Message Tool and HDR mode IOS 5 Fails

When We are under Message tool and try to take a picture the HDR mode does not work.

- Have you tried to restore on another computer:
- You said: "but i know it isn't the USB that has been disconnected it's the Verifying Apple restore that Fails" How do you know that it is nt a USB problem? Have you tried everthing in
http://support.apple.com/kb/TS3694#error1601
Which I copoed below.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Similar Messages

  • TS4006 What can you do if you sent a message, alert and lock mode already on your lost ipod but it doesn't recieve????

    What can you do if you sent a message, alert and lock mode already on your lost ipod but it doesn't recieve???? What else can I do??? I already reported it and also have the find my iPhone app. Anyways how do the police locate an iPod and does warranty cover a lost ipod or can it replace it????

    You would have to ask the Police how they can find your iPod, if it's even possible.  Your warranty with Apple covers defects in materials and workmanship, not loss.

  • HT1349 I have tried repeatedly to update from iTunes 10.2.1.1 to 10.6.3. Everytime it fails and says to go to Tools and Download manually - then that fails.  HELP!

    I tried repeatedly to update my iTunes from 10.2.1.1. to 10.6.3 and it always fails and tells me to go to Tools:Download Manually. This also fails. Help!
    I ultimately want to update my iPhone4 to the lastest IOS and it says that I first have to update iTunes. I am stuck.

    You might want to try uninstalling iTunes and all of its components first by following this guide exactly: http://support.apple.com/kb/HT1923, then try installing the latest version of iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • No map showing in the map app in standard view just arrows,distance and directions on grid okey in hybrid and satellite modes, ios 8 installed just the grid

    Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Every time I try and burn a music CD from the songs in my library I get an error message (-3) and it says the disc failed to burn.  Why?

    I am trying to burn a CD from some of the tunes in my library.  I successfully burned 3 CDs from my playlist.  However, I am trying to finish up and burn the rest of my playlist, but when I insert a blank CD it says it's canceling the burn and says it failed, error message (-3).  Can anyone help?  I have already tried to restart my computer but to no avail.

    Hello Netsclark
    Check out the first article below for some general troubleshooting options for issues with burn a disk in iTunes. Also check the settings and try a slower burn speed, as that can be helpful.
    iTunes 11 for Mac: If you have trouble burning a disc
    http://support.apple.com/kb/PH12149
    iTunes 11 for Mac: Burn Settings
    http://support.apple.com/kb/PH12271
    Regards,
    -Norm G.

  • Photos fail to print after editing with clone stamp tool and layers

    After editing using the clone stamp tool and using layers the photos fail to print.  I even tried a simple crop edit and the photo failed to print.
    Photos print without editing.

    Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
    I tried printing from Organizer and editor and I have the image saved on my desktop
    I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
    I have left it sit overnight but it never produced a photo.
    The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, why not 3G ?

    When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.

    The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
    Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
    Try turning off your firewall and anti virus software while you try to download the iOS update.

  • I set up a hotmail account and I got a message stating "the connection to the server failed" what do I need to do to get my email working.

    I set up a hotmail account and I got a message stating "the connection to the server failed" what do I need to do to get my email working

    Do you have a good wifi connection?
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • Hi was told that there was an update for itunes yesterday, when to update and this kept failing, was prompted to uninstall itunes and reinstall this continues to fail message coming up says Apple Mobile device failed to start insufficient  previlieges

    Hi yesterday I was prompted to a update to itunes this I tried to do without success failing a number of times. After this I was prompted to unistall itunes and re install this now continues to fail with a message error something like Apple Mobile Devices Failed to start not enough previlieges. Please help is this a Apple issue Iv'e never had any problems before.

    I had this same problem this morning. When I tried to run ITunes after the failed upgrade I got a "msvcr80.dll is missing" driver error.
    Following the instructions in step 1 of this link:
    http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
    got the latest version of ITunes up and running for me.
    The only thing that didn't quite work like the instructions said was I couldn't get the Apple Mobile Device Support to uninstall. The uninstall ran and said it was successful, but it was never removed from my list of installed programs. Even w/ that, the full re-install fixed the issue.

  • I have 2 ipad 2s.  On the newer one I can log in and update to IOS 5 with no problem.  On the older one I get the message "Your Apple ID has been disabled."  Why does it work on one ipad and not on the other?

    I have 2 ipad 2s.  On the newer one I could log in and update to IOS 5 withno problem.  On the older one I get the message "Your Apple ID has been disabled." No other explanation.  Why can I log in on one ipad and I'm disabled on the other?

    Well, I spoke too soon.  Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads.  Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other.  I'm getting more confused by the minute.

  • Problem with home button and "messages" app after upgrade to iOS 4.1

    Hello,
    I have noticed two interesting problems with my iPhone 4. I am not sure if it is in conjunction with the upgrade to the iOS 4.1 software, but I did not notice the problem prior to this. Both of these problems are very odd and are hit or miss. I have tried restoring and the problem is still present. Also, since both problems have presented at the same time, that is why I am starting to believe it is not hardware...
    Problem 1: The home button has become considerably unresponsive. This is not all the time, but it does happen a lot. Sometimes it won't work for about 5-8 clicks and I have to use the power button to access the phone.
    Problem 2: When composing a new text message the cursor would always default into the "To:" section of the app which allows you to easily type what contact you are trying to message. However, I am having the issue now occasionally when I am in the messages app and select to compose a new text message that the cursor now defaults into the chat box (where you type your actual message). This is very annoying and I know that this is not the intended behavior of this.
    Please let me know if anyone has experienced similar issues and can provide me with some feedback.

    I have not experienced the same.
    I have tried restoring and the problem is still present.
    You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
    If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
    Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

  • How do I enlarge the font in messages received and sent?  I have it set at "13", but it is very, very small on my screen.  I can't seem to change the appearance of the tool bar even when I try to "customize".

    How do I enlarge the font in messages received and sent?  I have the font set at "13", but the appearance on my screen is very, very small.  When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so.  Please advise.  Thank you.

    Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
    I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
    Thanks for your help!

Maybe you are looking for