Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Similar Messages

Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.

Hi Experts,
All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
Could anyone please help me how to fix this issue.
Thanks in advance,
GRK

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Message sending/ receiving problems and contact status issues.

Been using the Skype on my Samsung Galaxy S4 (GT-I9505) with Droid 4.4.2 for several months now without any issues, however in the last few days it's been plagued with problems (It has recently had an update, 5.8.0.13549). While on mobile data it will often outright refuse to send or receive messages or calls, other apps and internet all work fine and it shows me as connected. While on mobile data and on wifi it doesn't display contacts status correctly, with some online people being offline, some offline people being online and people who are away being either online or offline. I have tried clearing the app data and also tried to reinstall the app, it had the same issues after both. Nothing else on my phone has changed. Any advice would be appreciated.

I'm also having the same problem as you. I'm using a galaxy S5 phone. Didn't do anything but since the last update I've been experiencing the same problems as yours.. Have you fixed it at all?How do you downgrade or revert back to the old version, where everything seems to be working well/

Function Module / Method to Get Status of PO and Invoice status (Archived)

Hi Experts,
I have a requirement where I have to process mass collection of SO, PO and Invoices for certain output triggers based on user input in a Z program. However the requirement states that I need to skip processing for the documents which are archived. I got a method (CALL METHOD cl_sd_archived_sales_documents=>check_sales_doc_archived on ECC 6.4 system) to get Archived status of Sales Order, but could not find anything suitable for getting the same for a PO or Invoice documents. Whatever function module I am getting, requires an input called Archive Key or handle.
But I will be only having the document number (like a purchase order number or a invoice number). Is there any inbuilt FM or Method in SAP which will let me determine if the document is already archived or not?
Thanks for your time,
Anid

The function module looked promising, but it returns some weired error when I execute. I will check with Basis team, as I tried with multiple PO which are archived (and can not be viewed on ME23n)
Error ID I got is:
Exception NOT_FOUND
Message ID: CMS Message number: 025

Incentive Compensation Calculation Status is Unprocced and Batch Status Fai

Hi..
I am getting massage while calculating compensation batch like Process completed with errors.
Please Suggest me the the suitable solution for this.
Also getting Error While Loading the Transaction As :There is no transaction in the Transaction Interface Table to load based on the parameters provided. Please check the parameters and the loading status of the transactions.
Pls Suggest me
Regards
Sachin
Edited by: 903921 on Jan 1, 2012 1:36 AM

Hi..
I am getting massage while calculating compensation batch like Process completed with errors.
Please Suggest me the the suitable solution for this.
Also getting Error While Loading the Transaction As :There is no transaction in the Transaction Interface Table to load based on the parameters provided. Please check the parameters and the loading status of the transactions.
Pls Suggest me
Regards
Sachin
Edited by: 903921 on Jan 1, 2012 1:36 AM

Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Tidal Enterprise Scheduler - Get Job status using c#

Is it possible to get the list of jobs scheduled and their status in Tidal Enterprise scheduler using a programming language like C# ?

API depends on your version and you need to have the client installed from Server/DEsktop initiating the API
the PDF document should have been included on you CD2 called Command Line Program Guide
I will use 5.3.1 as an example:
open a command prompt
Browse to C:\Program Files (x86)\TIDAL\Scheduler\client
type in set alias=DEV > example=DEV otherwise it defaults to Admiral
type in SACMD
type HOST I always type in HOST so I can verify what master I am running against (nio need if only one connection)
type in jobmon with your options I included below from doc
[-d date] +display_options [filtering_options] [-b]
It may be of limited use in 5.3.1 because to isolate you need to know Job ID or Alias or some other filter critiera... Job ID is in database jobmst.dbo.jobmst_id which is the unique identified and can be different from alias... depending on your requirements (dashboard?) and how you have organized your jobs a SQL query would be the better option.
DISPLAY
r
Job rule ID
i
Job run ID
p
Parent job group ID
j
Job type (job or job group)
c
Occurrence number
o
Job or job group owner
u
Runtime user
h
Agent The Agent the job runs on
z
Scheduled vs. unscheduled job
t
Job start time
s
Job status
v
Job duration
n
Job name
a
Job alias
q
Queue
x
Exit code
FILTER
-r
rule_id Job rule ID
-p
group_id Parent job group ID
-j
type Job type. You can choose: job group: group, or 1 job: Job, or 2
-o
owner Job or job group owner
-u
run_user Runtime user
-h
agent The Agent name the job runs on
-s
job Status ( Completed Abnormally=103, Normal=101)
-a
alias Job alias
-x
exit_code Exit code
-b
Suppresses the header information

Exact Difference between Total Status And QM Status

Hello All,
I want to know Exact Difference between Total Status in Monitor And QM Status in Data Target.when these two are going to be changed manually. i am facing a Problem.
daily delta upload is going on from R3 to BW.Today it has given a problem while loading data. please give me u r ideas on this. how this delta should be Success.By changing which status ( Total, QM status) i need to chage for deleting the failure Request , to load delta again.
thanks in advance.
Eswar

The global monitor queue time can be set in transaction RSCUSTV2. This is the time that the system allows to elapse before it sets a request to 'Terminated'. If the time of the last received message that logged a processing step on the monitor for this request has taken longer than the monitor queue time, the traffic light in the monitor is set to red.
If the monitor traffic light was set to red due to the queue time, this does not necessarily mean that the request can no longer be successful.
If the data is very delayed by the time it reaches BW (because the source system needs a long time for the extraction or because the link between the source system and BW was interrupted) or if the processing in BW needs a very long time in which the processing step does not log any messages on the monitor, the monitor traffic light becomes red and jumps back to yellow as soon as a new log for this request reaches the monitor. If you manually set the QM status in the monitor, this also does NOT prevent the updating of data for this request in BW! However, then the request can no longer turn green, since the manually set QM status always overrides the technical status of the monitor.
Bye,
Roberto

Service tickets - User and system status

Hi guys
This is the scenario, there was a complaint raised by our resolver groups saying that they were unable to open any service tickets logged through to them from our Contact Centre Agents. All this happened in a space of 5 hours only
Under the Header Overview of these service tickets, when I view the changes to this document, i saw that every service ticket that was logged user status shows CLOSED and system status shows COMPLETED
Please advise what could have caused this?
Ravi

Hi Arden
Went through a few of those cases and picked up this
The last system status entered shows TO BE DISTRIBUTED - by the Interaction Agent user
Responsible Group deleted - and new value shows the new responsible group
But the time frame bewteen the old value and new value is what concerns me. Theres a gap of about 45 minutes on average from the time the case is logged "open" till the time the case is "in process" by the resolver
But as per the resolver groups, they could not access these cases once they were logged. So it seems these cases were all "locked" basically and could only be access minutes later
Ravi

Inbound Idocs: Queue Processing (non-stop queue?)

Hi everyone!
I have an issue with a File to Idoc interface. The customer would want the IDocs arriving to R3 to be in the same order they were sent from the legacy. From the File Adapter there isn't any problem using the EOIO QoS, and in the IDoc Receiver Adapter I checked the "Queue Processing".
There is something in the R3 side that the customer doesn't like much and it's about the stop of queue when an IDoc gets in error status: all the subsequent IDocs stay in status 75 ("IDoc received via qRFC").
I can change the status of the wrong IDoc and then release the stopped queue but: Is there a way to process serialized inbound IDocs avoiding the stop of the queue if an error occurs?
I'm using PI 7.0 SP30.
Thank you in advance!

First, this is not serialization, it's the queuing design EOIO... they are not the same.
So, since you activated EOIO in the Sender CC it's normal to have such behave (i.e. 75 status)...
Basically the serialization is not a good fit for these requirements.
Here is one solution:
1- Use dynamic queue name (via UDF) to create more parallelism since I dont think you have to queue all the IDOCs in one single queue.
2- Copy the IDOCs with 75 status to a new IDOCS with 64 (You must have very few)
3- Use RC1_IDOC_SET_STATUS to change the status of the IDOCS from 75 to something 73
4- There is standard report that you have to schedule and restart the queues
5- Reprocess the IDOCs from steps 2
The enemy of EOIO design is the user locks in the target system...
Cheers,
Fouad

SM37 - Scheduled and Released.

Hi All,
In SM37 (Simple Job Selection Screen) what is the difference between Scheduled and Released status??
Regards.

Hi Kumar,
Scheduled -> means the job has been triggered
check this link ...
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/content.htm
Hope this helps,
Sudhakar.

Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
Mrudula

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Message scheduled in SXMB_MONI(Queue status is stoped)

Hi experts,
Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(this is not in XI). scheduled messages are not at all executing.. here i registered all queues.
Please give me the solution how to reprocess the messages.
thanks
Srinivas

hi ,
1) Here i am selected message processing mode EOIO. which one is good EO or EOIO for process the messages asynchronously. If i choose EOIO I have to give queue name right? What name i have to give?
It depends on the requirement.
if your messages are related with the one another . means 2nd message will only process when 1st one is successfull.
Then use EOIO.
and no dependency is there then use EO.
Naming convention is given is SAP library for sapxi.
For EOIO use like :- XBQO*
For EO use like :- XBTO*
2) how to process again this messsages in receiver system. (I am doing using SMQ2 but this metthod is not for production system).
Now if duplicate entries are there then delete all those messages first. and if it is going in Database then Delete the wrong and duplicate entries in the Tabel first.
Then restart the right messages. Goto SXMB_MONI then delete the duplicate messages.
Regards,
Sumit Gupta
Edited by: sumit gupta on Nov 12, 2009 1:30 PM
Edited by: sumit gupta on Nov 12, 2009 1:31 PM

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Similar Messages

Maybe you are looking for