Message status does not change from in-transit [SAP Exchange Connector]

We have a Exchange Server 2003  and SXC 2.05. and we are on R/3 4.6C.
Using the SXC we can send e-mail from SAP to any internet address. But in sap we only have the following status:
"Message transferred by node to communication system".
If the message was sent correct or not by the Exchange Server, the SAP can not obtain this status. And currently the messages are being lost. s
Anyone had gone through this problem ? Any tips will be very useful.
Regards
Ballie

we are using the SMTP node
these are the messages for the documents send.
1. Document sent 
2. Wait for communications service 
3. Message transferred to node 
4. Document deleted from queue 
but they still remain in 'in-transit' state, and it is not possible to detemine why the mails are being lost
if you can help on getting a detaield trace of the mesages on the connector and excahnge end.

Similar Messages

  • Log version status does not change

    Hi,
    For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all.  Can you please let me know the reason for this and how the message status can be changed to successful.
    Thanks
    Sreenivas

    HI,
    This already explained in above note please do accordingly..
    See below..
    Symptom
    Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
    Other terms
    Delete, synchronous messages, message status
    Reason and Prerequisites
    You use the SAP NetWeaver Exchange Infrastructure.
    Solution
    Implement the attached correction instructions or import the Support Package listed below.
    See the note.. for more details..
    Note 930181 - Deletion of synchronous messages with message status 001.
    Also see the note
    Note 820149 - Deletion of manually changed and terminated messages
    Also see the below threads
    sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
    SXMB_MONI: LogVersion
    Points rewarded if it is useful....
    Regards
    Chilla..

  • IDoc does not change from state 30 to 03

    Hello,
    I am trying to send out an IDoc via tRFC Port. The IDoc in some cases is transferred successfully trough the port. In some cases it stays in state 30 on sender side. I tried to post-process the IDoc via transaction BD87 and via report RSEOUT00. Nevertheless the IDoc stays in state 30. I do not receive an error message. The only message that is displayed by a popup window tells that 1 IDoc has been selected.
    Btw, I am using IDocs of version 3.0/3.1. The sending system is ECC6.0.
    Can anyone help me? Thanks a lot in advance!

    Hi Ron,
    just to add to what was already said, please not that when sending idoc in queue mode from ECC, if the idoc is generated from WE19 it will always be stuck in WEOUTQUEUE Until you will activate it there and release it.
    Note that for EOIO Idoc stuck in the inbound queue of ECC instead you have WEINBQUEUE.
    Additionally note that status 03 is a temporary status that does not mean that the idoc was delivered to the target system but only passed to the port.
    The final status is 12, you can get it scheduling the report RBDMOIND that updates the status.
    Regards,
    Sergio

  • Wait for Session Data status does not change in EWA

    The hour glass next to the early watch alert in the solution manager system has the status "wait for session data". The SDCCN in the satellite system has the RFC configured correctly and the RFC is working fine when tested. I have installed the latest ST-PI and ST-A/PI for my basis release 640 on the satellite system. The basis release of the solution manager is 701. The self diagnosis button in solution manager does not list any errors or warnings for that satellite system.
    There are no errors in the task Refresh Session task in the satellite system's SDCCN:
    Refresh of session overview started from destination SM_R3SCLNT001_BACK
    > Sessions are up to date
    Refresh of session overview completed from destination SM_R3SCLNT001_BACK
    Any ideas why I can't generate the EWA in the solution manager system?

    Hello, I've got the same problem, went through the note, but it didn't solve my problem.
    Here I can say, that several points from the note are NOT clear (typically SAP...):
    I am falling in the category with ST-PI ... or newer.
    - SDCCN:
    Delete any task 'Maintenance Package' in the 'To do' tab.
    Ensure that no connection to SAP is maintained in:
    SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
    <so I deleted all the RFCs in that location>
    Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
    <surprisingly, now there is a connection that has to be maintained!! Also the 'master' flag is always grayed out for me and never clickable!!>
    Create a new periodic task 'Maintenance Package'.
    <Not working, until I added back my SM_<SID>CLNT<No>_BACK connection>
    - Step 2:
    Re-import the service definitions, c)
    They are saying how to setup the destinations, but NOT how to import the service definitions!
    So, not really sure how to interpret and apply the note... Please help! The satellite system is NetWeaver 7.3 EHP1, Solution Manager 7.1 SPS10.
    It goes on... I found this link:
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CDMQFjAB&url=http%3A%2F%2Fwiki.scn.sa…
    With it, I could transfer the data to the solution manager, but I can only see 'Data is available', when I click it and tell it to start the job, SM:EXEC SERVICES 000000000400100 runs for 6-7 seconds and completes successfully, though the EWA report still says 'Data is available', but no report is being generated. I also re-executed the job SM:EXEC SERVICES and still nothing.

  • Status does not refresh from "Started" to "Completed" into Cornerstone LMS

    Hello,
    The SCORM files (SCORM 1.2) I have produced with Captivate 8 do not refersh automatically in Cornerstone.
    Actually, the status remain to "Started" even if the online course is completed. The user is obliged to do "Ctrl" + "R" to get the status updated to "Completed".
    I have submitted the case to Cornerstone and what is strange is that it appears that it works correctly with other authoring tools.
    Does anybody experienced that?
    Is ther any workaround?
    Thanks
    Fabrice

    Have you test the same package on scormcloud?

  • How do I set the size of the font so that it does not change from site to site or page to page?

    The font size happens when I visit a new site or move from page to page in any given site. I want to have the same size font at all times with out having to manually change it all the time.

    If you need to adjust the font size on websites then look at:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Read Status does not apply correctly when working out of a shared mailbox.

    since updating to the Exchange 2010 SP3 RU4, users have been experiencing the same issues when working out of shared mailboxes. when user 1 opens an email or manually marks the email as read the status does not change from their perspective, the email remains
    unread. however, the other users viewing the shared mailbox immediately see the status change to read. User 1 has to re-sort his email from catagory to received or from ect. As soon as the emails are resorted the status changes. alternatively, if User 1 views
    another folder and returns back. the email is marked as read.
    This problem happens with Outlook 2007 and 2010
    This happens after re-creating the profile
    opening outlook with the switches /cleanprofile /cleanviews seems to solve the problem for an hour or so.
    I have run mailbox repairs on the server for the mailboxes in question.
    changing the behaviour in tools>options>reading pane> has no effect.

    Hi Brenn,
    To narrow down the issue, we need more investigation:
    1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
    2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
    3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
    4.Please switch to online mode for shared mailbox and test the issue.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • STMS problem ( import status - import runnig does not change)

    I have the same problem like this:
    While Transporting request in our production server the status of request from import running (truck sign) does not change.
    But the effect of the request is seen in the production but status does not change.
    see :Re: STMS problem ( import status - import runnig does not change)
    I did se14 as experts suggested, the history truck sign go away,seem work fine,
    but when new request need STMS to trans, the truck sign happened again,
    I need you help,thank you!

    thanks for all reply,
    the last two answers are the same,I think this is the right key,
    I'm a ABAPer actually,yesterday I asked our headquarters  basis to help,
    and I don't know what he did,now this problem is be solved,
    PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
    thanks again!

  • Import status- import running does not change during the mass import of TR

    Dear All,
    I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
    But the effect of the request is seen in the production system but the status does not change.
    I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
    I have restated the system but no use still the same.
    Thanks in Advance...
    Latha

    Import Running for a long time on ECC 6.0
    The background job RDDIMPDP is running on client 000 as well as the relevant client.
    Below is the TP System Log:
    WARNING: System CC6. Warning. 20090914042136 :
    WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
    Please check the system. Use transactions SM21, SM37, SM50.
    WARNING: (This warning is harmless if no further warnings follow.)
    As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
    Regards
    Vikas Nagar

  • Error Message : Object does not exist (status management)

    Hi Gurus,
    I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
    1. Order level,
    2. Notification,
    3. Task level validations.
    In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
    Now the issue is :
    Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
    and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
    Is anyone aware of this error message, any suggestions are highly appreciated.
    Thanks in advance.
    Shrikant
    Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

    Hi ,
    You have posted this question long back that is one and half year back nearly.
    You got an error message in IW52 stating Object does not exist ( status management ).
    Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

  • From time to time when I click a searched link the colr of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thankste

    From time to time when I click a searched link the color of visited links does not change. It works fine after I delete history and cookies. Can I fix that. I am using windows XP. Thanks

    Here's the error message I get.
    Note the TC is connected to my Airport Extreme via ethernet and my iMac is also connected to the AX via ethernet so it's not a wifi issue.
    I can see the TC in the finder so it's not 'gone' from the network either.
    Also note that just then the TM system pref pane was claiming a backup error, citing my 'network password' and still refusing to backup.  I waited 5 minutes and did some tidying of my office while I pondered this and then tried again and voila it worked ok.

  • I am unable to redeem my purchase of a Photoshop Elements 12 software license.  After entering the redemption code and clicking on the Redeem button, nothing happens.  No error message.  Screen does not change.

    I am unable to redeem my purchase of a Photoshop Elements 12 software license.  After entering the redemption code and clicking on the Redeem button, nothing happens.  No error message.  Screen does not change.

    try using a different browser, or contact support Contact Customer Care

  • BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

    Hi Gurus,
    I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
    File format is
    Doc type  Document No   Rev           File Name
    JPS          0021581PS,     X,       /in/PLM/JAPAN/Files/0021581PS.xls
    Please help me I need to upload the data.
    Thanks,
    Deepthi

    Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
    The config settings will tell you the status you may set in order to make your changes, if they are allowed.

  • When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

    When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
    I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
            Mockery context = new Mockery();
            final MessageListener messageListener = context.mock(MessageListener.class);
            final Latch latch = new LatchImpl();
            final String prefix = "test" + System.currentTimeMillis();
            context.checking(new Expectations() {
                    oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                    will(new CustomAction("release latch") {
                        @Override
                        public Object invoke(Invocation invocation) throws Throwable {
                            latch.unlatch();
                            return null;
            final Connection connection = createConnection(null, null);
            Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
            connection.start();
            Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
            Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
            final MessageConsumer consumer = session.createConsumer(wildcardTopic);
            consumer.setMessageListener(messageListener);
            MessageProducer producer = session.createProducer(null);
            producer.send(destination, session.createTextMessage("MSG1"));
            latch.await(5000);
            connection.close();
            Thread.sleep(5);
            context.assertIsSatisfied();

    Check where your MDB sends the [response] messages to.

  • I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear.

    I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear. The old Macbook Pro I was using used Snow Leopard. Now with the new it is a Lion. Toruble now when I click onto new message window I have the spinning icon which show it is trying to load. However it fails and Im left with having to Force Quit it. How can I resolve this problem

    Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

Maybe you are looking for