Message settings for Printing a Contract

Friends,
Please let me know the message settings in detail for printing a contract.
Thanks

This is same as PO..
Follow steps for contract just like PO setting..

Similar Messages

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • I have a Laserjet 2550L. When I try to print 2nd time get message "Waiting for printer to become ava

    Laserjet 2550L being used with Mac OSX Lion 10.7.3. After turning on, it will print once. When trying to print a second time I get a message "waiting for printer to become available." I have to turn it off and then back on to get it to print again.

    Hum. Let's uninstall with the 'scrubber option' like this:
    1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
    2. Highlight your device on the left pane
    3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
    4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    5. Click Continue and let it finish
    Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
     Next, let's reset the printing system:
    Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Let me know how this works for you.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

  • Message settings for Output determination.

    Hi,
    What does the message settings in output determination referst to.
    What are all the configurational steps involved in it.
    If possible please provide me the link to get more details on the above topic.
    Regards,
    RitiG

    Hi,
    Output determination is the way to explain how any output will go from SAP system.This output can go through..Printout, Fax,Email, ALE...etc.
    Please go through this BLOG, you will have a fair idea about process and configuration steps.
    <a href="http:///people/gajendra.bhakuni/blog/2007/03/13/message-control-output-control-for-ale Determination</a>
    Regards,
    Sachin

  • Preferred Sharpening Settings For Printing

    What sharpening settings do you folks normally use for printing to matte, luster and gloss papers from Aperture?
    Lightroom has an algorithmic output sharpening feature that takes the image size, output resolution and media type (probably more things, too) into account. I'd like to replicate that with somem print presets in Aperture.
    Bob

    Thank u, sorted it out, The problem was that I was inputting Send and Archive instead of Send Only.

  • Need suggestion on Color Profile settings for printing image

    I am trying to print the image below on a Xerox Docucolor 242.  Im trying to get a better understanding of profiles and all that, which I THINK I do now.
    Under Color Settings in Indesign, I have under Working Spaces, RGB is set to my monitor brand and type and CMYK is set to my exact printer.  I have both of the Color Management Policies set to Off.
    When I print the RGB version of this image, everything looks ok except for a very faded look.  Probably noticed mostly because of all the black background that is used.  When I print the CMYK version of it, it seems to print nice and dark but there is a strong white halo effect showing around both the flames which doesnt show on the screen or the RGB printout.
    Anyone know what settings are causing the faded look in the RGB printout and the halo effects in the CMYK printout?

    As others have said, this is a complex process, but one that is solvable.
    I agree with others the RGB profile should NOT be the monitor but the profile of the original image. For most midrange cameras this will be sRGB or Adobe RGB depending on the settings in the Camera when the images was captured. It is NOT arbitary and choosing the wrong profile will have a large affect on the image.
    The CMYK profile for the printer is more complex. There are two steps in calibrating and profiling a Xerox printer. First the calibration, or linearisation, sets the printer to a known state that can be repeated. This is best done with a spectrophotometer and not the CalorCal software provided by Xerox which uses a known colour chart scanned from the glass of the copier. The glass method of calibration does not calibrate correctly at the black end of the curve actually turns over reducing the available black, and is due to reflections from the glass. Calibration is normally done daily.
    When the calibration has been completed a full ICC profile is created by printing a profile chart of some 2000 colours and reading this with the spectrophotometer. This is only valid for a calibrated printer and for the type of paper used. Different papers will require different profiles. It is a once only operation.
    Another thing to watch out for is how your RGB images are being converted to CMYK. There is a setting both in the Creative suite and in the printer to set the black compensation. What you want to achieve is the same black as in the original image. In the CMYK case this will be printed as a combination of black toner pus a mixture of CMY to incread the density. The profile takes care of this for you.
    Your description of weak blacks suggests that the black me be being printed as pure black toner.
    Ian
    NZ ColourManagement.

  • How do you access full printer settings for printing?

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    The Advanced tab comes up after you press print on the 'simple screeen'.
    Oh Well.
    Ac

  • How do you access full printer settings for printing? (sorry if duplicate)

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    on the first print page click print after you have done any themes, etc you want. On the second print page click advanced - you should find them on the thrid page then
    Larry Nebel

  • Export preset settings for Print Media?

    i am about to set down and follow rudy gay's tutorial on exporting images with a logo overlay (thanks for all the help in finding this document) and i am wondering if there are an expert or two on the list that might be able to share screenshots of their export presets.
    i have gotten to the point where i have applied metadata to imagery and i had a request recently to send in images that are larger than 1 MB but i have been really confused as to what i am doing here. for instance, i have three projects that were created by importing folders of images from this person which have imagery:
    "print" project = 24.75 MB 2400 x 3600 px
    "ppt" project = 505 KB and1024 x 683 px
    "web" project = 324 KB 1024 x 683 px
    i /think/ all of these are 72 dpi but i am not sure how to check this.
    plus, i just ran an export as JPG at 100% size from the PRINT project and they all landed on my desktop at something over 1 - 4 MB in size.
    basically, i am hoping that someone wouldn't mind sharing their settings and perhaps a little bit of an explanation so i can start to teach myself how to make this work better over here.
    i realize that some of these things may be considered particular to an individual or even proprietary in some way but anything i can get on this will put me much farther ahead than i am now.
    TIA
    jon

    I apologize for not getting to this sooner.
    How are you viewing the PDF that shows the discoloration? Acrobat or some other application? Is overprint preview turned on in Acrobat?
    This is definitely transparency related. When you choose PDF 1.3 you are flattening the transparency and the white lines you see are called "stitching." Thay ae a dispaly artifact in Acrobat (they'll disappear if you turn off smoothing), and though they may show in a low-resolution digital print, they are usually not apparent in high-resolution output from a press.

  • Message settings for physical Inventory in Warehouse mangement

    Dear All,
    I have one issue which is as follows.
    I created physical inventory record using MI11.Entered the count.The count entered is more than the book count.Now when I enter qty more or less than the book quantity system needs to through an warning message for this.
    How to set the above settings in warehouse management physical inventory process.
    Thanks in advance.
    Babu

    Hi,
    Go to OMCQ transaction and create mesage and make accese sequence and condition table and all for this message.

  • Where is best place to make settings for printing on 8"x10" paper?

    Does PS interpolate (scale?) my final print image when I set the size paper I'm printing to? I would like to avoid that.
    I want to combine several photos into a single image and print on 8"x10" paper w. 1/2" borders. Where is the best place to make these settings in CS6?
    Do I set my canvas dimensions in the "New File" dialogue box to Width: 7 inches and Height: 9; and then choose 8 x 10 paper size when printing, which leaves 1" for borders?  Or do I go to "Image Size" and make the settings there? Or in the Print Dialogue box?  Thanks.

    I would suggest the Print Dialog. Here your printer would be set to 8 x10 paper (borderless),but in the print dialog under "Scaled Print Size",you would set the print size you want without resampling.
    At least that's what I would do for a single project. Start by checking "Scale to fit media" so that you start with the entire image.
    Keep "centered" checked. Then uncheck "Scale to fit Media" and dial in your settings.

  • Where are the settings for printing onto thicker?

    Hello.
    On my new MacBook Pro OS X 10.7.2 I have not been able to locate the printer settings that allow one to specify paper type (i.e., paper thickness). I used this feature frequently on my previous MacBook as it allowed me to dramatically improve the quality of printing from my laser printer when printing onto various thicker paper stocks. I sooo hope it's still there and I'm just overlooking it!
    Many thanks in advance,
    Liz

    A few things to check (apologies in advance if you have already checked these).
    The default print dialog for many apps does not show the printer menus. For some you need to press the Show Details button. For others you need to press the Printer button on the bottom of the print dialog to access the printer menus.
    Another thing to note is the driver. If you were using a different driver on a previous version of OS X, the new driver to support Lion may not have the same menus. If you can tell us the model of printer you have and possibly the version of that driver (this can be found in System Information > Printers) then we could download and install this driver and have a look ourselves.

  • Print Settings for Printing Dashboard Pages

    It seems the page size selector on the dashboard print control menu does not impact the size property of the document sent to the printer.
    When Legal paper size & Landscape orientation are selected, the document saves the landscape orientation, but when exported to PDF, the paper size automatically adjusts to Letter size, not Legal size.

    Hi
    INS - Invoice plan, this condition type need to be used only where you have invoice plans maintained in the Purchase order.
    MRIS - Invoicing Plan Settlement , this is the transaction to be used for Invoice Plan Settlement.
    So you cannot directly maintain the condition type in the messages in MIRO transaction
    Thanks & Regards
    Kishore

  • Where can I find the settings for printer ? How can I send to printer from iPhone

    I'm frustrating with the printer not found from my iPhone and iPad. 
    This question was solved.
    View Solution.

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use these to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    iPhone: http://www.apple.com/support/iphone/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • OBE-15409: Error in loading constraint information

    Hi, I'm having a problem with the Query Builder in Reports Builder. When selecting a table with any type of constraints I get the following type of error message (Emp in user scott/tiger): OBE-15409: Error in loading constraint information for EMPNO

  • Cant accept/decline License Agreement

    I really cant accept this (when i clicking it, nothins occurs) [URL=http://img178.imageshack.us/img178/7431/licensehc2.jpg][IMG]http://img178.imageshack. us/img178/7431/licensehc2.th.jpg[/IMG][/URL] Crap =(

  • Schedule line tab combined with Aditionnal Data B item tab

    Dear people, Do you know if there is a user exit (or another thing) that works before the schedule line tab for an item of a sales order is displayed. Specifically the functionnality we are developping is: We are creating SCH line in the standard tab

  • Helpp please Error in Showing the URL

    Hi all!!! Im a beginner I wanted to use servlet I use the functions:http://www.coreservlets.com/Apache-Tomcat-Tutorial/#Start-Server in this site to use the tomcat and everything is fine even I use startup.bat and it works fine no error is there but

  • Updating PCR Adobe Forms to Layout Type ZCI

    I came across OSS Note: 956074 and am trying to determine if the PCR Adobe Forms we are using need to be update to layout type ZCI. When I execute the program in SA38: FP_CHK_REPORT and provide ISR_FORM_SPSE as the form I am getting a logon box to Ad