Message Server Port and Instance Number

Hi All,
I need to create Technical System and Business System in SLD for my IDOC-XI-FILE Scenario. There i need to specify the Message Server port under Message Server and Instance Number in Central Application Server. Please let me know where i have to found these. Please help as soon as possible.
Thanks & Regards,
Nagarjuna.

Hi Nagarujna,
Instance Number : - just check the logon pad.. select your Ecc or R/3 system and click on chane item.... Usally it is 00.
Message server port : it is 3600 + instance no.
3600 + 00 = 3600
Sachin

Similar Messages

How can i find SDM port , Message server port, Message server name?

Hi All,
I am tring to deploy a ear file from NWDS.
I am trying to congigure through
Windows>Preferences>SAP J2EE engine -- Remote.
I have these questions.
1. How can i find Message server Host?
2. How can i find Message server Port?
3. How can i find SDM port?
4. What is the difference betweent the Message server port and SDM port? Both are same or can be different?
5. What are the ways to deploy a ear file on remote J2EE engine ?
6.Can I run SDM from a remote mechine and connect to the server?
7. When i am trying to deploy a ear file i am getting
"Cannot determine sdm host (is empty)" what is the possible reason.
(Here i used information from /usr/sap/GXI/DVEBMGS00/j2ee/cluster/instance.properties for server host and port number)
Thank you
Ganges Leaves

Hi Ganges~
Please check this link~
Deployment Problem
Could not start SDM Server
SDM setting the target system for j2ee engine
"No route to host" - SDM
SDM Error
Can not deploy. sdm host is empty
Hope this helps,
regards,
moorthy

Changing message server port for ABAP+Java Instance

Hi,
We had change our message server port for the Java instance from 3607 to 3667.
We did this using the j2ee config tool. We also verified this information through the console config.
But when we look into system info URL using the URL as shown below, we still that the old message server port is being used. We have recycled the instance couple of times , but does not seem to help.
http://dfudsbw1.dfna.corp.dom:50700/sap/monitoring/SystemInfo
Any ideas where else we have to change the port no. for the message server

Hi guys,
I solved this on my own with documentation help from SAP.
I had to change the port no. in the Global dispatcher and Global server area as well.
Please see details from SAP below.
"Message Server: Changing Ports/Hosts shows which areas need to be adjusted if
the port or host of the message server changes. Ports are, of course, changed in the
instance profile of the Central Services instance. In the example, the port 3677 and
the HTTP port 8177 have been set, and the new host is called twdfxxx. You need to
use the Config Tool to set these values. For each instance, you need to maintain the
corresponding values for the Message server host and Message server port on the
Message Server and Bootstrap tab page. The connection details for dispatchers or
servers to the message server are maintained in the Cluster Manager. As shown in the
figure, the ms.host and ms.port are maintained, respectively, in the Cluster Manager
with Global Dispatcher and the Global Server. After you have maintained all of the
parameters, you can start the instances."

Determining Message Server Host and Port information

Hi,
I am working on the NWDS creating a Java WD application and I was told which Netweaver system I should work on but I was not told the Message Server Host information neither the Port information. I ran transaction SM51 (right click->details)in the Netweaver system but the information it is not working. Even though I can telnet this server port if I go to the J2EE Engine window within the NWDS I do not see the green light. I just see "N/A". I also tried to deploy my application but I keep getting this message: "Cannot determine sdm host (is empty). Please configure your engine/sdm correctly".
Please advice,
Diego.

Hi Diego,
in order to see Message Server Host information and Port information go to SAP J2EE Engine start page: e.g. http://system-name:57100/index.html (use administrator pws).
Then click on System Information, here on the top you can read the Message Server Host and Port.
Hope this help you.
Bye,
Vito

Message Server Port

Hi,
Please let me know where can i find message server port number in CE 7.1 EHP 1
regards
swetha

Hi,
1.Go to http://localhost:50000/index.html
2.Click on "System Information"...we will get "System Info" and "Components Info" right side
3.Under System info we'll see Instance table.From that click second one in the list "SCS".Down details we can see
message server port
Message Server Host: localhost
Message Server Port: 3901
Enqueue Server Host: localhost
Enqueue Server Port: 3201
Thanks,
Murthy.

Check message server port

Hi all,
please show me how to check one message server port of a SAP system.
regards,
Chuong Hoang

Go to XI server system and open the Config Tool. There, for each installed instance, a message port and message server host is mentioned. Click on any instance and u will find the required info under tab "Message Server & Bootstrapu201D.
Regards,
Prateek

FPN configured for message server port

Hello,
I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or see remote roles via Identity Management (when I switch the config back to point to port :50000 in the Producer object on the Consumer it works fine again). I'm not using a SAP web dispatcher between the two portals but Producer portal is indeed listening on port :8101 since I can hit it directly. Is this a limitation of FPN?
My http trace shows an ABORT message when trying to connect with the :8101 configuration.
The 8101 port is necessary to be configured in order to leverage our clustered load balanced environment which has the 8101 message server port listening and redirecting to a cluster of servers.
Patrick

When using Remote Delta Links one can configure the SAP Message Server's RMI-P4 port (3901 by default) for RMI-P4 communication.
For the HTTP load balancing you cannot configure it to point to the HTTP port of SAP Message Server (8101 by default) only the application server's HTTP port on the Central Instance (e.g. 50000) can be used.
But don't bother yourselves with this, because SAP recommends using SAP Webdispatcher for HTTP load balancing in FPN scenario, so don't use SAP Message Server directly for HTTP load balancing in the FPN connection setup!

Where to find Message Server port ?

How can I find the message server port on my portal server installation ?
- punam

Hi Punam,
There are various ways of finding this out. One way is that you check the following log file and you can see the message port for your system. As far as I remember default port is 3601 but anyway confirm it in this file
parameter is ms port
C:usrsap<SID><INSTANCEworkdev_* files for ex dev_jcontrol
You can also find this from SAP MMC as welk. Check developer trace after right clicking on message server process.
Also check out similar thread:
How can i find SDM port , Message server port, Message server name?
Regards,
Piyush
ps: please mark all useful answers.

Lumira Login Error "Check the Server Name and Instance ID"

Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectify

I wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

The difference of minor number and instance number

I study how to develop device drivers. I am beginner.
I'm confusing the differece of minor number and instance number
what is the exact difference of them???

Hi,
I guess a good example would be a disk. Each disk you have would be a different instance. To use a disk it is divided into slices, each of which has a different minor number.
Your device driver needs to map the minor number to the correct instance of the device. How you do this is completely up to you, so to start you could map them one to one.
Hope that helps.
Ralph
SUN DTS

How to get the server port and id from the Initialcontext

hi
i know that i can get the server port and id where the jndi service is listening from the InitialContext ( when i create InitialContext ic = new InitialContext(); from within a EJB. ). Does this work on any application server and where (at what position is for example the port) in the Enumeration at the ic are the different things put?

I would usually just get the PROVIDER_URL property from the InitialContext and use that to determine the location of the naming service:
String providerURL = (String)ic.getEnvironment().get(Context.PROVIDER_URL);You'll then need to parse that string to obtain the port and the server name. For example:
// Assume that the provider URL is of form "protocol://server:port"
int serverStartIndex = providerURL.indexOf("://" + 3);
int serverEndIndex = providerURL.indexOf(:, serverStartIndex);
String server = providerURL.substring(serverStartIndex, serverEndIndex);
String port = providerURL.substring(serverEndIndex + 1);It's a fairly universal approach but there'll doubtlessly be some special cases (for example, the provider URL could be null and the InitialContextFactory class defaults it).
You might have to adjust the server/port parsing stuff a bit as I just made that up and your URL might not conform to the pattern I described.
Hope this helps.

Hostname and Instance Number

Hello,
I have installed SAP hana studio and client on my personal computer.
How can i find the hostname and instance number when adding a system in Hana studio?
Thank you.

You must have access to some Hana installation, in a cloud or elsewhere. See the CSN Hana home page http://scn.sap.com/docs/DOC-31722 for some examples. If you already have access to Hana, you should know the IP or hostname of the computer where it is running.
-- Micha

How to determine the Message Server ipaddress and Port Num

Hi All,
I installed SAPR/3 4.7EE on windows with Local Installtion on windows and the SystemNumber is 00.
I am developing one SAP Load Balancing System Object in the Netweaver Portals,at the time of creating it is asking the values of Message Server IP addess and the Port number.
Can i give the same ipaddress of SAP R/3 server as Message Server Ip or its different? If it is different, How can we determine the Message Server IP addess and the Port number?
Regds
Phanikumar

Hi Pahani,
Message server ip is nothing but your server IP if it is stand alone and port is 3600.
if you want to check the info got to tcode SMMS>GOTO tab select PARAMETERS>display.it will show the info.
cheers
Shyam.

What is the message server port on an WAS JAVA 7.0 instance.

I am reading a document that says it is 36NN, where NN is the instance number.
But the problem is that I checked the server and it is actually running on 39NN
where NN is the instance #.
When did they change this?
Thanks

I first saw 39NN with 2004s. With 2004 it was always 36NN.
Regards,
Christophe

How to see Dispatcher, gateway and Message server port numbers?

Hi All,
Can any body tell me how to know the port numbers of dispatcher, gateway & message server in a particular sap application server.
Thanks & Regards
Srinivas K

Hi,
This is very work around way...
SM51-Choose theserver-there one icon (Magnifying glass) choose detaiols -
There you will get dispatchet port.
SMGW -
dispaly file(icon) -
in that you can find the port on which gate way is working.
SMMS-goto-parametere--display...you can find the port for MS.
SMMS -goto-display details (will give more info) you can find diff ports ...
Apart from these all these services when they start they write log in work dir there we can find which port they are using while starting ..
We can find them in the individual monitoring t-codes like SMMS,SMGW,SM51 etc..or from AL11 go to work dir and look at dev_disp,dev_ms,dev_rd.
This is all very work around...
The best will be services file at os level.
Thanks.

Message Server Port and Instance Number

Similar Messages

Maybe you are looking for