Message too large for this organization.

Ok this is driving me a little crazy.
Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum Receive is set for 26MB (26624KB)
Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum send is set for 20MB (21480KB)
All Receive connectors are set for 26MB
Recipient User is unlimited.
I am still getting the below error on an inbound from the internet message just under the 26MB limit
RecipientStatus
: {550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization}
TotalBytes
: 26325981

Hi,
I noticed that the error "550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization" is related to SendSizeLimit. Please change the Maximum send value to 26MB and check whether the issue persists.
Organization Configuration -> Hub transport -> Global Settings -> Transport Settings ->
Maximum send is set for 26MB (26624KB)
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available.

I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HT3275 Message: This backup is too large for the backup volume?

Time Machine no longer backs up. I keep getting this message (This backup is too large for the backup volume) though I have excluded and deleted a huge number of documents, photos, etc. Help! Help!

Eunice19 wrote:
Time Machine no longer backs up. I keep getting this message (This backup is too large for the backup volume) though I have excluded and deleted a huge number of documents, photos, etc. Help! Help!
Do you have the Warn when old backups are deleted box checked in Time Machine Preferences > Options? If so, just remove the check and run another backup. Then Time Machine will delete your oldest backup(s) to make room for the new one.
If not, see #C4 in Time Machine - Troubleshooting, probably the pink box there. If that doesn't clear it up, post back with the amount of data being backed-up (ie, how much is on your internal HD and any others being backed-up), how large your backupd drive is, and whether there's anything else on it (if so, how much?).
A screenprint of the message might help, too.

Re Time Capsule: I get this message:This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available. Any suggestions? Please.

CAn anyone make some suggestions regarding this message. 'This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available.'

See #C4 in this terrific document provided by expert Pondini.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

"This backup is too large for the backup volume" - Info

Hi there. I had a problem with my time machine and got an error stating "This backup is too large for the backup volume". I did noticed after logging in that TM was indexing in the upper right corner [magnifier with a flashing dot(spotlight)] for a few seconds. So then I went on to "back up now" and it was preparing and then I got the Error message described above. So I uninstalled my anti-virus (you must disable auto protection/or exclude timemachine.app and its plist file (location below)from Anti-virus preferences in the case you have a anti-virus app, otherwise it will take forever to back up.) though that was not my issue. I then turn off time machine and deleted this .plist file in Macintosh HD > Library > Preferences > com.apple.TimeMachine.plist....STOP here if this fixed your problem after restarting. Time machine External Drive in Disk Utility **THESE STEPS WILL ERASE YOUR ENTIRE BACKUPS** ( "Erase" and rename or "partition" to make more that one partition on the External Drive if you wish, and Rename) (Disk utility> Partition tab> "option" you must - guid=intel / apple partition map=PowerPC)...sorry alot of newbie out there...by deleting the "com.apple.TimeMachine.plist" = when you plug in you TM it will ask you if you want to use the drive as a TM back up automatically. This did the trick. But to let you guys know I also used Cocktail (app) and used a feature it has to erase my computers spotlight index and rebuild it. Also in Cocktail, when you have your time machine plugged in you can erase its index and disable it all together. I recommend you first disable spotlight (before the first initial TM backup) in system preferences > spotlight> Privacy (tab) and plus to add time machine ...which has to be mounted (plugged in) to add from window under "Devices".

http://www.macfixit.com/article.php?story=20090403093528353

My time Machine keeps saying, "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 345.74 GB but only 289.80 are available." I have already excluded files. I have a 1tb external drive. HELP!!!

For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying
"This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable. Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

This backup is too large for the backup volume - ridiculous Size!!!

Hi .. i own a macbook 13" aluminium, I have Snow Leopard 10.6.2 , and i change my internal hard drive to a 500Gb.
I bought 1Tb Western Digital My Book USB External Drive to use it for back ups using Time machine.. at the beginning worked great, when i changed my hard drive i restore everything in lest than 2 hours.
Then one time, it said that the hard drive where going out of space, and i said to delete the oldest backups, it erase everything and kept the last back up. Since then, it came a message
*_+This backup is too large for the backup volume. The backup requires 2.73EB but only 995 Gb are available.*+_
its ridiculous, when i go to the time machine preference, it said that the full size back up it would take 83Gb only.
I tried everything, formatting the unit, taking out the partition , and making it out again, it makes the first full back up, but then the same message...
Please anyone... i am desperate
Thanks Again
Daniel

DanielFaour wrote:
*_+This backup is too large for the backup volume. The backup requires 2.73EB but only 995 Gb are available.*+_
Hi, and welcome to the forums.
That message seems to indicate that something is corrupted on your internal HD. Do a +*Verify Disk+* on it, per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
If that finds errors, you'll have to use the procedure in the yellow box there to Repair them.
If that does not find errors, Restart your Mac and do a "full reset" of Time Machine, per #A4 there.
I tried everything, formatting the unit, taking out the partition , and making it out again, it makes the first full back up, but then the same message...
What partition? Are there multiple partitions on your TM drive? How large is the one for Time Machine? Check the setup per #C1 of the Troubleshooting Tip.

This backup is too large for the backup disk

I have a 1TB time capsule used to backup two MacBooks. One backup file is 817GB (MacBook 1) and the other one is 137GB (MacBook 2).
I get an error message when running the backup on MacBook 2. It says "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 55.64GB but only 42.98GB are available"
I always though the TimeCapsule would automatically remove older backupos to make space and you would never run into such an issue.
Please not that my MacBook 1 was stolen a while ago so I do not know how to reduce the size of the larger backup.

Karl R. wrote:
I always though the TimeCapsule would automatically remove older backupos to make space and you would never run into such an issue.
Usually that's true, but not always. One exception is, Time Machine will delete the oldest backups of the Mac it's running on, but not any other Mac's backups. That's probably what you've run up against here.
Please not that my MacBook 1 was stolen a while ago so I do not know how to reduce the size of the larger backup.
First, connect to the TC via Ethernet.
If you want to delete all the backups from MacBook 1, double-click your Time Capsule via the Finder, then you should see two +sparse bundles,+ one for each Mac. Delete the one for the old Mac. That will take a long time, even via Ethernet. If it's taking extremely long, see the blue box in #Q5 of [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of this forum).
Or, you can delete individual backups of the other Mac. To see them, you'll need the +*Browse Other Time Machine Disks+* option, per #17 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum). To delete individual backups, see #12 in the FAQ, and don't miss the pink box there.
Message was edited by: Pondini

DTW error message - Data too large for the field65171

Am trying to run up General Legder Accounts using DTW in Version 8.8 and have been successful with Level 2. The customer has three levels only. The total number of characters for the various segments is 18 and I have double and triple checked that the column "Code" has exactly 18 characters. Even used "=trim" in Excel several times.
When I run DTW for level 3 it errors out and it displays the above error message. What is field 65171???
I thought DTW was supposed to be so much improved with 8.8 - where are help files that tell you what the errors are???
Regards - Zal

Hi ZAL,
I am facing this error too when exporting chart of account through DTW SAP 8.8 PL 19, although some of accounts are imported but in somme accounts saying the " data too large for the filed65171".
Account code is of 7, as it reuires 9 Max,
Please suggest me on this .
Regards
rps

Used Time Machine Backup Today- Now This backup is too large for the backup

Hey Everyone!
Some advice please,
My Hard Drive recently crashed. Fortunately, I've been using Time Machine. Apple Store gave me a new Hard Drive (for free), and I came home and restored to Time Machine. I am very impressed, and have lost no data or applications.
So now I have a problem. I can no longer back my hard drive, presumably because there were so many changes to the software today. I am getting This backup is too large for the backup volume. What is the easiest way to delete my old time machine backup and start from scratch with my computer in its current state? Everything seems to be working smoothly, so I don't see any reason to keep my old backups. Any suggestions? Is there any logical reason why I would keep the old backup?
Message was edited by: David Selevan

Thanks Barry!
I called Apple (had to anyway for a new OS Leopard DVD) and he had me go into Disk Utility and choose Erase Disk (as you suggested). I didn't have to do any formatting.
The next step was to go into System Preferences and select Change Disk and set it to None. After that, he had me choose Change Disk again, and select the USB drive, and click Use For Backup.
Now it's backing up the new version of my computer. Problem solved. Thank you.
After having to get an brand new Hard Drive today, I highly recommend that everyone purchase some kind of external hard drive and run Time Machine regularly. Although the backups get large, I've never experienced such a pleasant experience getting my files back after a hard drive failure. This is awesome technology. I can't believe 95% of my applications still worked.
David

TIME MACHINE Error: This backupup is too large for the backup volume ...

Hi Folks !
I have also my first problems with TM. It was running, the first time nicht&day to make the first backup and now seems the device to be full! This TimeMachineError was displayed:
This backup is too large for the backup volume. The backup requires 127.5 GB but only 46.5 are available. To select a larger volume, or make the backup smaller by excluding files, open System Preferences and choose Time Machine.
END OF ERROR Message
First thing > if I choose SystemPrefs/TM there is no chance to exclude file or folders the only dialog is for Volumes
Any Idea ?
Are the TM Preferences corrupted or why I cannot choose to define my backup ?
Ciao
Massimo

When my Time Machine disk had only 50GB left, I got the message that it couldn't back up because it required 118GB to do so. Because there was, for some reason, only one day backed up, I deleted the backup files to start fresh. Now I am getting the message:
"This backup too large for the backup volume. The backup requires 1056.6 GB but only 929.4 GB are available."
Well, the backup only require 118GB a little while ago, and the initial full backup that I deleted was 880 GB. Nothing has been added to the startup disk, and a 400GB disk has been excluded to try to make this work, so this message can't be right.
How do I make this work? Do I have to keep reinstalling Time Machine every time I want to backup?

Time Machine Error This backup is too large for the backup disk

Hi, I have a 1TB Time Capsule which backs up my Mac. I was having some issues with my mac so I decided to perform an erase and install and then use Migration Assistant to transfer everything back to my Mac.
After I reinstalled Snow Leopard and restored my Mac using Migration Assistant, Time Machine says that the backup has failed. It says " Time Machine Error This backup is too large for the backup disk. The Backup requires 663 GB but only 255 GB are available.
What do I do? Is my only option to erase my Time Capsule and have it back everything up from scratch?

Hi, thanks for the help. I erased everything off of the Time Capsule and it's backing up my Mac from scratch. It's almost finished backing up my whole mac. It's now at 641.86gb of 646.54gb but it's now backing up very slowly. It's backing up .1 every few minutes. Is this normal?
Here's the log from Time Machine Buddy:
Starting standard backup
Attempting to mount network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Mounted network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Creating disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/My Book
Backup content size: 850.0 GB excluded items size: 606.5 GB for volume Stuart's Drive
Backup content size: 425.9 GB excluded items size: 67.3 GB for volume Macintosh HD
No pre-backup thinning needed: 722.56 GB requested (including padding), 928.68 GB available
Waiting for index to be ready (101)
Copied 28.3 GB of 602.1 GB, 29340 of 1478089 items
Copied 55.0 GB of 602.1 GB, 41596 of 1478089 items
Copied 82.9 GB of 602.1 GB, 55899 of 1478089 items
Copied 110.7 GB of 602.1 GB, 63347 of 1478089 items
Copied 138.8 GB of 602.1 GB, 83831 of 1478089 items
Copied 166.8 GB of 602.1 GB, 94574 of 1478089 items
Copied 194.7 GB of 602.1 GB, 102854 of 1478089 items
Copied 222.8 GB of 602.1 GB, 114388 of 1478089 items
Copied 129159 files (242.5 GB) from volume Stuart's Drive.
Copied 248.4 GB of 602.1 GB, 130414 of 1478089 items
Copied 265.5 GB of 602.1 GB, 355699 of 1478089 items
Copied 293.6 GB of 602.1 GB, 382912 of 1478089 items
Copied 322.1 GB of 602.1 GB, 387974 of 1478089 items
Copied 349.8 GB of 602.1 GB, 399204 of 1478089 items
Copied 378.3 GB of 602.1 GB, 399358 of 1478089 items
Copied 406.9 GB of 602.1 GB, 399441 of 1478089 items
Copied 434.5 GB of 602.1 GB, 415817 of 1478089 items
Copied 461.5 GB of 602.1 GB, 471528 of 1478089 items
Copied 488.2 GB of 602.1 GB, 537277 of 1478089 items
Copied 515.1 GB of 602.1 GB, 580446 of 1478089 items
Copied 541.3 GB of 602.1 GB, 590386 of 1478089 items
Copied 566.8 GB of 602.1 GB, 602496 of 1478089 items
Copied 593.3 GB of 602.1 GB, 649575 of 1
Message was edited by: Stuart Lawrence
Message was edited by: Stuart Lawrence

"This backup is too large for the backup disk" WHY?

My iMac has a 2tb internal drive.
I got a 4th gen 2tb Time Capsule to back it up.
Problem is I get this message - "This backup is too large for the backup disk. The backup requires 2.10 TB but only 2.00 TB are available." WHY?
My internal drive is using 1.75gb of 2tb. Time Capsule is 4th gen 2tb, firmware up to date.
2nd Question - can the WAN and/or wifi ports be easily replaced if they are faulty on another Time Capsule?

pride_1998 wrote:
My iMac has a 2tb internal drive.
I got a 4th gen 2tb Time Capsule to back it up.
Sorry, but that's too small.
Since Time Machine keeps copies of things that have been changed or deleted, it needs much more space than the data it's backing-up. See Time Machine - Frequently Asked Question #1.
Your options are not good. You can connect a larger USB drive and back up to that instead, but I'm not sure how large a drive the TC can handle. It would probably need a powered hub, as the USB port is underpowered.
Or, you could use a different backup app. CarbonCopyCloner and ChronoSync might be workable alteratives.
Problem is I get this message - "This backup is too large for the backup disk. The backup requires 2.10 TB but only 2.00 TB are available." WHY?
It adds "padding" in case the initial estimate is too low, and for workspace on the destination.

This backup is too large for the backup volume - ridiculous backup size

I have had big problems with Time Machine today. I have been successfully using it for 2 months now. I have about 30Gb spare on my iMac hard drive (out of 233Gb) and my Time Machine uses 195Gb out of 466Gb available.
However, today I have lost all my Time Machine history except for one backup made this morning, and I am now getting an error message saying:
"Time Machine Error
This backup is too large for the backup volume. The backup requires 161061280.0 GB but only 270.4 GB are available.
To select a larger volume, or make backup smaller by excluding files, open System Preferences and choose Time Machine"
Clearly the required backup volume is wrong - that's 161,000.0TB!!!
The same message has come up 3 times now.
Can anyone help/advise on what to do next?

Thanks Peggy,
I re-indexed Spotlight and ran Time Machine again, but got exactly the same error message and the same massive storage required.
I've opened Console as you suggested and these are a set of the messages from one back-up attempt yesterday (Console doesn' show anything earlier than 17.32 yesterday - but the problem started earlier than that I believe):
"16/01/2008 17:32:52 /System/Library/CoreServices/backupd[326] Backup requested by automatic scheduler
16/01/2008 17:32:52 /System/Library/CoreServices/backupd[326] Starting standard backup
16/01/2008 17:32:52 /System/Library/CoreServices/backupd[326] Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
16/01/2008 17:32:53 /System/Library/CoreServices/backupd[326] Event store UUIDs don't match for volume iMac Hard Drive
16/01/2008 17:32:53 /System/Library/CoreServices/backupd[326] Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
16/01/2008 17:44:48 /System/Library/CoreServices/backupd[326] Starting pre-backup thinning: 157286.40 TB requested (including padding), 270.35 GB available
16/01/2008 17:44:48 /System/Library/CoreServices/backupd[326] No expired backups exist - deleting oldest backups to make room
16/01/2008 17:44:48 /System/Library/CoreServices/backupd[326] Error: backup disk is full - all 0 possible backups were removed, but space is still needed.
16/01/2008 17:44:48 /System/Library/CoreServices/backupd[326] Backup Failed: unable to free 157286.40 TB needed space
16/01/2008 17:44:49 /System/Library/CoreServices/backupd[326] Backup failed with error: Not enough available disk space on the target volume."

Message too large for this organization.

Similar Messages

Maybe you are looking for