"Message storage memory not ready" error message

Ever since I got my Nokia 2320 (which for some unknown reason is not listed on this site) back in December, it ran slow when I turned it on and took a few minutes (up to five) to what I call "recall the messages and remember it could send messages." But lately the time it takes to recall the messaging is longer and longer. A couple days ago it took me 27 hours. This time, its been 30. I read on another site about a guy who had this same message on this same phone and it had been 3 days and the problem had still not corrected itself. I want to know what is happening, why, and how to fix it. I called my carrier customer service and have been on the phone with them on and off for about a month about it. They have NO CLUE what it is. HELP!

Clean out the messages and reset the 2320. Dial *#7780# 12345 restore factory settings, keep data.
http://www.forum.nokia.com/devices/2320_classic/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

"Drive not ready" error message; synching issue

Hi- this is my first posting!
I am having problems syncing my ipod and itunes. I keep getting the error message "Drive is not ready for use; its door may be open. Please check drive \Device\Harddisk1\DR3 (here it has been DR5, DR3 and DR21 at different times) and make sure that a disk is inserted and that the drive door is closed."
Of possible relevance-I am on a network computer and this message has occurred after 1. a computer upgrade and 2. the discovery of spyware on my computer, and 3. itunes and (attempted) ipod update. (The spyware issue has been fixed, but I wasn't involved in doing that.)
A final bit of info-I have tried to change the E: drive to a different letter, like Z: but that gave me the same message.
Any suggestions?
Thanks so so much!!!
Compaq Windows XP

My ipod was dead. It was trying to tell me that its little hard drive was worn out.

Drive Not Ready Error Message

Hello all,
Today I tried to sync my Ipod and I got an error message that said "Drive not ready". When I turned my ipod back on, it was wiped clean. Itunes was not seeing the ipod, then it was, and finally I was able to restore it. However, when it goes to sync up after being restored, it only gets up to about song 300 until I get this error message:
itunes.exe - Drive not ready
The drie is not ready for use; its door may be open. Please check drive \Device\Harddisk1\DR3 and make sure that a disk is inserted and that the drive door is closed.
Any suggestions?
Thanks!
Lisa

My ipod was dead. It was trying to tell me that its little hard drive was worn out.

"Printer not ready" error message.

I get a message" printer not ready" when printing to "Adobe PDF." Have changed many settings, without success. Occurs when printing from MS Outlook, Internet Explorer, and MS Word. Any way to make Adobe Acrobat print a file as a PDF?

Dear Abhigyan,
...still no luck... AcroTray is running according to Task Manager. I tried using the "Repair" option in the Add/Remove Programs control panel item. I still get a message "Printer not ready" or simply a null response from the computer when requesting a print to Adobe PDF.
Do I need to completely reinstall Adobe Acrobat Standard XI?
Thanks anyway...
[private information removed by moderator]

TS1436 memory not sufficient error message how can i get rid of it, i have plenty of space on my disc

i get a error message saying that i don't have sufficient memory to upload music from my own cd library? what is going on? how can I change this, i have like 2 Terabytes of space on my hard drive? can someonw help me resolve this issue?

Maybe if the exact error message was provided someone could offer a relevant solution.

Keep getting 'NOT READY' error message when trying to re-authorize my computer after a hard drive re

need help, very frustrated
can not get it to work
also having trouble with Reader, I get a message that the book can not be downloaded because it is already in my library but it does not appear and so I am unable to read it

also having trouble with Reader Do you mean with ADE (Adobe Digital Editions), or with an ereader device.
Might be worth double-checking your authorization.
If that doesn't help, post back with more detail.
~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

af:message sometimes does not show error message

Have a page that has a popup to show some information.
In page, used this to show error message that occured during save.
          <af:messages globalOnly="true" inline="true" inlineStyle="padding:10px;" id="m4"/>
In popup, used this to show error messages that occurred while performing some action.
          <af:messages globalOnly="true" inline="true" id="m2"/>
Whenever any error occurs while performing some action in page, error message is shown.
Then open the popup
Whenever any error occurs while performing some action in popup, error message is shown properly in popup
But after closing popup, not able to show any error message in page. In bean error message is added to FacesContext, but not shown in UI.
What would be the problem here?
JDev version: 11.1.1.6.0
Thanks,
Bhaskar Pola

Thanks Vinay for the link. However still facing the issue.
This method will be invoked from page.
    public void onDelete(ActionEvent actionEvent) {
        RowKeySet rksSelectedRows = table.getSelectedRowKeys();
        int count = rksSelectedRows.getSize();
        if(count == 0){
            FacesContext facesContext = FacesContext.getCurrentInstance();
            facesContext.addMessage(null,
                                    new FacesMessage(FacesMessage.SEVERITY_ERROR,"Atleast one row should be selected.",null));
            facesContext.renderResponse();
        } else {
           ADFUtils.showPopup(deletePopup);
This method will be invoked from popup withing same page.
    public void multipleSelListner(ActionEvent actionEvent) {
        List<String> list = (ArrayList<String>)ADFUtils.getPageFlowValue("selList");
        try {
            if(list != null && list.size() > 0){
                if(list.size() > 25){
                    error = true;
                    FacesContext facesContext = FacesContext.getCurrentInstance();
                    facesContext.addMessage(null, new FacesMessage(FacesMessage.SEVERITY_ERROR,
                                            "Maximum 25 items can be selected.", null));
      facesContext.renderResponse();
                    return;
        } catch (SQLException e) {
            System.err.println(e.getMessage());
            e.printStackTrace();
I have removed some extra code...
Looks like problem is with 2 af:message tags. When popup shown with error message second af:message within popup gets preference. Subsequent messages are pointed to that one.
May be related to unloading popup content from document. Not sure though.
Thanks,
Bhaskar

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

Iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?

iphoto not opening. error message sent to Apple automatically but no reaction so far. has anyone a similar problem?
All screen sabvers using Iphoto dossier stopped working and meade me aware of a problem with iphoto (from ilife 11).
I reinstalled ilife 11, but it was not successful.
Anyone got a good tip on this?
Thanks, Michael

I've been having the exact same problem. It started 4-5 days ago
This is the error message i've been getting:-
Process:         iPhoto [509]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.2.1 (9.2.1)
Build Info:      iPhotoProject-628000000000000~3
Code Type:       X86 (Native)
Parent Process: launchd [167]
Date/Time:       2011-11-16 21:55:44.487 +0530
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          186902 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      4A4FE4E1-35CB-46CA-962E-309E30C781D3
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xd1afeb com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 -   0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0xfae000 - 0x114effb com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x11ee000 - 0x11f0fff com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x11f6000 - 0x1205fff com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x1212000 - 0x123affb com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x124b000 - 0x1272ffb com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1287000 - 0x1291fff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8fea2000 - 0x8fed49c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 2 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.1f4, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS542525K9SA00, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5            "
help would be much appreciated.
Regards,
Thimayya

Message Format Not Supported - error message

If I receive an MMS message when connected to my Mercedes SAP module I receive a "Not text" SMS message on the car system. When I disconnect from the car I have a txt message stored on my SIM that looks as if it should redirect me to the Orange website to collect my MMS.
The problem is I have to copy the message to the phone memory to read it and when I try to read it I get the "Message Format Not Supported" error message.
Does anyone know how to correct this I don't want to loose any MMS received whilst driving!!
Message Edited by whitenemesis on 16-Mar-2008 02:10 PM

Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Handler not defined error message

Hello - I'm having difficulty with a custom handler I've
created. Everything works well in authoring mode, but as soon as I
try to create a projector and run it, I get a "Handler not defined"
error message. The handler is used to query an sqlite database.
Here's the code which sits in a linked cast movie script
on startmovie
set gDBInstance = new(xtra"sqlite")
on mDBQuery gSqlstring
gDBInstance.sqlite_open(the moviepath&"halloffame.db")
gQuery_fetch_data = gDBInstance.sqlite_fetch(gSqlstring)
gDBInstance.sqlite_close()
end
end startmovie
The handler is called from a frame script as below:
on enterframe
gSqlstring = "SELECT file_location FROM mediaitem NATURAL
JOIN category WHERE category = 'Equipment' ORDER BY mediaitem.name
ASC"
mDBQuery(gSqlstring)
end enterframe
I'm using Director 11 on Windows XP. I do have all of the
sqlite xtras in an xtras folder next to the executable. Any
thoughts on what I'm doing wrong??
THX!
Mike M

I ran a couple test that were interesting, but first I need
to address some bad coding practices.
miken75,
I see no reason to open and close a database with each query.
Open it at the beginning of the program and close it at the end.
You should always check for errors with every interaction
with a database, including opening it.
In your function "mDBQuery " you pass in a variable called
"gSqlstring" and assign the returned data from the query to
"gQuery_fetch_data". Neither one of these variables should be a
Global. The whole point of the function is to pass in a temporary
string and the function Returns query results. Do not use Globals
in this situation.
This is a bit nit-picky, but your function names should be
verbs - some sort of action. "mDBQuery " is a noun. Something like
queryDatabase, doQuery, fetchData, etc. would be better.
A basic re-write of your startup code would be:
global gDB
on prepareMovie
gDB = new(xtra"sqlite")
Okay = gDB.sqlite_open(the moviepath&"halloffame.db")
if Not Okay then
alert("There was an error opening the Database")
end if
end prepareMovie
on queryDB SqlString
return gDB.sqlite_fetch(SqlString)
end queryDB
on stopMovie
gDB.sqlite_close()
end stopMovie
Finally, "EnterFrame" is a really poor choice for an event
that queries a database. "EnterFrame" is used when you need to do
something many times a second, such as an animation. For a singular
event like querying a database I suggest "prepareMovie",
"startMovie", "beginSprite", "mouseDown", and "mouseUp".
I'm just trying to improve your coding practices. Better
code, means less bugs and going home early.
To your problem:
I tried a couple things. I placed some startup code and a
function in an internal cast movie script and an "enterframe"
behavior that calls the function in an external cast. I saved and
published, and the executable comes up and gives the handler not
defined error. This error is a Director thing. It has nothing to do
with your code.
If, however, you shut Director down and run the executable,
then there is no error. This fact implies that when you try to run
Director and the executable at the same time, then Director all
ready has ownership of the external cast file and the executable
therefore can not open it. Although, generally under that kind of
circumstance you get an error message indicating that the file is
in use by a different program. So, I don't know exactly what is
happening here.
I then moved the "startup" code into the external cast with
the "enterframe" script and published. No error. Director and the
executable run side by side just fine. Weird.
Hope that helps.
Randal.

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

"Firefox is already running but is not responding" error message and recent firefox update

"Firefox is already running but is not responding" error message is continuously popping up after the recent firefox update. I have nearly exhausted every possible solution to the problem as seen from the support page for this error message. I know someone who has the same issue on their computer and it also started right after the recent big update. Does the update have anything to do with this reoccurring issue? Is anyone else having this problem? Any other ideas on how to fix it? It would be great to get some help.

From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

"Message storage memory not ready" error message

Similar Messages

Maybe you are looking for