Message stopped processing and not log data

I have an instance of a synchronous scenario (HTTP to RFC) that just stopped this morning before the call adapter step. This scenario ran successfully yesterday and this afternoon. No changes have been made for weeks. The last step to execute in SXMB_MONI was technical routing. I've compared this with a working message and the step looks fine. Rather than a chequered flag next to the message it has a grey circle. When I hold the cursor over the circle the test 'LOG MESSAGE' appears.
I've checked the specific communications channel in 'Comms Channel Monitoring' in RTWB and I can't find the message. The message before and after this message are shown. I've checked the Message Monitoring in RTWB and I can see the Outbound message which has a status of to be delivered.
Obviously the Outbound message cam into XI but doesn't appear to make it as far as the RFC adapter. Is there anywhere else I should be looking to find out why this failed or what caused it not to reach the RFC adapter?

Shabarish,
Thanks but none of the nodes have an error. That is what I find strange. Usually I'll see some problem with mapping or the R/3 system is down but in this case nothing.
When I attempt to restart it via SXMB_MONI it says I can't restart a message of this type.I'm assuming I can't restart synchronous messages.

Similar Messages

The State System message file processing could not process

Hi
We have Windows server 2008R2 SCCM 2012 R2 CU3 SQL 2008 R2.
Every 15-19 minutes I got two errors in State messages ID6104 (The State System message file processing could not process file 'HI6DYYB8.SMX' and moved it to the corrupt directory. Review the statesys.log file for further details.), 6105 (The State System
message file processing processed one or more files that contained errors or invalid data. Review the statesys.log file for further details.). It started on Monday.
Also on server in statesys.log
SQL MESSAGE: spProcessStateReport - Record 1 failed processing with error -50010:
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
CMessageProcessor - Non-fatal error while processing HI6DYYB8.SMX
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
STATMSG: ID=6104 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_SYSTEM" SYS=server.fqdn SITE=MYSITE PID=3744 TID=9880 GMTDATE=ce feb 26 05:11:30.119 2015 ISTR0="HI6DYYB8.SMX" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
Thread "State Message Processing Thread #0" id:9880 was unable to process file "D:\SCCM_prog\inboxes\auth\statesys.box\process\HI6DYYB8.SMX", moving to corrupt directory.
SMS_STATE_SYSTEM 26.02.2015 07:11:30
9880 (0x2698)
total chucks loaded (0) SMS_STATE_SYSTEM
26.02.2015 07:11:30 9880 (0x2698)
What could cause this messages to appear?

That just indicates that a state message sent by a client was somehow corrupted. You can examine the .smx that was moved to the corrupt-box, but it's not unusual that it happens.
Torsten Meringer | http://www.mssccmfaq.de

How do you get iPhoto albums on to an external HD and not by date?

I really hope someone can help me with this.
I don't know if I am missing some really easy step, but I recently bought an external 100GB FireLite drive to back up all my photos and music. The problem is that when I drag the albums on to the hard drive an error message comes up after a while, this even happens if I try to drag one photo. However, if I drag the files in date format, i.e 2001, 2002, 2003 etc.. then the files are copied over. However, when I try and open these on the new drive, they come up in Preview not in iPhoto. I am wondering if anybody else has had these problems and if so, how did you manage to back up your photos on an external hard drive as the albums are shown in iPhoto and not in date format.
I'd be grateful for any advice.

Hi Saint tommy,
-when you drag Albums to the hard drive you are probably running into the problem of having images in the Album that have the same file name. This happens when your camera resets it's file numbering to 1 each time you clear the card. Make sure your camera uses continuos numbering. I am not sure why that would happen dragging one photo.
-when you drag the photos in date format, the images are still in separate folders as to date of creation, so you will not have the same problem because they are in separate folders.
-When you open them up on a separate drive, they will open up in Preview because you did not copy the Entire iPhoto Library folder. If you did copy the entire iPhoto Library folder you would have to tell iPhoto where this folder is so it can open it.
When you launch iPhoto holding down the Option key this is the window you will get.
Create a new library or choose a library to open
Choose to create a new library if that is what you want to do, or choose a library to open by clicking the "choose" button.
If you click the "create library" iPhoto will open with a brand new library for you to import images to. If you click "choose" then you will get this window.
Open library
Navigate to where the library is on your computer, highlight it, then clcik the "open" button.
Now the "how to for backing up the iPhoto Library folder"
Backing up your iPhoto Library
1. Burn the iPhoto Library folder in the Finder to a CD or DVD
This method will give you a burned iPhoto Library folder that can be copied back to your computer to replace a damaged library. You can also use this method to backup an old library when you want to create a new Library to use as your current library.
insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use a DVD and a SuperDrive-equipped Mac
The easiest way to burn an iPhoto Library folder in the Finder that is larger than 4.7 gig to fit on one DVD is to burn sections of the folder.
Drag the iPhoto Library folder to the desktop
Double click the folder to open it.
Drag each Year folder to the desktop.
You should be left with the iPhoto Library folder containing all the data files, and the Year folders.
Combine whatever year folders that amount closest to a DVD burn size on one DVD. Make sure that you have burned all the Year folders, then the iPhoto Library folder with all the data files.
If you ever need to use this backup, insert the DVDs into your computer and copy the folders to the desktop. Put all the Year folders back into the iPhoto Library folder. Then put the iPhoto Library folder back into the Pictures folder.
2. Copy the ENTIRE iPhoto Library to an external drive formated for a Mac. Do not use this as your only back up as the external can also go bad.
3. Copy the ENTIRE iPhoto Library to your iPod in disk mode
4.Creating your own CDs and DVDs for viewing in iPhoto
This method is a great way to back up Albums of older photos or even your entire library if it is small enough to fit on a DVD. This method will give you a library that will mount within iPhoto in the source column to be viewed. To import any images from this library they need to be dragged into your library in the source column.
If you just want to backup the images in your library:
1) Within iPhoto select the images, albums or rolls you want to backup. Go to Share>Export and export them to a newly created folder on the desktop. Follow the directions in the next link.
Creating a CD or DVD to be viewed in Windows or by a photo processing company
Now the "how to copy the iPhoto Library to an external and have iPhoto use that library."
Copy the ENTIRE iPhoto Library folder to a Mac formatted external drive.
Launch iPhoto while holding down the Option key.
At the prompt, choose to open another library.
Navigate to the library on the external and highlight it.
Hit the "open" button
iPhoto will open the library on the external and from now on will use this library to import images too. This will now be your working library. Make sure everything is working correctly and everything is fine in the library.
You can then delete the library on the internal if you wish.
Hope this helps!
Lori

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

Camera Roll - ordered by "Name" and not by "Date".

My Camera Roll had a problem yesterday and forced itself to be rebuilt. When it came back up I thought a bunch of new images and videos were deleted. I connected my iPhone 4 to Image Capture and found that all the images and videos are still on my phone. However, Camera Roll is now sorting by "Name" and not by "Date" -- Note: These are the columns that are listed in Image Capture.
Does anyone know how to get the Camera Roll to display images by "Date" again? Thanks for the help!

Odd yeah, from what I can see there is no way to specify the sort order on the iPhone. Is is possible that the date data became corrupted? Can you grab a screenshot from your computer showing the name / date columns?
Slightly off topic, but possibly a similar effect to what has happened in this case:
I know when you transfer files from one hard drive to another, and then try to sort by the "Date Added" attribute, the Date Added becomes the same for all files- the date they were copied to the second hard drive.

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, t

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, this is very annoying.
And today it won't even read my camera's sd card, and I try with 2 different ones. If I restart the computer, leaving the memory card in, then it reads it; but if I pull it out and push it back in it doesn't see it. Whath am I doing wrong, if anything?
Diane

Where/how are you trying to change the name? If it is in Finder (after you've downloaded the pics to your desktop), highlight the pic icon and press Return. the name field will change and you can type in your new name. Hit Return again. That should make it "stick". If you're trying to do it elsewhere, please post the steps that you've tried.
As for your card: do you eject it properly? Either drag icon to trash or hit the eject symbol in the sidebar?

HT3529 Why is my messages sending green and not blue

Why is my messages sending green and not blue

Green means the message was sent as an SMS/MMS.
Blue means the message was sent as an iMessage.
If sent as green, the recipient doesn't have an iPhone with iMessage enabled or if they do, they have turned iMessage off.

HT1725 I have downloaded a movie and the downlaod has reached the end it will give a message saying "processing " and then it will start all over again . My pain I have spent so much on Internet data bundles I can't afford to spend any more for just one

I have downloaded a movie I purchased form iTunes and every time I get to the end of the download I will see a message "processing " and before i know it , the download will start all over again . My pain is i have spent so much money on the Internet data bundle almost twice the cost of the movie ! i can't afford to keep repeating this process , pls any ideas on how to get me out of this mess !

can you stop the download completely? try to stop the download, delete the downloaded file and then re-downloading it. itunes should save your purchase so you won't have to pay every time you download.

I hit the purchase button in error and it started to download a book I did not want, I was logged into my account, I paused the download. How do I stop it and not get charged?

I hit the purchase button in error on a book I did not want, I was logged onto my account so the book started to download, I paused the download. How do I stop it altogether and not get charged?

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

Web Analytics reports and not showing data

Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
rani

Hi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

DSC not logging data

Hi all,
For some reason, my DSC has stopped logging data. I have a fairly simple setup (8 modbus servers) that are being read as I/O servers in the DSC. I have checked the "Log Data"option, and this was working for several months. Recently, I had to move to a different computer, and now nothing is being logged. The data are coming in correctly, the database seems to exist, but there's no new data being stored. I have tried creating a new database, and then going into "Project library: Properties" and poining it to the new database, but nothing seems to happen.
I'd welcome any suggestions.
thanks,
mike
Attachments:
OAlab_pH_control.lvproj ‏9 KB

Hi Matthew,
There is no error message. In fact, I can access the shared variables just fine. The historical data charts act like they should, but they have no data. I've looked in the folder where the database lives, and see that it has basically never been used... there are 5 files (sdb_lock, pid_cdih, stridm.cdin, nodetree.elog, nodetree.elog.ckpt0) but nothing else.
I also did locate the original computer and found the technical report.
At this point, I'm reasonably comfortable abandoning any previous historical data, so I wouldn't object to a solution that involved starting the database over. I'd like to be able to use the original project to specify all the variables because it was laborious to set them all up.
thanks for your help.
mike
Attachments:
ni_supportOLD.zip ‏311 KB

BPM chart (process cube) not displaying data from business indicators

SOA/BPM Gurus,
I need some pointers for the below problem.
I am trying to do a basic BPM tutorial of generating a chart out of business indicators. I am creating a custom dashboard in the BPM workspace for the Request Quote process. The problem is that after I create the chart definition in BPM workspace, the charts do not pull any data for the business indicators. Here are the high level steps that I have performed:
1. Created a Request Quote process with typical steps such as - 1. Submission of Quote by Sales Rep; 2. Business Practices approval; 3. Deal & Contract Terms approval; 4.Save Quote.
2. I created 3 business indicators - Revenue Dimension, Industry Dimension, discount
3. After deployment, submitted a few quote requests through to final SaveQuote step.
4. Added a script task just before the Save Quote step to initialize these indicators from the corresponding elements from quote.xsd
5. Using the Sales Rep user, created a custom page and created a Data Source (Bar graph) with series=Revenue Dimension, Group=Industry, Variable=discount (operation=avg). The data type is Activity & measurement Sampling.
Initially I thought that the cause for data not being shown up is that the business indicators are not being initialized at all. But then I debugged this by writing the business indicators to the file on the SaveQuote step; the file generated did print all the correct values for the business indicators proving that they are being initialized.
Also, just to check whether the graph is picking any data at-all, I changed the data source to Work load per process and work load per participant and checked whether it shows transactions being created for the RequestQuote; the gragh did show data.
I am not sure I am missing any step such as a setting,etc on weblogic or em
Regards,
Sudripta

Hi,
You should complete the instances to see the data for the "Activity & measurement Sampling" graphs.
Make sure you have completed instances.
thanks,
Murugesh

Nokia 6110 and downloading log data to PC

I want to access the phones log data from my PC. eg Menu-
>Log->Recent Calls->Dialled Numbers.
However I cannot work out how to do this using the Nokia PC Suite.
My carrier does not provide me with real time info about how much credit I have used each month. If I had access to this information then I would be able to calculate it.
Anyone got any ideas?
Regards
Dave A

Hey there,
There are several ways you can pull the music off your iPod and onto iTunes. There is a very direct method, which I personally prefer, but there are also numerous third party applications, which will help you accomplish the task as well. The link below provides step-by-step instructions for the direct method as well as a few third party applications if you choose to go that route instead.
Next time, make sure to try and backup your library somewhere where you will know it will be safe. Hope this helps.
Also, remember to authorize your new computer.
http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/
B-rock

Message stopped processing and not log data

Similar Messages

Maybe you are looking for