Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Similar Messages

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

Send IDoc from SAP SCM to XI

Hi,
Can somebody give me step by step procedure to send IDoc form SAP SCM to XI. We are not using ICH. IDoc is coming to SCM through EDI. Once it is posted in SCM, we want to send it to XI. We had a option of sending directly to XI through EDI connectivity, but for some reason we want to post it in SCM and then send it to XI.
Thanks,
Sanjay

hi,
sending IDOCs to XI is always the same
apart from documents section in the XI FAQ (link below)
when you can find some IDOC weblogs
you can also find lots of configuration examples for IDOC-XI scenarios in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file

Hi All,
We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM).
Regards,
Theo

Hi Theo,
there is an example in SAP Library: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm">Collecting and Bundling Messages - One Interface</a>. Plz post us your detailed quetions.
Regards,
Udo

Unable to send IDOCs from SAP PI 7.3 system to a NON-SAP system

Hi Experts,
We have a simple file to IDOC scenario in our SAP PI system. There is no mapping as the file is already in the IDOC-XML format.
However , the target system is a NON-SAP system. We are using a TCP/IP RFC destination to connect to it.
Here are the settings we have done,
1) Creates a 3rd party technical system and business system in SLD.
2) We have assigned a logical system name for the business system (LSKABA100).
3) Created a port in IDX1 with the same name LSKABA100 and assigned the TCP/IP RFC destination. The RFC destination is pinging fine.
4) Imported the metadata for the IDOC from a SAP port and copied the same to LSKABA100 port.
5) Created the sender agreement, receiver determination, interface determination and receiver agreement in ID.
When we send the file, there is an error on SM58 transaction of our PI system. It says "RFC_ERROR_SYSTEM_FAILURE: IDocException occurred."
Other than that it does not provide a lot of details.
We have seen this thread and this blog but did not get any break through.
Please help us, if someone has any ideas.
Best Regards,
Ravikanth Talagana

Hi all,
I am not using any SAP Jco user either in my config or in the RFC destination.
What is the user id that needs to have the authorization?
I am using a TCP/IP RFC destination and it does not have any user id/pwd.
There is also, no problem while doing a connection test to the RFC destination.
Best Regards,
Ravikanth Talagana

Sending IDoc from SAP ECC6 to SAP BC: IDOC_ERROR_METADATA_UNAVAILABLE

Hello,
I am posting an IDoc (COSMAS01) from SAP Backend to SAP BC 4.8.
I am getting this Exception:
2010-04-01 12:17:08 CEST com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "??????????????????????????? ?" with extension " COSSAPRGL RGI_0 ???" is unavailable.
 at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:126)
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.<init>(JCoIDocDocument.java:92)
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:170)
 at com.sap.conn.idoc.jco.rt.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:80)
 at com.sap.conn.idoc.jco.JCoIDoc$DefaultJCoIDocRuntime.createIDocDocumentList(JCoIDoc.java:144)
 at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:107)
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:153)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3300)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2780)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2598)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2489)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2310)
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:277)
 at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:337)
 at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:238)
 at com.wm.util.TimeWrappingProvider$TimeMesuredTask.run(TimeWrappingProvider.java:40)
 at com.wm.pkg.sap.rfc.ListenerThread.run(ListenerThread.java:70)
2010-04-01 12:17:09 CEST com.sap.conn.jco.JCoException: (104) RFC_ERROR_SYSTEM_FAILURE: IDocException occurred (raised by system AS-RGAG-01|a_rfc)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:639)
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcS
I have manually loaded the IDoc definition in the DDIC cache of the SAP BC, but this was of no help.
For me it looks like an encoding problem as the the JCO adapter seems not to be able to even identify the basic IDoc type, or what else can this mean?:
The meta data for the IDoc type "??????????????????????????? ?" with extension " COSSAPRGL RGI_0 ???" is unavailable.
It is a simpe COSMAS01 IDoc with no extension, btw I tryed other IDoc types as well but I am allways getting this weired message.
Any ideas?
Thanks
Matthias

Hello Rajesh,
as far as I know, I do not have to do this bevorehand.
Normally, the SAP BC is creating a routing rule on the first reicipt of an unknown message (IDoc) .
But in order to do so, it needs to interpret sender | receiver | message type , on which it in my case seems to fail.
Thanks Matthias

QRFC/TRFC for sending idocs from SAP system to XI

Hi experts,
The standard program RFFOEDI1 generates payment orders - first PEXR2002 and then EUPEXR idocs. These idocs are to be sent to the bank from SAP through XI. Bank partner profile is maintained. But these idocs because of TRFC are not getting sent in the order in which they are generated by the SAP system. So I changed the bank partner profile settings from TRFC to QRFC and gave the rule name as first 16 of mes type. But the idocs are struck in the SAP system. Is there any standard program to be run to send the idocs out from SAP system or is it automatic.
Please suggest a standard method which is to be followed to send the idocs in the same order in which they are getting generated for the scenairo above.
Regards,
Asha

Hi Asha,
As you said Idocs are stucking,
To send Idocs to XI, you must have maintain some settings in XI to receive Idocs. Once they are done properly .in R3 side standard way to send idocs to XI is Maintaining Change Pointers and shedule the programe to trigger that most of Standard idocs will have standard programs to catch change pointers and send them to external system.
and to maintain the same order of idocs there is a setting called Quality Of Service in XI side ,that option should be set to Exactly Once In Order .
Regards,
Ramesh.

Sending IDOCs from SAP R/3 to XI

I have ALE set up to send an IDOC on every Material master change or create. This works fine so far - only after creation I do not receive the IDOC on my XI system's IDOC Adapter.
In the Transactional RFCs (sm58) I can see the following error message for my call:
"No Service for System SAPS48, client 010 in Integration Directory"
After all I've read I assume this has to do with the Business Systems in my SLD and the ones associated in my Configuration....
Can anybody help me on what exactly to set up and how it must be called so that the IDOC is received correctly and passed to the XI engine?
kind regards
Peter

Hi,
thanks Sridhar - I read the threads and tried to follow the comments, but I still have this problem.
What is not completely clear to me is the following:
It looks like SAP is checking for some very particular naming conventions in here. What exactly has to be named after what. My Business System is named S48 and has the Technical System S48 associated with the Logical System Name 'SAPS48'. Does this have to match the logical system name in 'SALE' and how does it relate to the Port I specified in 'IDX1'?
Any further help is very much appreciated...
regards
Peter

Create a RFC SEND IDOC FROM SAP TO NON SAP

Hi Gurus,
I tried to create a RFC to send my IDOCS to a Window Server.
The administrator has created a share like eg.: \\hsare\idoc_received
How should I do to attempt this share?
I created a TCP/IP RFC and in program ID, I put the path but the connection does not respond.
Anybody could help me please or has a suggestions?
What is the best solution to send the IDOC to this place ?
Thank you in advance for your help.
M.

Hello Rahhaoui,
There are enormous information available on SCN about FTP file transfer
For your reference you can check this wiki:
File transfer from Application Server to FTP - Contributor Corner - SCN Wiki

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

Missing IDOCS from SAP to BODI

I have an issue of missing idocs from sap going to BODI.
Idocs are received by BODI trough adapter, but there are idocs that are missing but are successfully sent by SAP. When trying to resend the idocs it was successfully received by BODI.
We thought that it is an intermittent connection issue, so we try to send idoc from SAP while the adapter was down. The idoc was successfully sent from SAP. Then we try to start again the adapter and it was loaded after sometime.
Iu2019m now out of idea on why does the idocs went missing. Can someone help me?
Thanks in advance.

Hi Parida,
IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
Run the Program RBDMOIND in SE38...
Changed on :<Date>
IDocs/Commit Work :100
Display IDoc not sent- Check the Check Box.
Now you will get list of un posted IDocs
Ramesh

"An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

Hi all,
While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
Only a particular Idoc type is having this issue.
Below are the checks done before posting this query:
1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
2. Reloaded the meta data in PI for the particular Idoc type in issue.
3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
5. Restarted the inboundRA service in PI AEX.
Is there anything still missing. What could be root cause of this issue.
If anyone has encountered it before, pleases share the resolution.
Thank you
Younus

Hi Amit,
Thanks for the reply. Log viewer doesn't provide much help on the error.
The error desc says
"JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
regards,
Younus

Send files from SAP ECC5.0 to websphere MQ

Hi
What I need or use (ABAP) for sending files from SAP ECC5.0 to Websphere MQ. I've been reading post but mention PI/XI .
Thanks in advance

The Question is not so clear on how you are intergrating between SAP and Websphere.
But just incase if you are using WebSphere MQ Integrator(WMQI) SAP IDOC solutions are preferred.You can probably send idocs from SAP.

HT4436 Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

It's happening because you are using the same Apple ID for iMessage. You don't need to do anything with your iCloud account to fix this. You should create a separate Apple ID for her device to use with iMessage and FaceTime. (You can continue to share the same ID for purchasing from the iTunes and App stores if you wish; it doesn't need to be the same as the ID you use for other services.) Once you've done this, on her device go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with the new ID. Do the same thing in Settings>FaceTime.
Another caution is that if you share and iCloud account with her, any data you both sync with the account such as contacts, will be merged and the merged data will appear on both devices. If you don't want to end up with each other's contacts, calendars, etc. on your devices, you should have separate iCloud accounts to. If you want to make this change, go to Settings>iCloud on her device and tap Delete Account. (This only deletes the account from the device, not from iCloud.) When prompted about what to do with the iCloud data be sure to choose Keep On My iPod. Then set up a new iCloud account with her new ID, turn on iCloud data syncing again, and when prompted choose Merge.

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Similar Messages

Maybe you are looking for