Message start but never finish
Hi guys,
I have installed PI 7.0 was 5 months ago, that always running without problem, but today have occured one error.
Error:
When the PI send a xml for receiver agrement (comunication channel) the message stay always executing and never stop.
In SMQ2 tcode, the message are executing for hours, hours, hours and not stop.
The message appears em sxmb_moni (abap) but not appears in rwb (java)
Can anybody help me, please ?
Hi Joao,
If this is the case you dont need to worry. This is your java function problem . There is some condition in your java function that is never satisfied and goes into infinite loop. Plz check that condition or make sure that this condition is satisfied.
If you want you can check by removing the Java function and then checking in smq1/smq2 there wont be any entries in running status.
Hope this solves your problem.
Thanks!
Similar Messages
-
When I download the process starts but never finishes the download
Downloads start but never complete. I have an Intel with 10.6.8 operating system
Disable your firewall/security software and try again.
-
I have a mac. Firefox prompts me to download updates, but when I authorize the download it looks as though it's starting, but never gets underway or finishes. How do I address this problem?
Try the alternate and easiest way by downloading
* getfirefox.com -
I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help
I will try, and what happen is that after it is intall and start "Preparing upgrade" the installation stop and a message occure: An error occure download the iOS 5.1.1" thas all.
But now it is too late because the iOS 6 is now availabel, is it recommendet to donwload iOS 6 on iPhone 4 or not? -
Hello
When I try to load the Pas Model by entry & approval, appears the follow message : "load started but not finished. Check contents of wfmde_update_bica01devpbi.trc file".
When I check this file, in the end appears the follow:
FROM CPMS_EA_DETAIL, CPMS_EA_DATA
WHERE CPMS_EA_DETAIL.ID = CPMS_EA_DATA.CPMS_EA_DETAIL_ID
AND SUBSTR(DIM0_MEMBER, LENGTH(DIM0_MEMBER)-2, 3) LIKE 'ACT'
AND CPMS_EA_MASTER_ID = 109423193977918
AND INUSE = 1
AND READY = 1
end
LSLink> lss create TIME = substr(PERIOD,1,4) + '/' + substr(PERIOD,5,2) + '/' + substr(PERIOD,7,2)
LSLink> read
DAT046:
The Dimension NODIM Must Appear in the ACROSS/DOWN List
I don't understand what is wrong, because everything works fine, and nothing change with this dimension.
Regards
AndreiaHello Andreia,
I think you have also opened a customer message for this as I seem to recollect seeing it.
My guess here is that, since the metric set was created, the measure definition was changed so that, in addition to being defined by the dimensions in the metric set, is also defined by something called NODIM. That's the usual way in which an error like this occurs.
Thanks,
Robert -
I hit the "update all" button in the app store and things seemed to get started but never completed. Now all these apps have a "waiting" msg under them. How do I fix this? Thx-Kurt.
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
When trying to "e-mail link" gmail starts to load but never finishes.
when I try to send a link Gmail starts to load and then gmail never finishes loading. I leaves the gmail loading box up with the blue line about 80% full and then it just stops. It does this on 2 pc's and one laptop that I use.
5Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Fetching but never finishing while trying to rebuild
have tried to tried to rebuild my mailbox (mailbox was getting populated with multiple duplicate emails), but now, as I run "activity" it's fetching my mail--some 14000 messages, but it's getting hung up around half way through.
and then just starting over.
consequently, there are now NO emails in my inbox. help! how do I make sure the emails I'm trying to recover aren;t lost?
and why the incessant loop of fetching, never finishing, and then repeating the cycle?
mail-less in DallasAudrey:
Welcome to the Apple Discussions. You can useiPhoto Library Manager to easily open both of the two libraries on your HD to see if there is duplication or if there are some photos that are not in your primary (located in the Pictures folder) library. If there are some you need to get into the primary library the paid version of iPLM will let you copy rolls or albums between the two libraries and maintain the keywords and comments as shown here.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Backup exchange 2010 done, unloading medium... but never finish
Hi all,
I'm using Data Protector 07.00 to backup exchange 2010 (with DAG), everything was fine but then exchange full backup has done DP unloading medium then never finish, other jobs will be backed up normal except the exchange will be failed on next start. I can't also abort/cancel the device after the DP unloading medium.
please help me to solve.
thanks,Hi,
Apologies for digging up this relatively old post but I am getting the same error message as the OP, however the solution is irrelevant / doesn't work and I can't fathom it out.
We have six Help Desk operatives - members of "Help Desk" and "View Only" RBAC. All Help Desk operatives connect to a terminal server (2008 R2) where EMC and EMS is
installed. The EMC works fine for all HD operatives, apart from one. When this operator clicks on anything under "Recipient Configuration" he gets the error described herein. It was fuly working until around early January 2014.
We don't see any event log errors on the Terminal Server or on Exchange 2010 pertaining to this fault.
Although he connectes to a terminal server, it is a one-off used for Exchange management only. It only uses local profiles. I have completely wiped his profile and seen the system build a new
profile for him. As a test,
I added him to "Organisation Management" RBAC group and the issue went away - he was able to enumerate all users, when removed from "Organisation Management" and the problem returns.
When clicking on Recipient Configuration --> Mailbox, I see the PS cmdlet run is:
Get-Recipient -PropertySet ConsoleLargeSet -ResultSize '1000' -SortBy DisplayName -RecipientType 'UserMailbox'
He can connect to EMS and run this cmdlet without issue.
I am at a loss as to where to go from here. Every Google results in checking the paths mentioned in KB2027063 (which are correct) or installing / reinstalling WinRM Extensions for IIS, which
are fine, otherwise the issue would affect all users.
Any help would be gratefully received
Many thanks
W. -
Trying to download foxfire on a Mac. It begins but goes for hours and never finishes.
You may need to consult a Safari forum for your download problems.
Possibly consider as a work around downloading from another device and transferring on removable media or by wifi/bluetooth etc to your Mac. (Take care to obtain the correct Firefox installer, the one for a Mac and not the one for the downloading device).
The Firefox related advice on downloads is:
*[[Find and manage downloaded files]]
*[[What to do if you can't download or save files]] -
MY iBooks are not properly synching with my iPad. Many of the books are stuck in a "downloading" status. But they never finish and are not added to my library. I have tried resetting the iPad and it is running the latest release of iOS.
Thank you!
JohnHi Just Sign out of itunes then sign back in Also Settings itunes & apps store, make sure automatic downloads, are on. Cheers Brian
-
Trying to add my new Macbook Air to iTunes match. Process starts but goes nowhere. After some time I get error about iTunes server losing connection. Help! I want to access all my music.
Hi Rob- I'm guessing it has something to do with all the update stuff Apple keeps doing (with Yosemite, etc.,) extremely frustrating - also whenever I load up iTunes on any of my devices- I am asked to enter my passcode- which I will do- then I am asked to do it 2 or 3 more times - right after the other- crazy how annoying something like that can be- I have looked online for solutions- i.e. close out of the account, reset the passcode- all of it- nothing seems to fix that situation either- what I have discovered (playing around) is on my iPhone 6+ if I go to settings and turn OFF iTunes match- then turn it back ON- suddenly all the music that wasn't loaded shows up magically- but I had to do that each time I'd update songs in my playlist on the iMac- then go to the iPhone and turn off the match- then turn it back on- almost like it is resetting things-
-
I have some pictures that were downloaded from some emails. I was on AOL thru Firefox, when there was an upgrade. Allowed the upgrade & restarted. When I went back thru Firefox onto Yahoo.com to my mail site and then opened pictures it started going to somewhere that starts with: http://us.mc1801.mail.yahoo.com/mc/welcome?.partner
It just keeps circling a green arrow like it is trying to load but nothing happens. I have tried several restarts and it does the same thing. As I type this the green arrow is still working. Do I need to call AOL support or what? Thanks Alicehello cornea1, try to disable "encrypted connection scanning" within kaspersky's settings > additional > network.
-
Recently my i-photo '09 starts importing photos but won't fihish. Sometimes I can make it work by restartig (after force quitting i-photo), but the problem seems to be worsening. I'm using a Kodak M-532 camera, and can import with no problem to the computer of a friend who has a MacBook with the same operating system and same version of i-photo. I've also tried repairing permissions before restarting with no luck. Suggestions?
You're on 10.6? There's a long-standing issue with Kodaks and 10.6.8. Some folks have fixed it by reformatting the card with the camera. Others by using a USB Card Reader.
Regards
TD -
this has happened at least 4-5 times. i have always in the past been able to update with no issues
about:crashes only lists crashes that you have reported using the [[Mozilla Crash Reporter]] which comes up after a crash. Because there are so many possible reasons for a crash, getting the crash ID really helps volunteers find the cause quicker.
That doesn't mean we can't help without a crash id. :-) No crashes here, but I'm also on Snow Leopard and using Firefox 3.6.6.
Are you using Firefox 3.6.6? The most common cause of crashes on Mac is the Flash plugin. Are you using the latest version of Flash? You can check at http://www.mozilla.com/en-US/plugincheck/
Do you remember any specific circumstances about when the crash occurred? What sites you were on?
Maybe you are looking for
-
Are There Any Good Windows Store Apps For Managing AD Users?
I'm thinking of buying the $79 HP Stream 7 tablets (1GB RAM 16GB storage) and using them as pocket computers to manage AD users while walking about. We could simply run Remote Desktop to access our workstations and use RSAT tools, but it would be nic
-
I want to know how to send and HTML page generated by a servlet into a specific frame of the client browser.
-
Oracle deleting rows from tables starting with the name PQ
hai friends we are given access rights to delete only tables starting with PQ. HAVING PQ_NUM as primary key for all the PQ tables. totally we have 6 tables. PQ_01,PQ_02, PQ_03,PQ_04,PQ_05,PQ_06. ALL This tables will have one primary key. for example
-
Lately, whenever I "open a link in a new window", when that window opens it immediately minimizes down to the task bar. This is obviously annoying.
-
Image URL from publishing Image Site column ?
Hi techies, I have created one column say PublishingImage of PublishingImage Type and added it in custom list. Used this column to upload image. But not able to fetch its URL. Used the below line to fetch the Url: SPFieldUrlValue oUrl = new SPFieldUr