Message, this document too old can't be opened. To open it , save it with Pages 09

Keep getting the message, this document too old can't be opened, save it with Pages '09 first? I recently purchased the new Pages, yellow Icon. My old Pages was '08. My new Pages doesn't say what it is except the version 5.0.1. Where do I get version '09 to save all my of Pages docs. so I can open them. Or do I just keep my old '08 version active and open them through it?

You can use iWork 08 on MacOs Mavericks for the PAges 08 documents. If you eally need to have them in Pages 5 you can try in Pages 08 save the document as/export to Word format and then open in Pages 5.
I would just continue using iwork 08. PAges 5 is a mess.

Similar Messages

This document can't be opened because it's too old.To open it, save it with Pages '09 first.

Bought new MAC desktop tried to open old Ipages and I get this message, what do I do now?
This document can’t be opened because it’s too old.To open it, save it with Pages ’09 first.
Thanks

If you migrated your old system to the new Mac you should still have Pages '08 in your Applications/iWork folder.
Open your document in Pages '08 and Export it to Word .doc/.docx and open that in Pages 5.
Peter

As I like open a file it coms message This document cannot be open because is it too old. First open by Pages 09 What I have to do?? I do not have Page 09 any more.

As I like open a file it coms message
"This document cannot be open because is it too old. First open by Pages 09"
What I have to do?? I do not have Page 09 any more. I've got Pages Vers.5.0.1

I suspect you have created the documnet's in Pages 08 or earlier. Do you have the iWork 08 DVD so you can install it? Then update to from this link Pages 08 3.0.3 Use it for you older documents and use Pages 5 only for new documents.

I have transferred my documents from iMac to macbook air, but when I try to read then I get the message "This document is too old. Download it to version 09. How do I do that?

I have transferred my pages documents from my macbook pro to my macbook air, but I cannot read them as I get the message "This document is too old. Download to version 09". How do I do that? I spent over an hour on the phone to a technician at Apple but he was no help.

I have the same issue having replaced my 07 iMac for a new iMac, I was using iWork 08 (Pages) and all my Pages documents cannot be read by the latest iWork (Pages). I get the same message and, although I have worked out that any that had been exported to Word format can be read and then re-saved, I cannot now open the purely Pages documents to export them to Word first. I am amazed that the new Pages cannot read Pages 08 document but can continue to read Word ones! So, how can I get my hands on Pages 09, so that I can re-save them in the current Pages format?
Martin

HT1750 Pages, This document can't be opened because it's too old. To open it, save it with Pages 09 first still can't open pages document

I recently purchased a new Mac and I am having difficulty opening older Pages documents.
Pages, This document can't be opened because it's too old. To open it, save it with Pages 09 first still can't open pages document

Either you have access to Pages ’08 v3, Pages ’09 v4, or neither. One of these older, but more functional versions of Pages can open, and export the document in question to Word. Preview on OS X 10.9.5 and Yosemite can view Pages ’08 documents (in my experience). It is not obvious to me that Preview may be using the installed Pages ’09 v4.3 to assist in opening these '08 documents.
Once opened in Preview, you can select/paste text into Pages v5.2.2, or v5.5. If you want the images from the PDF, then export it from Preview as PDF, and then drag/drop onto latest free LibreOffice icon in the Dock, which will open the PDF for editing. Select, copy, and paste the images into Pages v5, or incorporate into Text boxes, or Shapes. When pasted, images will be in their original size/resolution, not necessarily as small as they appear in the PDF.
If the second paragraph is a chore, then follow Peggy's advice above on the sources for purchase of Pages ’09.
In the future, I would not recommend trusting document architecture to Apple, and use a more accessible format (.doc/x) for better cross-platform access, longevity, and application choice. You may find LibreOffice, or Office for Mac 2011 a better choice for features.

Pages 5.1 error "This document is too old. To open it, save it with Pages '09 first."

When trying to open a Pages '08 file from a MacBook Pro in Pages 5.1 on an iMac, I get thr error message, "This document is too old. To open it, save it with Pages '09 first". I cannot locate a Pages '09 to use. I can export the file from Pages '08 into a Microsoft Word Doc file and can open it then. How I do I solve the problem and open files in Pages 5.1?

It is A solution that works if you don't have too many Page files to convert, but is very poor solution if trying to move everything off of the MacBook Pro to the iMac. I don't necessarily need to open the 5 years of files, but if I need to look at something archived, I'm dead in the water.
It doesn't make sense that a Mac can open a Microsoft product but cannot open a Mac product. I can understand that a program is not forward compatibale, but almost all programs are backward compatible. This same problem appears with Numbers 3.1.
Apple needs Microsoft as a solution?

I was writing a very important document; I saved it and I closed pages, now when I try to open it, I have a message with "it's impossible to open this document". How can i fix it?

I was writing a very important document; I saved it and I closed pages, now when I try to open it, I have a message with "it's impossible to open this document". How can i fix it?

When you have 2 versions of Pages on your Mac:
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Error message: "This document contains photoshop data which appears to be damaged."

I saved the file I was working on by choosing "Save" from the "File" menu. Unfortunately after 10 min as I saved my work my PC had "issues" and needed to be manually shut off. I was trying to open the psd file after restarting my computer and I get this error message: "This document contains photoshop data which appears to be damaged. Continue and ignore the photoshop data?" I clicked okay and then I get just a black screen. No Layers or any pictures.
I have tried to preview in Graphic Converter, in Illustrator, in ACDSee, etc... Nothing... I just get a black screen. Also, I have tried file recovery programs: Stellar Phoenix PSD Repair V1.0 and Advanced PSD Repair v1.4
The program Stellar Phoenix PSD Repair V1.0 was able to recover only BMP picture 3.4 KB, it is so tiny that you can't see anything on the picture.
I also have tried to install plugin "psdrecover", for Adobe Photoshop. Unsuccessfully for some reason. The plugin does not want to be installed into the "plugins" folder. I did follow the instructions.
I am using Photoshop 6 version and Windows 7 operating System.
I am in dire need of help. I've been working on it for days. Is there any way to recover that file back?

I hate to be the bearer of bad news, but you're likely out of luck. We almost never hear of anyone recovering image data from a damaged PSD.
Some thoughts:
1. Set up backups.
2. Get in the habit of saving your master file in several different locations as you work on it.
3. Consider upgrading to Photoshop CS6, which auto-saves your work in the background. I'm not sure whether it would have recovered the data in your particular case, but it's possible.
4. Don't feel bad - go back and do the image again, and I'll bet it comes out even better in less time.
-Noel

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
Gael

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

I am using a program that opens a document in adobe and I need to save it back in the program. I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform. Help

I am using a program that opens a document in adobe and I need to save it back in the program. I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform. Help

Have you contacted the people who make the program? It sounds like something special from that program.

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

When printing web based .pdf or regular .pdf I get message "This document failed to print"

When printing web based .pdf or regular .pdf I get message "This document failed to print". I've ran the HP Diagonistic tool and no errors are found. I've gotten the same message on many different .pdf's so I don't believe it is a margin issue.

Are the static IP addresses inside the DHCP range? If so, move them to ones outside the range.
Also, have you set the IP address in the printers' embedded web pages (via IP address in a browser) to match the ones set in the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error message: "There is no default application specified to open this document." How do I find app. to open file??

I am trying to NETGEAR software for a Wireless USB adapter. When I put cd in and click autorun.exe file it says "There is no default application specified to open this document." How do I find app. to open file??

Or if you get stuck, post back with details of the Netgear device you are attempting to use.
I'm sure that we can get it to work, but be prepared that it just MAY have to go back, if for example it requires Mac OS X 10.4 or later - I found a lot of networking USB dongles seem to require OS X 10.4.11 or later. But Netgear are one of the better device manufacturers, so I'm hopeful it'll work just fine.

Message, this document too old can't be opened. To open it , save it with Pages 09

Similar Messages

Maybe you are looking for