Message status for Contract

hi,
I want to change the message settings in Contract for "Fill in the Required entry fields". I want to change the settings from Error message to Warning messgae. Please advice where to do this in SPRO. Thanks in advance.
with Regards,
Saakithyan.

>
Saakithyan wrote:
> hi,
>
> I want to change the message settings in Contract for "Fill in the Required entry fields". I want to change the settings from Error message to Warning messgae. Please advice where to do this in SPRO. Thanks in advance.
>
> with Regards,
> Saakithyan.
First look up the error message number, then follow this path: Spro>MM>Purchasing>Environment Data>Define attributes of system message, click execute, then whatever the error message is, look up and change from E to W
Edited by: Afshad Irani on Apr 28, 2010 9:13 PM

Similar Messages

Message determination for contracts(Purchase)

Hi ,
I have to recieve the automatic email of contract to buyer , I have created a
condition table with
1)Doctype/Buyer code(Purch group)
2)Assigned table to acess seq
3) Assigned acess sequence to message type
4) Maintained message determination .
I had used transaction NACE and selected application type EV and maintained condition records for Message type with medium 5 and partner as OA .
Now when I create contract , I dont see the message type automatic in the contract and when entered manually , it gives me error saying partner not maintained .
Can anyone suggest me .
Thanks ,

First of all check your vendor has the OA partner function and then go to SPRO-MM-Purchiasng-Messages- output control- prtner role per message type- define partner role for outline agreement
here you have to define for OA partner function then only it will allow you.
. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470

Message status for user

Hi Everyone,
Could anyone let me know how the SOLMAN service desk can be configured so that the user who raises the message can view the status of the message from time to time. Is that they need to logon to SOLMAN in order to view this detail or is the any config or Tcode for the user to view these details from the satellite system itself?
Thank you
BR
Saravanan Ramasamy

Hi,
The configuration of the work centers is simple. Look for it in SPRO -> SAP Solution Manager -> Configuration -> Scenario specific settings -> Cross scenario settings -> Work center.
This is an explenation from the SPRO on what workcenters are:
"A work center is a user menu environment. The user can access alerts reports and documents, and perform authorized tasks, in a work center. A user can be assigned to several work centers, depending on his tasks.
You can call work centers in the Web Browser or from SAP GUI in the transaction SOLMAN_WORKCENTER (see. SAP note 314568)."
You may find more explenation and a SAPTutor (sim document) in http://service.sap.com/rkt -> SAP Solution Manager 7.0 -> Work centers for SAP Solution Manager.
There is also information on http://help.sap.com/ -> SAP Solution Manager.
Hope it was helpful
Adi

Messages in devivering status for long

Hi All,
I am in with a problem.I have an File XI RFC async scenario.While posting data to the RFC the message are kept on delivering status for very long .
If for this interface more than 5 files are kept all the othere messages are in to be delivered status which enlongens the queue.
Only 5 messages are getting delivered at a time as the number of RFC threads in XI Box is 5.
Please help me in this .
I had a thought that from XI side it was only a fire and forget type of scenario but is it possible that while delivering it waits for successfull compleation of the target systems application program.
Mudit Mehra

No not all but only a single interface is running slow.
Can you also explain on how to increase the parallet processes?
Mudit

Change status for 18 million messages in the Integration Engine

Hello there!
I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
Thanks a lot in advance.
Carlos

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

No message output has been created for contract

Hi,
For one contract, I have changed the item quantity from 2000 EA to 1920 EA. But no message output has been created.
please assist..
Rgds
Mohan

Hi,
If you want system to generate the new message output automatically when any changes made to contract then check following configuration is in place or not?
SPRO > MM > Purchasing > Messages > Output Control > Define Message Types for Outline Agreement > Fine-Tuned Control: Outline Purchase Agreement > Here maintain your message type of contract (for e.g. NEU) with operation "2" (i.e. Change)
And then make changes in Contract and check the message will get generated automatically.

Setting System Status for CRM Contract

Hi
I need urgent help for changing the system status in CRMD_ORDER, once the Contract is saved.
I tried to use the Function Module CRM_ORDER_MAINTAIN for setting the status. But this FM provides status change on user level.
Please guide me how to set the system status for this scenario.
Thanks in advance

Hi.
Try using CRM_ORDER_CHANGE_STATUS to change the system status.
Regards,
Timo.

Message status showing "WAIT TRANSMIT" for longer time!!!

Hi Gurus,
The message status is showing as WAIT TRANSMIT in Oracle B2B reports, after long time (after even 12 hrs, this is the ack message(MDN)).
I have bounced the Oracle B2B server, but the status is still the same? :-(
What may be cause for this?
Regards,
Vithal

Hi Krishna,
Still I can see the message in the WAIT_TRANSMIT state. I tried resubmitting the message, I am getting the below error.
Resubmision started for message IDC02C7B98121AA7DC460000001B715240
Message Id to resubmit : C02C7B98121AA7DC460000001B715240
getWireMessageID C02C7B98121AA7DC4AE000001B715270
Agreement Name : MITI
null
Sender :PG receiver :BTGS actionName :null docType :rsConfirmIncid
entReport_DT docRevision :1.0 direction :Outbound ConversationId
:BTGS@9395690D121AA7D6C4E00000C303E700
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(String.java:390)
at oracle.tip.adapter.b2b.data.ReSubmit.getMessageDetails(ReSubmit.java:
405)
at oracle.tip.adapter.b2b.data.ReSubmit.beginResubmission(ReSubmit.java:
730)
at oracle.tip.adapter.b2b.data.ReSubmit.main(ReSubmit.java:109)
All the values are retrived properly, but getting this error.
Regards,
Vithal

Customizing message status Icon for program exceptions

hi Techies,
I am looking for really interesting stuff w.r.t. status Icons. I see there are predefined status ICons that you can see in message monitoring (SXI_MONI). Specifically talking about error message status ICon we see red flag however there is one more option that is red flag with thunder storm on it which can be seen in the list of ICons - legend button)
I want to know how I can raise the program errors with this flag. any clue? Do we have to set the error code to may be "APPLICATION_PROGRAM_ERROR" to do this any idea experts?

Hi ,
Any news on this query?
Regards

Status Profile and User Status for Support Message

Hi All,
We need to customize Status Profile and User Status Specifc to customer requriments.
we need the following Status for Support Message:
Open
Accepted
Rejected
Fixed
Retest
Closed
Note:
1] Only the Message creator should be able Set staus Open and Closed
2] Message Processor should only set status Accepted, Rejected, Fixed and Retest
I have created the Status Profile in BS02.
Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
Thanks!
Regards,
Pradeep L

> 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
       Anand: Diffrent authorization key for different statues......not for message processor and creator
> 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
       Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
>     do i have to create a new Zrole and assign or is there any other way.
       Anand: Yes u need to create a Z role and include that authorization objects in that z role....
       so u might have to create 2 Zroles and then assign them to the persons concerned....
Inspire ppl by rewarding
Regards,
Anand...

SD:Status profile for contract

Dear Friends,
I want to configure the status profile for contract with two status crtd (created) and rel (Release).please tell me how to configure the status profile and what is the significance of transaction control.
Is it possible to display the status in the contract overview screen instead of going by Goto-Header-status menu and how ?please suggest.
thanks in advance
ravi k

08.05.09
use t.code bs02 and create your profile as required and assign the profile to the document type. With transaction control you can control further transaction for the particular status.
regards

My iphone 4s keeps overheating and will not let me go on any of my apps as well as send any messages. plus my contract isn't up for another 6 months, what can i do?

My iphone 4s keeps overheating and will not let me go on any of my apps as well as send any messages. plus my contract isn't up for another 6 months, what can i do?

RESOLVED!!! I logged on to my Straight Talk online account, and did a Tech Chat. They immediately gave me a direct phone number and a Reference PIN number and asked me to contact their iPhone specialty support. I called (of course the gentleman's accent was very difficult for me to understand, but managed with asking continually for clarity). He walked me through several tests, setting changes and had me get on my wifi to obtain the latest APN settings. None of his efforts worked ad it was obviously NOT my Straight Talk iPhone 5, 64GB CDMA (no SIM) - it was something with their setting on their end on my account. I was placed on hold a few times and he would come back on to have me try to get on Safari and even Google... after the 3rd on-hold, he returned and asked me to try to use my data again without the wifi turned on and BINGO it worked... I still do not have my wifi turned on and I'm still receiving texts from YESTERDAY too while I was away from wifi service. IF you come across this issue - please call Straight Talk and/or log on to your Straight Talk online account and talk to an online customer service representative and get their direct line phone number for iPhone support and have your Reference PIN number available. Good Luck

Applescript for Messages status

Hello,
I try change status for Message app
I use that script to set offline status:
tell application "Messages"
     set status to offline
end tell
and that work correct
but when I try to set status to available or any else:
tell application "Messages"
     set status to available
end tell
then I haven't any results
what wrong?

Brian Smith5 wrote:
where whatever is the name of the service you're sending messages over. Not every messaging service has a status option, so I'm not sure that setting a global status has any meaning.
Where can one find the name of the service?
To get the names of the services, I used the following:
tell application "Messages"
          get every service
end tell
That returned three services: "Default" and two strings of characters.
I then tried your script:
tell application "Messages"
          set status of service "whatever" to available
end tell
I replaced "whatever" with each of the three services returned by the first script.
All three returned this error:
     Messages got an error: Can’t set service "[name of the relevant service]" to available.

Message settings for Printing a Contract

Friends,
Please let me know the message settings in detail for printing a contract.
Thanks

This is same as PO..
Follow steps for contract just like PO setting..

When I try to go to my pintrest page I get this message: {"status": "404"}. What does this mean and how can I get to pintrest and stop using IE for that website

Pintrest appears to be the only website where I am getting the error message: {"status": "404"}. So far all other sites come up.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/how-clear-firefox-cache
*https://support.mozilla.org/kb/Deleting+cookies

Message status for Contract

Similar Messages

Maybe you are looking for