Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Similar Messages

ABAP program to Cancel messages in Scheduled/Recorded status?

Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
Mark

Messages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

BW Queue Status Stopped: SXMB_MONI

Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
Swetank

Hi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani.

Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Queue status is stopped

Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
Shwetha

Yes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek.

Messages stucked in moni with queue status as "RUNNING"

Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.

Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh

Message stuck in Adapter Engine queue with status "Delivering"

Hi All,
I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
Restart of server is not an option here. Is there are place I can delete the message from AE queue?
Thanks
Jaishankar

You can see the queues status (and number of stuck entries etc) through the link:
http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
There, you can maintain the queues.
There is also a link for the EOIO Sequence Monitor:
http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
There you can see the stuck messages and maintain these.
Make sure to handle the proper message IDs.
All of these are acessible through the Messaging System main page:
http://<host>:<port>/MessagingSystem/
Regards,
Henrique.

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

Queue Status is showing Stopped

Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
Manish

Still the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem

Queue Status in SMQ2 = RUNNING, but Stuck.

I have a queue that sometimes gets stuck in SMQ2 in status RUNNING (for no apparent reason).
If I activating the queue manually (as suggested in
http://help.sap.com/saphelp_nw04/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/frameset.htm)
usually solves the problem.
Therefore, this queue processes messages 24x7 and cannot get stuck for more than 5 minutes.
Question n1)Is there a way I can do this automatically (scheduling a JOB) (itu2019s a specific queue, that is only used for this single process)?
Question n2) Sometimes, after activating the queue again, the message continues in status RUNNING, and the only solution is to delete the message and activating the queue manually (when I do this, after processing every message in the queue, when new messages begin to arrive, the queue goes to status READY for a LONG time.) Does anyone knows whats going on?
obs.: The message is ALWAYS processed successfully, and there is no problem to process it 2 times. The only thing that cannot happen is STOP the process.
Thank you.
At.,
Bernardo Tavares Braga

1) I already registered all the queue through sxmb_adm - didn't change anything.
2) This queue is on SAP PI/XI, but the message goes to SAP ECC.
Since the process is executed, what I think happens is that the message updates SAP ECC, but somehow it doesn't give a return to SAP PI/XI.
So SAP PI/XI thinks its still executing.
Pinangshuk, the MONITOR QRFC_RESTART_ALLOWED is set to value 1(in the Integration Engine configuration - sxmb_admin)
Also, this enables the restart of stuck queues manually. Is there a way to do this automatically?

Queue status no send or waitupda in SMQ1

Hi,all:
Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
Regaards&Thanks!
zagory

hi Zagory,
which datasource are you using ? 0crm_sales* ?
have you activate it in BWA5 ?
take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
hope this helps.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
transfer'   > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
   these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
4.a)If required activate the datasource
    Go to transaction BWA5   > select the required datasource and
    activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
   Go to transaction RSA1   > modeling   > infosources   > select the
   infosource   > right mouse click on the selected
   infosource   > choose option replicate datasource
    Activate the infosource.
6. Go to the scheduler for the infosource   > select delta in the
    update >choose the option PSA only (in the Processing tab)
    > start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
   an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
   click on the Datasource and remove the flags in the column 'Hide
   Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
    the transaction BWA1 then change and save the datasource, and then
    activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
     0CRM_OPPT_ATTR, then stop the delta process in the BW
     system
2) In the CRM system, Make the entry in the table SMOXAFLD
   for the datasource with the Key
   as 0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

Message in status "scheduled for outbound processing"

Hi,
I was tring to perfom volume test. The scenario is XMLFILE --> XI --> IDOC(R/3). I reduced the polloing interval to 2secs and it went well for 15 min. Later I left it like that for an hour and found that all the messages are queued up scheduled for processing. I checked SMQ2 there were lot of messages. I deleted them all and then activated the queuse through SXMB_ADM ->Manage Queues transaction. In the QRFC Monitor I see the scheduler status as Inactive. I tried to make it active, it starts and becomes inactive again. Still I can see all the messages in SXMB_MONI. Are there any specific steps that we need to perform to clear the queues.
Thanks.
Srinivas Vaidyam

Hi,
it's normal for transaction SMQR to show the scheduler in status "Inactive" (it just happens not to be running at the
time you enter SMQR, a moment later you might have found it to be running).
Rather than just deleting all the queues you should have clicked on the queue name for a waiting message from SXMB_MONI (in the default SXMB_MONI display mode you need to scroll a bit to the right to the see which queue a message is in). Drill down on the next screen (double click the queue name etc.) to see a list of all queued messages including a brief description of why the first message got stuck. You can now either "retry" or "delete" the message. Then go back one screen and unlock the queue (open lock icon) if you find it not to be in the status running. Refresh the display to make sure that messages get processed.
Of course these steps do not need to be performed manually. There's an automatic retry mechanism and if that repeatedly fails the report RSXMB_RESTART_MESSAGES (which you will need to schedule) will try to resend the messages.
You should now cancel all messages belonging to this testrun in SXMB_MONI. Make sure that none of the queues are blocked and restart your test.
Regards,
Hans Christian

XML Messages in "Scheduled" status

Hi all,
The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restart the "Scheduled" message, there will be an entry in READY status at inbound queue and we have to unlock the queue. After that, the message will be processed successfully.
Here are my questions:
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Thanks in advance.

Donald,
Here are the answers to ur questions.
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
Some times the queues get stuck for various reasons. one msg will cause bottleneck for all other msgs behind it. there is no proper reason why this happens, however if it happens regularly then u will have to give it a thought.
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
Well, if the msgs r in the scheduled state then NO.
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Manual restart is not the best way to handle msgs bcause you might loose track/ some msgs might error out together causing issues. (that has happend to us). its tough to keep track if that is the case and if its critical from business point of view.
If it is going out of R/3 then may be you can configure jobs to push the data periodically.
Regards,
Pavan

XML Message is status scheduled on R/3 side

Hi All
While trying to send message via outbound ABAP proxy i am getting my XML message in status "scheduled (commit work follows)" on R/3 side ... My queues are also registered .. I tested the HTTP connection to XI server also and it seems fine .. wonder why still no messages are appearing on XI system ?
Please provide help ?
Thanks

To register queues;
TCODE SXMB_ADM -> Manage Queues -> Register the Queues.
you can also run the report RSXMB_REGISTER_QUEUES

Message Status "Scheduled", Queue Status "Queue Stopped"

Similar Messages

Maybe you are looking for