Message server name ?

Hi Guys,
I have configured RFC receiver with load balancing and it is giving errors with respect to message server
I have given message server name as he host name or it is is like SID+hostname ?
Message server service = sapms+SID and Logon group = PUBLIC as in SMLG transaction.
I have doubt about the attributes i need to set for Logon group and what shld be server name or shld i give the ip address ?
any help would be appreciated
Thanks,
srini

Srinivas,
Message Server : It would be your application server name or host name to which you are connecting.
Message Server Service : Check with your basis for this
System ID : It would be the SID of the system. It is of 3 letters.
Logon Group : Since you are using Load Balancing check with your basis through which logon group you want to connect.
---Satish

Similar Messages

  • Message server name - Urgent

    Hi SAP experts,
    When I am trying to create JCO connections the sytem is asking for message server name and the logical client name.Could anyone tell how to check .It's very urgent.
    Vishnu.

    hi Vishnu,
    For the message server u can try the host name of your target system and the logical system can be known by tcode SCC4.
    Hope it might be helpful.
    Dont forget to award points.
    Regards
    Parth

  • How can i find SDM port , Message server port, Message server name?

    Hi All,
       I am tring to deploy a ear file from NWDS.
    I am trying to congigure through
      Windows>Preferences>SAP J2EE engine -- Remote.
    I have these questions.
    1. How can i find Message server Host?
    2. How can i find Message server Port?
    3. How can i find SDM port?
    4. What is the difference betweent the Message server port and SDM port? Both are same or can be different?
    5. What are the ways to deploy a ear file on remote J2EE engine ?
    6.Can I run SDM from a remote mechine and connect to the server?
    7. When i am trying to deploy a ear file i am getting
      "Cannot determine sdm host (is empty)" what is the possible reason.
    (Here i used information from /usr/sap/GXI/DVEBMGS00/j2ee/cluster/instance.properties for server host and port number)
    Thank you
    Ganges Leaves

    Hi Ganges~
    Please check this link~
    Deployment Problem
    Could not start SDM Server
    SDM setting the target system for j2ee engine
    "No route to host" - SDM
    SDM Error
    Can not deploy. sdm host is empty
    Hope this helps,
    regards,
    moorthy

  • BW Publishing using SAP message server

    SAP authentication is configured using a message server on a logon group. The authentication works fine for the logon process; however, there is an issue publishing documents using BW publishing feature. During the publishing process the follow error is displayed "An error occurred while saving and/or publishing. The return code 99 was from the server. Error while communicating with Crystal Enterprise; check SAP Gateway."
    In addition, the BW publishing service is working fine by connecting to an application server instead of a message server.
    Has anyone used the message server/logon group in the BW publishing process successfully?

    Initially, in the entitlement systems tab of the SAP authentication in the CMC, a message server and logon group were used for setting up the SAP authentication, but not the application server and system number.
    The BW Publication configuration was exactly configured as per the process described in your book.
    Yes, we could save reports.
    Yes, we could import roles
    Yes, necessary rights were assigned
    In the BW source parameters, in the parameter, Application server, the message server name (FQDN) was entered and other parameters were LOGON group and system number.
    The environment is a Linux Red Hat 5, Production cluster with 3 BOE servers, SAP message server port is set to3600, SAP gateway port is 3300and connectivity from BOE server verified on both 3600 and 3300 ports.
    SAP server was able to connect with BOBJ server on the SSH port 22

  • Jco meta  data server is to be message server ?

    When I configure Jco's meta data server, Portal prompted message server name. We got only one message server for PRD. Is there any way to get connected to the single server ?
    Thanks in advance !

    You must connect to a message server / group for the metadata connection.

  • Where to find Message Server port ?

    How can I find the message server port on my portal server installation ?
    - punam

    Hi Punam,
    There are various ways of finding this out. One way is that you check the following log file and you can see the message port for your system. As far as I remember default port is 3601 but anyway confirm it in this file
    parameter is ms port
    C:usrsap<SID><INSTANCEworkdev_* files for ex dev_jcontrol
    You can also find this from SAP MMC as welk. Check developer trace after right clicking on message server process.
    Also check out similar thread:
    How can i find SDM port , Message server port, Message server name?
    Regards,
    Piyush
    ps: please mark all useful answers.

  • Messaging Server 4.15 & firewall problems.

    I have Messaging Server 4.15 behind a firewall & external mail server in DMZ. My customers strongly don't want to show their internal information in
    the mail headers (hosts names, iPlanet Messaging Server name...)
    1. Can I change mail server info & can I remove some information (iPlanet Messaging Server version, user host name & ip) from the mail headers?
    2. As far as Messaging Server 4.15 is behind a firewall, some mail servers, which check sender's domain name, can't receive my customers mails (they
    can't find iPlanet Messaging Server name because it is behind a firewall). How can I solve this problem? Will the change of mail server info in mail headers help me?

    Removing such information is generally frowned upon by the community. By altering such information you could prevent mail from being delivered successfully.
    As for point 2 even if your hosts are behind a firewall there should be public DNS records for them. It usually can be something generic like h-10.0.0.1.domain.com so that no real information is given away but other hosts on the internet can determine who you are.

  • '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

    '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
    I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
    Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
    Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • Server name message when triggering process chain through ABAP PROGRAM

    Hi all,
    When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
    CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
         EXPORTING
           I_CHAIN      =  'XYZ'. ( Dummy Process chain name)
    While executing this program I am getting following message :
    You can specify the name of the application server here
    on which all jobs in the chain are scheduled
    If you do not specify a name, the jobs from batch
    management are divided between the available servers
    How to avoid this message.
    Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
    Your help is much appreciated.
    Thanks,
    Uday.

    Hi Shanthi,
    How to write exception handling for this.
    Quick reply is nedeed.
    Thanks,
    Uday.

  • Scan to Email Error Message "cannot connect to server. check server name and address"

    I have a HP Officejet Pro 8600 Plus. 
    I've been using this printer for several months.  Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address" 
    I'm not sure how to check this.  We can all still print remotely via the internet connection. 
    Anyone have any ideas?

    Thanks for the info.,
    Did you recently change your operating system or network router that started to cause this error?
    Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
    You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
    Thanks

  • Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Did you reboot the TC? That is always the first step.
    Reboot the whole network if that is not enough.
    If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
    We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

  • TS4104 I am receiving the following error message: There was a problem connecting to the server "Diane's Time Capsule" - check the server name or IP address, then try again.

    I am receiving the following error message: There was a problem connecting to the server "Diane's Time Capsule" - check the server name or IP address, then try again.

    This might just be a typical Mountain Lion network glitch..
    Reboot the TC.. that is usually enough to fix it.
    Otherwise restart the whole network from off.. Reboot items in correct order.
    Modem.. TC.. computer. 2min gap.
    Tell us if that doesn't fix it.

  • RFC error code 91 : Host name  or service of thge message server unknown

    RFC Test connection is getting failed with following error
    ERROR                service 'sapms<sid>' unknown
    LOCATION             SAProuter 37.12 on prosaprt01
    DETAIL               NiPGetServByName: service 'sapms<sid>' not found
    CALL                 getservbyname
    COMPONENT            NI (network interface)
    COUNTER              5088
    MODULE               niuxi.c
    LINE                 524
    RETURN CODE          -91
    SUBRC                    0
    RELEASE              640

    Hi Cool,
                  Make sure on your server(if it's windows)
    C:\WINDOWS\system32\drivers\etc\services is having this bellow line
    sapms<SID>     36<nn>/tcp     # SAP System Messaging Service Port
    I guess you can realize that 36<nn> is the messaging server port, so you can in put your system no. in place of <nn>.
    If you are trying too connect to another system and make sure it's port is also added in the service file and it's open (accessible from this system).
    Regards,
    Hari.

  • Site gives message Server not found; ;Firefox can't find the server at (site name). Address is correct, network is connected. Don't have problems with most sites. Others can access this particular site easily.

    Can't open any of the National Parks Service Civil War Soldiers and Sailors Systems sites. Get the message Server not found although others are able to open it easily. Network connection is good and addresses are good.
    == URL of affected sites ==
    http://www.civilwar.nps.gov and all National Parks Service Civil War Soldiers and Sailors System

    Such behavior can be an indication that you are infected.<br />
    In such a case you can use another computer to download the program and save the file to an USB stick.<br />
    Be sure to download the latest databases.
    You can try an online anti-virus scanner.
    * http://www.google.com/search?q=Online%20Antivirus%20Scanner
    * http://housecall.trendmicro.com/ HouseCall - Free Online Virus Scan - Trend Micro USA
    * http://vms.drweb.com/online/?lng=en Dr.Web - innovation IT-security solutions. Complex protection against Internet threats.
    * http://www.eset.com/onlinescan/ - Free ESET Online Antivirus Scanner

  • How do I set the mailhost attribute in Messaging Server 3.5?

    <B>Intent of the hostname aliases feature: </B><BR>
    In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
    instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
    want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
    the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
    you want to be able to move a group of users quickly from one Messaging Server to another.
    <P>
    <B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
    Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
    have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
    MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
    /etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
    server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
    installed.)
    <P>
    With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
    colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
    colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
    (MessageHostName), and if they match, the server considers the account to be local. <P>
    For example: <BR>
    MessageHostName=red.company.com,green.company.com,blue.company.com
    <BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
    entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
    wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
    <P>
    In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
    blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
    DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
    red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
    not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
    in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
    be considered local to this machine.
    <P>
    Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
    MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
    16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
    migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
    attribute is recommended.
    <P>
    In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
    on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
    server, i.e. host.company.com
    <P>
    </A>A note about DNS
    Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
    A 128.101.101.101
    CNAME
    <P>
    Additional MX records are not required to use hostname aliases.
    <P>
    If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
    Cricket Liu.

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    See "Firefox connection settings":
    *[[Firefox cannot load websites but other programs can]]

Maybe you are looking for