migrated from Messaging Server 6.3 to MS 7.0, in previous version there was a property service.http.smtphost, in this property I configured my Antivirus Server, but in version 7, where can I do this?, Is there an equivalent property/configuration?The parameter hasn't changed:
bash-3.00# ./configutil -H -o service.http.smtphost
Configuration option: service.http.smtphost
Description: SMTP relay host. If you are using LMTP, set this to the machine name of the LMTP host.
Syntax: string
service.http.smtphost is currently set to: 127.0.0.1Regards,
Shane.

Problem Upgrading ims 5.2 to Sun Messaging Server 6 2005Q4

I've an ims 5.2 running on an existing Solaris box, arnold. I'm planning to upgrade it to 6.2 on a new box, zion.
I've hit the following error when executing do_the_upgrade.sh.
Please enlighten me what it means.
[zi0n]# sh /var/tmp/UpgradeMsg5toMsg6.ScratchDir/do_the_upgrade.sh
admindomain = ou=portnet.com
encryption.nscertfile = alias/msg-arnold-1-cert7.db
encryption.nskeyfile = alias/msg-arnold-1-key3.db
encryption.nsssl3ciphers = rsa_3des_sha, rsa_rc4_128_md5, rsa_des_sha, tls_rsa_export1024_with_rc4_56_sha, tls_rsa_export1024_with_des_cbc_sha, rsa_rc2_40_md5, rsa_rc4_40_md5
encryption.rsa.nsssltoken = internal (software)
gen.accounturl = http://%[email protected]:2390/bin/user/admin/bin/enduser
gen.folderurl = http://%[email protected]:2390/bin/user/admin/bin/mailacl.cgi?folder=%M
gen.installedlanguages = en
local.ugldapdeforgdn = l=sgsin, o=portnet.com
local.webmail.da.host = arnold.portnet.com.sg
local.webmail.sso.singlesignoff = 0
nsserversecurity = on
service.http.enable = yes
service.http.enablesslport = yes
service.http.port = 80
service.http.sslusessl = yes
service.imap.enable = yes
service.imap.enablesslport = yes
service.imap.sslusessl = yes
service.pop.enable = yes
service.pop.sslusessl = yes
service.readtimeout = 10
Importing to local configfile...
Initializing LDAP connection...
Importing to LDAP...
[07/Jul/2006:00:04:02 +0800] zi0n [20061]: General Error: func=configmsg_setkeys; func=psetSetAttrList; error=Attribute does not exist

Thanks for the explanation.
I've managed to resolve this issue after realising
i've missed out a very critical step. Copying of the
physical mailboxes over to the new server.Yes, that's an important step....
>
I've however hit another issue with the activation of
SSL encryption on the v6.2 messaging server.
the current setup is as follows:
1) Applications installed locally:
- Sun Messaging v6.2 server
- Sun Directory Server 5.2 2005Q4 ( For config store
of messaging server)
- Administration Server 2005Q4
User/groups store is located at a existing Iplanet
v5.2 Directory Server.
3) Service account for Messaging Server v6.2:
uid=mail gid=mail
4) Service account for local directory and admin
server: root
Problem faced:
- I've used the cert wizard from the admin console to
generate a cert request and to install the cert
generated from the CA.
- I've also added the CA cert of the CA that has
generated my server cert.
- Next, i've tried enabled SSL encryption, specifying
the use of my newly added server cert. I've save the
settings before exiting from the admin console.
- However, when i login to the admin console to check
the settings again. SSL encryption is now unchecked.
- I've also facing problem stopping and starting
services using the admin console. Especially after
specifying the SSL ports to use for the imap, pop and
http services.
- When i was finally able to restart the services,
the system did not listen on the specified SSL ports.
It seems that my 'Enable SSL' setting also resets
whenever i exit from the admin console.
Greatly appreciate any help on this. Thanks in
advance.I suggest using configutil instead of the Console.
./configutil -o <setting to be changed> -v <new value>
Console is old and pretty flaky. It's going away in the next version.

Message Server 2005Q4 configure failure

Similar Messages

Maybe you are looking for