Message to open old FM period

Hi,
We are on ECC6 EHP 4 and implmenting the BCS part of FM. FM activation is year is 2014. I have the folllowing issue.
When I tried to post the MIGO (posting date Mar 2015)entry for old purhcase order (PO date is 2 Nov 2013), I am geting error message saying FM period 008/2013 not open for value type 51?
I do have few open items from 2013 onwards, do I have to open the FM period from 2013 onwards?
Please advise
Regards
Shailesh

Hi Shailesh,
This error message is issued due to the reduction of the PO that the system is trying to do while posting MIGO.
It is important that you know if you are PBET or not.
You see if PBET is activated in your system in transaction SE38 -> report RFFMMONI -> Run -> Click on your update profile and you will see if PBET is marked.
You can also check if you are PBET in transaction OF39 as PBET can be active in your system either for your whole FM update profile or for individual value types.
If you are not PBET, you can use transaction FMIR to open the period for the posting.
If you are PBET and wants to post without considering PBET logic (with PBET active, all postings have to be chronological, hence a PO reduction or change cannot be done in an earlier date) you can consider transaction FMOD but only if you have just few open items to be posted and few users that would do this task. When the task is finished, remember to remove the users from FMOD otherwise everything that they will post will be in that date. FMOD should be blank in your system before all the open items were posted.
I hope this helps.
Regards, Vanessa.

Similar Messages

  • I keep getting the message that I need to download the images update to open old documents.  The update was downloaded on 11/24/13.  Checking for new updates shows all updates have been made.  What is the issue?

    I keep getting the message that I need to download the new update for ipages when opening old documents.  The latest update that I have download was done 11/24/13.  When I check for updates it shows that there are no new updates available.  I downloaded Maverick a few weeks back on to my iMac.  What is the issue

    You have both your older iWork apps and the newer Maverick apps on your computer.
    The new Maverick apps are in the Applications folder.
    The older iWork apps are in the Applications/iWork folder.
    Of the two, the older iWork apps are more useful so don't throw them out.
    Check out about Pages 5, keeping the older Apps and how to manage updates here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=6f02f15454adf b3c68b0a871f2ed6447&mforum=iworktipsntrick
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
    Peter

  • Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

  • To oprn old posting period

    Hi all
    Posting period open in my system is 03/2007.
    I want 01/2007 to be open and all other periods to be closed.
    How can I do it?Please explain in detail.Should I close 03/2007 by using MMPV and then open 01/2007?If so, how to open 01/2007 period, i mean T-code?
    I tried OBSY but error message"data cannot be initialised".

    Hi
    You have to use MMPI.
    But you may need to follow the instruction from OSS note 487381.
    regards
    Srinivas

  • Can't open old PDF's

    We recently got new updated computers but we kept some of our old files. I downloaded the adobe reader x and everything, I still can't open old PDF's (saved and unsaved ones like from my email). Something with Microsoft Word comes up, and all funny writing and numbers and such! The only way I can view an old PDF's is I save them again, go to the Adobe Reader X icon on my desktop, and open the file(s) from there. It's quite a hassle because sometimes I don't want to save something, or have more than one PDF open! Help please. (I'm pretty much computer "stupid", so it might be just something small!)
    If you have any ideas for me, feel free to reply below or email me at [email address deleted by host]
    Thank you so much (:
    Message was edited by: -esther-

    Moved to Adobe Reader

  • Old Logic + a new Mac = can't open old projects anymore. De/re-install?

    Hi everybody,
    maybe someone can advise me with this problem:
    I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
    1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
    2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
    3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
    Regarding all 3 issues:
    I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
    But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
    Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
    Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
    Or completely re-install the whole Mac? (pleeease no....)...
    If anybody has any idea, it'd be highly appreciated.
    Thank you in advance and for the energy to read my little novel here,
    cheers,
    Joern

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    What version was the old library made with?
    What is the exact message? when it hangs does it crash or do you have to force quit?
    LN

  • Cannot open old Illustrator files (pre version 8) in CS4 trial

    Hi
    I am thinking of upgrading from Illustrator CS2 to CS4. However, I have downloaded the trial version and have found that Illustrator CS4 cannot open old Illustrator files earlier than version 8 (pre 2000) whereas Illustrator CS2 had no problem with this. I do not want to resave my old files as there are way too many of them (hundreds!).
    I am running Windows XP.
    Has anyone else had this problem?
    Thanks

    Exactly what happens when you attempt to open one of these old files in AI 14 (CS4)? (If you get an error message, what does it say?)
    Can you post a sample file up on a server or service and provide the link here? That way, others with AI 14 can test to see whether it's something peculiar to your installation.
    Please also tell us exactly how you are attempting to open the files. (Double-clicking in Explorer? Using File | Open from within Illustrator? Dragging and dropping onto an AI 14 shortcut?)
    >...CS4 cannot open old Illustrator files earlier than version 8...
    I find it very difficult to believe AI 14 can open version 8 but not version 7 files. There was no significant change in the native file format.

  • I can't open old mails, what can I do?

    I can't open old mails, what can I do?

    What happens if you click the continue button? Does it take you to Mail?
    One person solved it this way on the Mavericks community.
    Mail Upgrade message in Mavericks won’t go away – Welcome to Mail

  • I get the message, To open "Adobe Illustrator CS5.1.app" you need to install the legacy Java SE 6 runtime. What to do?

    I get the message, "To open 'Adobe Illustrator CS5.1.app' you need to install the legacy Java SE 6 runtime. What to do?

    Sorry, I didn't say it damages Java.
    Yes, I know. You were quoting from a post on Adobe's site.
    Correct me if I'm wrong but I think it wasn't since Mountain Lion.
    Yes, I think that's correct. Apple stopped installing Java as part of the OS after Lion. If you check the installers for Mountain Lion through Yosemite, there are a lot of root Java processes OS X still installs, or Java wouldn't work at all. It's just the actual runtime environment no longer installs. The user has to do that.
    that the application files are damaged. They are not talking about JAVA itself.
    What application files? Do you mean the Adobe apps themselves? If so, yes, it's been reported that the CS5 and CS6 apps in particular usually need to be reinstalled after upgrading OS X to Yosemite. That's actually an old problem that isn't a Yosemite only issue.

  • Fatal Error Message when opening PhotoshopCS4

    I am receiving a fatal error message when opening photoshop cs4. "Fatal Error -Missing Component (/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework" I was recently using the trial version of Photoshop CS5.1 but that trial period has ran out. Now I cannot open my file in CS4. Within that trial period, I also switched from using Snow Leopard to Lion OS. Could anyone shed some light on the issue?! I need to get some work done!

    See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

  • Cannot open old tif files

    When I try to open  old,  saved  TIF files in CS6, the followingt message appears, "Windows cannot find 'C:\Program Files\Adobe Photoshop CS5\Photoshop.exe'.  Make sure you typed the name correctly, and then try again".

    Open Bridge. Ctrl + K to go to Preferences or Edit > Preferences
    Choose 'File Type Associations' from the left side bar
    Look for TIFF format listed. On the right side of that, I guess it will show Photoshop CS5 for you. Click the dropdown, see if Photoshop CS6 is available as an option. If yes, click it, click OK to save. If Photoshop CS6 is not available, click 'Browse' from dropdown, look for Photoshop.exe in Program Files\Adobe Photoshop CS6\Photoshop.exe. Select that and now the dropdown will show that. Click OK to save.
    -ST

  • QT Player 7.4.5 won't open old .mov files

    I'm trying to open old (i'm pretty sure they were in animation compression from 2004, probably OS9) .mov files. The message says: The movie could not be opened. The file is not a movie file. Please help!
    Thank you!

    Try VLC or MPEG Streamclip as a start, both are free.

  • Open Mount Fuji or Open Old Faithful

    Occasionally when I hover on a spot in Safari 5.0.5 , a small text box opens up.  Its light yellow in background and has black letters that say: "Open Mount Fuji".  Sometimes the same thing happens, only it says: "Open Old Faithful".  The type is about 6 points and the message box is only large enough to hold the phrase. It hovers open for about 3/4 of second and fades away.   It happened just now while I was setting up this message.
    What Gives?

    Thank you CT.  I restarted, plus "Reset Safari" from underneath of the SAFARI pull-down menu.  No further sign of those pesky varmints.  I don't know what "tool tips" are - so I looked around a while.
    It seems they are not so popular, but if anybody else come behind us on this thread, this link from a Mac users and tips magazine helps explain the darn things.
    THANKS FOR THE HELP!!!
    <http://www.macosxtips.co.uk/index_files/disable-tooltips-safari-firefox.php>

  • Lion OS - I cannot open old Word Documents

    I have recently installed Lion OS. I can no longer open old versions of Word Documents (.doc) in Office 2011
    I have tried to install the Service Packs 14.0 and 14.02 but I get the message that "essential software is missing." I have tried to run Software Update, but "all my software is up to date". I have also tried to re-install Microsoft AutoUpdate (successfully). But still no joy....
    What do I do?

    Pages 5 will not open Pages '08 files or earlier.
    Pages '08/'09 should still be in your Applications/iWork folder. Use that.
    Peter

Maybe you are looking for

  • Message Mapping Issue in PI 7.1

    Hi Experts I am working on a Message mapping,  and I have the following structures on the Sender and receiver side -->InterfaceHeader -->DocumentHeader  (1-Unbounded) -->DocumentLineItems (1-Unbounded) -->InterfaceTrailer -1 Same structure on the sen

  • Plug in says to update Adobe Acrobat, but I have newest version

    I have updated and it has verified when I retried to update but yet the plugin still tells me to update as there is a vulnerability. Should I uninstall Firefox and reinstall?

  • How can I share a 4k clip as a 4K movie

    Hi, How can I export a 4K FCPX project as a 4K movie to be played at youtube or a computer. Thanks. Tareq

  • Export Clarification

    I'm trying to solidify my workflow, and I was hoping you FCP wizards could clarify something for me. When it comes to exporting finished video from FCP to create DVD's in DVD Studio Pro, I have seen several arguments over what is the best way. I'm su

  • Adding logo or image to email signature

    I have added my logo (a jpeg image) to my email signature. When I send an email to someone else who is using an Apple mail program it opens up fine. However, when I send an email to someone who is using, for example, a yahoo mail account, the logo do