Message to be make error for specific user id

Hi Experts,
I have converted message 06 28 to error to not allow to create PO in back date. Now i want to allow some User ID's to create PO in back date. Is it possible ??
Regards,
Manish Jain

Yes. Use versions function.
After having saved the message categories as different versions, you can assign a version to certain users. This results in the same message appearing as an error message for one user, but as warning for another.
For this purpose, you must assign the parameter ID "MSV" and the version number to the relevant user master records.

Similar Messages

Oracle Portal Portlet 404 Error for Specific Users

I have a single portlet in Oracle Portal that is returning the message "Error: The listener returned the following error: 404 Not Found" that is occurring for just 2 out of my 350+ users. I have tried clearing user cache, clearing portlet cache, deleting these two users from portal and recreating their accounts, changing their usernames, rebooting the entire app server and nothing is working. There are other users for which the portlet will return the exact same data that the 2 problem users are requesting without an issue.
Portal version is 10.1.2.3. Any help that anyone can provide would be greatly appreciated as I am about ready to beat my head against a wall.

Hi Kirk,
Please check below MOS ID, your issue will be resolved.
Error: The Listener Returned The Following Message: 404 Not Found [ID 456421.1]
Mark if this helps you.
Regards,
Kishore

Disable release flag in service entry sheet for specific users

How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
Can any one suggest?
arjman

Hi dear,
In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
this will not allow the user to release the SES.
Hope it Helps,
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 21, 2011 12:40 PM

How to apply Software Restriction policy for specific user in local group policy object ?

I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject API

I achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make repricing for specific conditions at the time of billing?

Hello
I'm SD Pricing person. Let me ask here experts below my concern.
In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
So when customers buy such products, they have to pay more as recycling fee including invoice amount.
My question is... we want to make repricing for recycling conditions when the billing is created.
Based on our configuration, recycling condition is not defined as a kind of tax condition.
So this value is just copied from sales order.
(pricing type in copy control is 'G' which means repricing for tax condition.)
In this situation, we want to make repricing for those conditions during operating system.
Is there any easy way to cover this?
As I think, this is not easy because the system is already operated.
To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
So I want to put this way to the end of my choice.
For this requirement,
1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
(ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
But transaction data are created now and all open orders will be affected.
2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
3. To change pricing type in copy control is almost impossible because of the impact.
What can I do this in this situation?
What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
Thank you in advance.

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

Find Label Missing in Advanced Search For Specific User

for specifi users FIND label is showing but some of the users in advanced search this find label is missing . top of the applictaion it is there
plz let me know why this is problem is coming
find button should visible to all users......................
give me repaly ASAP

Hi
CRM 5.0
its not related to application,modification ..but my problem is the find label is working for some of the users.but some of the users find label is not there,
plz let me know where i have to make corrections for this problem........

MIGO - Challan NO : Feild mandatory for specific user

Hi Experts,
I want to make the Callan No in the MIGO as mandatory for specific users.Can any body tell me how to do this ?
Regards,
Lakshmi.

Dear
There is two possibility.
1 - SPRO->Material Management->IM and PI-> Settings for enjoy transactions ->settings for goods Movements (MIGO)->Field selection for MIGO.Then against Field name choose the radio button Req.
This will impact for all the user.
2 - If you would like to restrict for particuar user than use of SHD0.
Create screen/transaction variant of MIGO through SHd0. In this put your req. field compulsory.Revoke the authorization of MIGO from particular user and assing the new transaction code done through SDH0 to this user.
Due to this you can control req. entry in MIGO for particular user.
Regards
Rajan

Need SP_TN for specific user must use specific document series and warehouse in Marketing Documents

Hi experts,
   I need SP_TN for specific user must use specific document series and warehouses in Marketing Documents SAP B1.
   Kindly give solution ASAP.
Thanks in advance

Hi Nagarajan,
   It show (1) Not allowed to add PO.
   I used the following SP
IF @object_type = '22' AND @transaction_type IN (N'A',N'U')
BEGIN
IF Exists
(SELECT T0.DocEntry FROM POR1 T0 INNER JOIN OPOR T1 ON T0.DocEntry = T1.DocEntry
WHERE T1.DocType = 'I' AND T1.Series = '142' OR T1.Series = '145' AND T0.[WhsCode] = 'STEX-01'
or T0.[WhsCode] = 'STNEX-01' and T1.[UserSign] ='1'
and T1.docentry = @list_of_cols_val_tab_del)
BEGIN
SELECT @error = 1
SELECT @error_message = 'Not allowed to add PO'
END
END
warm regards,
Guhan

Lock Transaction for Specifi Users

Dear All,
Good Day,
We are planning to lock the transaction for specific user who doesnot use the transaction more than 3 months.
Please suggest me what will be the procedure.
Thanks in advance,.
Best Regards,
Suresh Kumar K

Hi Suresh,
Your idea of restricting users in using t-code is good practice. But as of now there is nothing like you can restrict user by locking t-code only for tht user/users alone.
1. You can lock the T-code but this will affect entire system.
2, You can remove t-code from the role, but this affect other user and if you wanted to make another role for only this user it will start getting to be tedious job, since you have to delete some roles create some other and alos user may use some t-code once every quarter for some of quarter end results and you have to seperate these t-code from others which was not possible, this will not workout so easily.
The only option could be probably if user doesnot login for more than 3months just lock him.
Regards...

IW32- order-print is giving error for particular User.

Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.

Hi,
Information about dump:
1. User and Transaction:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06.05.2011 10:47:40
     MM Used. 13116304
     MM Free. 3639760
User and Transaction
     Client.............. 700
     User................ "BLADEF01"
     Language key........ "N"
     Transaction......... "IW32 "
     Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
     Program............. "/MRSS/SAPLRSG_PM_ORDER"
     Screen.............. "SAPLCOIH 3000"
     Screen line......... 33
Information on where terminated
     Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
      "/MRSS/RSG_MAINTAIN_MRS".
     The main program was "SAPLCOIH ".
     In the source code you have the termination point in line 441
     of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
    Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
     "/MRSS/RSG_MAINTAIN_MRS".
    The main program was "SAPLCOIH ".
    In the source code you have the termination point in line 441
    of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
    "/MRSS/RSG_MAINTAIN_MRS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1.1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2.2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI

Data Level security for specific Users

Hi,
Can you please suggest some ideas on by-passing the Data Level security for specific users or specific group?
Currently, we have data level security defined on a group permissions for one group and for people belonging to another group, the security should not apply and they should see entire data.
But, key thing here is that, the user belongs to both the groups.
Any ideas helps.
Thanks,
Chandu.

So you are saying you want a user to belong to a group with data-level security filters, but you don't want the filters to apply to that user?
Why are they in the group then?
Are the data filter defined with variables or are the hard-coded?
If variables, you may be able to put logic in initialization block to set the variable appropriately for specific users.
I'd rethink the security model - when I define data level security filters, I tend to force users to only belong to a single group/role.

Hide settings icon for specific users

Hi
In share point 2013 we have settings icon at top right corner.
Is there any way, I can hide this icon for specific users.
Please help in this regard.
Thanks,
Anil

Hi Kumar,
Its possible.
1.Open the .master page in some textpad/SP Designer.
2.Look for below tag. This is the holder for SITE ACTIONS
<SharePoint:SiteActions
3.Look for the Menu item templates. These will clearly give you an idea on wht they will hold.
<SharePoint:MenuItemTemplate
4.There will be 2 attributes for each menu item called
PermissionsString & PermissionMode.
In the permission string give the required permission to the user to be shown or hide.
http://sharepoint.stackexchange.com/questions/66628/edit-settings-gear-icon
Please remember to click 'Mark as Answer' on the answer if it helps you

Hiding P0002-PERID for specific users

Does anyone know how to hide the social security number field field for specific users? We are trying to hide it both at the header level and detail level of IT 0002.
Thanks

Jeff,
Follow this link http://www.*********************/hr_security/hr_security.htm, otherwise request your SAP Security person/team.
Thanks,
Kiran.

Log transactions for specific users

Hi, How can I get the log for specific users, such as SAP_ALL : I want to know which transactions they have accessed in the last month for example or if they have accessed to a specific transaction.
Thks !

Hi,
try tranction ST03N (Workload Monitor)and select "User Profile" in the Analysis View. There, you can see a list of Users. Double click on any of them to see the accessed transactions.
Kind regards
Dirk

Disable sound for specific users

How do I disable sound for specific users?

Theoretically if the user's not in the audio group, he shouldn't have access to sound devices.
$ ll /dev/snd/
total 0
drwxr-xr-x 2 root root 80 Oct 2 19:30 by-path
crw-rw----+ 1 root audio 116, 2 Oct 2 19:30 controlC0
crw-rw----+ 1 root audio 116, 8 Oct 2 19:30 controlC1
crw-rw----+ 1 root audio 116, 7 Oct 2 19:30 hwC0D0
crw-rw----+ 1 root audio 116, 13 Oct 2 19:30 hwC1D0
crw-rw----+ 1 root audio 116, 14 Oct 2 19:30 hwC1D1
crw-rw----+ 1 root audio 116, 15 Oct 2 19:30 hwC1D2
crw-rw----+ 1 root audio 116, 16 Oct 2 19:30 hwC1D3
crw-rw----+ 1 root audio 116, 4 Oct 4 09:12 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Oct 4 10:13 pcmC0D0p
crw-rw----+ 1 root audio 116, 5 Oct 2 19:30 pcmC0D1p
crw-rw----+ 1 root audio 116, 6 Oct 2 19:30 pcmC0D2c
crw-rw----+ 1 root audio 116, 9 Oct 2 19:30 pcmC1D3p
crw-rw----+ 1 root audio 116, 10 Oct 2 19:30 pcmC1D7p
crw-rw----+ 1 root audio 116, 11 Oct 2 19:30 pcmC1D8p
crw-rw----+ 1 root audio 116, 12 Oct 2 19:30 pcmC1D9p
crw-rw----+ 1 root audio 116, 1 Oct 2 19:30 seq
crw-rw----+ 1 root audio 116, 33 Oct 2 19:30 timer

Message to be make error for specific user id

Similar Messages

Maybe you are looking for