Message sync and sending problem

Hi!
I run Nokia PC suite 6.8.22, Norwegian version, on WinXP Pro SP2. I have a Nokia N90 mobile phone which has just been updated.
When I choose "Messages" ("Meldinger" translated from Norwegian) in PC Suite it tries to sync PC with Phone. After a short while I get the following error message: "Updating messages failed. Check that the phone is in stand by modus and that date and time is set on the phone" ("Oppdatering av meldinger mislyktes. Kontroller at telefonen er i standby-modus, og at dato og klokkeslett er angitt i telefonen" translated from Norwegian).
I have reinstalled PC Suite but that did not help.
I have tried both Blue Tooth and USB cable, same result.
What could be wrong?
Arne

http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

Syncing and Charging Problem with 1st gen iPod nano

I purchased a 1st generation iPod nano via eBay about 3 months ago and have developed an interesting syncing and charging problem. When I plug the nano to my iMac, frequently neither the computer nor iTunes will recognize it. I have done "the five R's" with occasional success. I've tried jiggling the cable in the computer port and sometimes it works in getting iTunes to recognize the nano, sometimes it doesn't. Even when I am able to get iTunes to recognize the nano, I have frequently found that the nano hasn't charged up at all. In fact, a couple of times I found it almost totally drained of power after having been connected to my computer. Yes, I have the most recent version of iTunes installed on my iMac and my iMac, by the way, is relatively new - having been purchased in May of this year. What is interesting is that I've taken my nano to work and it has absolutely no problem charging up on my Dell (yuk!). For the record, I do not have iTunes installed on my work computer and I am not allowed to add any apps to my work computer without the consent of my supervisor. The chances of getting iTunes installed on my Dell at work are pretty much nil. Any suggestions on how I can fix the problem?

I bought a new USB dock connector and hoped, with fingers and toes crossed, that something positive would happen. Sure enough, I was able to sync and recharge my old iPod nano. I guess the original USB dock cable is on its last legs. Not totally broken, but no longer reliable. I consider my problem solved! My thanks to everyone who took the time to read and try to solve my iPod problem. I greatly appreciate it!

Ipon nano 3rd generation red. Sync and storage problems.

I have just got the new iPod nano (product red) 8 GB capacity. When i started to sync with my Intel Macbook i got suprised with a sync and storage problem. It starts syncing and suddendly it stops and lock the iPod and the Itunes. The must surprising is that happens every time the storage capacity reaches about 300 mb of music. Does anybody got this kinf of problem?
I have tried all the solutions I have found: formatting the iPod, connecting on a PC, restoring the factory settings and nothing works.

You'll want to copy what is currently on the Nano to your iTunes library on the laptop. Your iPod can only be synced with one iTunes library at a time. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

G -MAIL FAILS TO SYNC AND SEND PICTURES

Was working OK
3 days ago my signup ACCOUNT Gmail no longer SYNCs or sends out pictures
Removed battery, *228
Next?

im kinda having same problem i cant get my emails that are sent to my gmail account unless i go to gmail icon and load up emails then go into settings and hit refresh button then email will come to phone and i have everything in settings set right anyone else having this problem im also not getting anything from facebook and also if someone sends me a picture message it comes almost day later.

Need help: message split and send in BPM

i have this mapping where the idoc has to be split first before passing it to a BPM. the mapping should perform like this
from
IDOC
   segA
     segB1
     segB2
     segB3
   /segA
/IDOC
to
IDOC
    segA
      segB1
/IDOC
IDOC
    segA
      segB2
/IDOC
IDOC
    segA
      segB3
/IDOC
I was successful in doing the 1st step of mapping requirement for the above transformation. The next step was to map per occurence of IDOC to another target message and send it (ex. above is 3 occurence of IDOC, so there should be 3 mapping and sending that should happen. My problem now is how to design the BPM for this. Any suggestions?
Message was edited by:
        Brian Lo

create one MT such as
root
|__IDoc
|__segment
duplicate the subnode in the target message mapping (right click on the node and select dupliate subtree) and ten do the mapping...here u can go 4 this approach only if the number of number source segments (ie. sega, segb1, segb2, segb3) are constant....have read in coupe of threads that split mapping is not possible for idocs.....u may also need to check on it

Iphone4/ texting receiving and sending problem

My iphone4 sporadicly doesn't receive a text and when sending I sometimes get "message failure" and the message DID go through... any thoughts on this?

Found the problem. For anyone who experiences the same:
Go to:
-Phone call area
-settings
-smart dialing
-country code: +1
-area code: your area code
-Nation Number link: 10
-Use 1 for nothing (off)
-Click reset button at the bottom

Sync and Disconnect Problems

After recent I-Tunes update, I-pod nano 3rd generation says it is syncing and then automatically disconnects and prevents another sync from occurring because of the message that "I-Pod cannot be found." Restarting computer and reopening I-Tunes does solve the problem. Resetting the I-pod did not solve the problem. New music can be added to any previously created playlist that I had created that shows up on the computer; however, any new playlist, along with any music added to the new playlist, will not sync and show up on the handheld i-pod. This only began occurring after the recent I-Tunes update. Sorry I ever did the update. It's been time consuming searching for a solution when the problem is on the end of the new update.

Does Apple care about it customers?
Too many customers having I-Pod problems and glitches that Apple does not appear to be addressing.
Looks like they only care about the initial purchase and leave their customer out in the desert for any problems that are created by their updates!

Ipod New computer sync and homeshare problem?

I recently purchased a new laptop and used home share to transfer my i tunes libary. The first problem is i tunes has not moved all my music only the items purchased on i tunes which is only 5 albums! How do I get it to transfer all of my music?
Also on to 2nd problem, my ipod classic wont sync with my new laptop, I am not getting any error messages. I just click sync and its says syncing but after a couple of seconds ejects my ipod?
Please help, I want to turn my old computer off and get rid of it but cant until I have my music?
Thanks

I have a new computer and would like to take my
existing songs on my iPod shuffle and move them to my
new computer, but I receive a "sync and erase" error
message because my iPod is currently synced with
another computer. I understand that I'm not able to
sync with two computers, but is there a way to move
my current playlists to my new computer? I don't
want to sync back and forth- I'd like to swtich to my
new computer and stop using my old computer.
Hopefully, there's a way to permanently make a
switch.
Thanks for any help and suggestions.
See second post in the following thread:
http://discussions.apple.com/thread.jspa?messageID=3795711&#3795711

Syncing and recognition problems

When trying to sync my iPhone as usual my Mac does now not recognise my iPhone. When I put in my password the Mac accepts the iPhone, tells me it is already registered, then stops the sync and tells me the iphone is not recognised again. What should I do?

Thanks navhari but that did not do it. I wonder whether the problem relates to the fact that my wife also uses the Mac with her iphone sometimes. We have existed like this for ages but this is a new problem today. When asked to register my iphone her itunes account address pops up, not mine, so I change the address to my own and try to log in ar described above.

HT2729 How do I transfer a folder the library screen so I can sync and send it. To my iPad?

Help
How is a folder of photos moved from the harddrive to the iTunes. Library page to sync it and send it to the iPad ?......??.?.?.

To print directly from your iPad you will need to use AirPrint, and have an AirPrint compatible printer. Take a look at this link, http://support.apple.com/kb/HT4356

Serious M-Audio Profire 610 sync and dropout problem

After an, over a month, waiting for a solution to the problem from m-audio, I have to post the problem to the community:
I m using an early 2009 8-core MAC PRO with M-Audio Profire 610, using it for video editing with Final Cut Pro (and sound design with Pro Tools).
The problem is that since I've updated the machine to 10.6.7, I m experiencing VIDEO dropouts in Final Cut, the very first playback seconds of EVERY video track (on every codec) that I try to preview and at any point of it.
Also, occasionally, the audio-video sync is lost and I have to pause-play in order to gain the sync back on..
When I switch the audio output to Built in audio or Display audio, the dropout and sync problem disappears. When I switch back to Profire 610 the dropout starts again.
The video and audio settings and the tracks encoding are the same for at least 2 years now, since I m working ALLWAYS with my P2 panasonic DCVPROHD camera, with which I have shot and edit in my MAC PRO multiple videos, including a feature film..
I have tested the problem on two Macbook pros (early 2007) that I use for the shootings and the problem is there also !(when I plug the Profire 610)
The last think that I 've tried on my main unit, was:
-do a zero data format to my vertex 2 ssd boot drive,
-do a clean install of Snow Leopard (10.6.0)
-restore the system from a time machine backup (the os still remains 10.6.0)
-run 10.6.6 combo update
-uninstall the profire driver
-repair permissions
-install the profire driver (for 32 bit 10.6.6)
-repair permissions.
The problem's still here.
I m stuck with my projects here… Is there a solution out there?
Thank you very much for the attention
Diamantis

So, to be clear, it happens when the FirePro 610 in connected, and does not happen when it's diconnected?
That is obviously directly related to the FirePRo 610 having some hardware latency issues on an OS level. That's up to M-Audio to fix. There was never anything wrong with your Mac, there's something wrong with the M-Audio unit, obviously.
Do you have a FW hard drive plugged in? If so, will it work correctly without any other FW devices connected?
It could be defective.
http://forums.m-audio.com/showthread.php?10302-Firepro-610-on-Mac-OS-10.5.7&p=46 873

Sync and Wifi problem (iphone 3G 3.0)

So I've been updated to 3.0 since launch day, and I've been having these problems.
First, when I plug my phone into my pc to sync, sometimes (more often than not) just disconnects and reconnects in a loop, and will do so until I unplug it. I've tried every port in my pc, and it still does it. I switched it to my laptop, and no problems. I've reinstalled itunes and the mobile device drivers, and can't think of what else I can do to fix it.
The other problem is that my phone won't stay on wifi when it is connected. It will continually switch on and off, and my browser and apps will tell me that I don't have a connection to the internet, even if I have 3g service while the wifi is disabled. Just started doing that with 3.0. I've reset my phone, powered on and off, and factory restored it twice. Not sure what else I can do, thanks!

Restored my phone again, still no change.

Lock and Send problem

I have problem with Essbase Add-in not locking and sending. We can get it to lock and send once on a new app, but can't do subsiquent locks. Is there a setting issue? We have two servers, one Essbase 6.1.3a and NT4.0, the other Essbase 6.5.3 and Win2K and both have same problem. I would appreciate any help offered.

If the data is in the ATX file, I would say your lock and send is working.I am trying to work out what "doesn't work" means ... do you get #missing when you do a retrieve or just an old value?You say this works on a new app ... i.e. is this an EMPTY app? ie. does the first entered value retrieve back into Excel?It is possible that you have an implicit share issue here ie. one parent/one child situations in the hierarchy.

I cannot complete stage 3 for setting up messages; 'tap and send' - any advice?

Any advice to complete set up of messages on my new ipad? I cannot complete 'stage 3 - tap and send'?

A fairly common error people make when using messages, is to type their outgoing message in the Subject field which is just above the Message field. In fact, I think it's a good idea to turn the message field to OFF.
Settings/messages/turn subject field off

Sync and user problems

Hello,
Because I needed to Bootcamp my mac I had to reinstall my OSX system.
Oke, no problem I had a back up with Time-Machine.
So I reinstalled my mac and I aks for Time machine to put everything back on the system.
After it was completed it asked me to restart my computer. When I did there came a message "restart your computer" and it keeps repeating itself so i can't do anything.
(I reinstalled it again and it worked fine but when I wanted to put it again on the system it failed again.)
So I wanted to fix it manual by dragging my programs, but that doesn't work either because I have no permission to acces my files. Because I had to make a new user account.
(I really don't see what's the point when you can't put your files on a new system/computer.)
Anyone know how to fix this?
thanks,
kama
Message was edited by: kamakama

Your backups may be damaged/corrupted.
Try to repair them, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
If that finds and fixes problems, try the restore again.
If not, your best bet may be to do an +Erase and Install+ of Leopard from the Install disc, then use +Setup Assistant+ when your Mac restarts, per #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Then download and install the the "combo" update. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Message sync and sending problem

Similar Messages

Maybe you are looking for