Message Tracking Results

Hello,
I have a email enabled "Universal" security group called "AllStaff" that has over 2000 members. When I use the command:
get-messagetrackinglog -ResultSize Unlimited -Recipients:[email protected] -Server "MailServer"
-Message ID "<[email protected]m>" | % {$_.recipients} | out-file c:\mps\recips.txt
This will only return the first 1000 members of the group... Is there a way to get a listing of all the members as we believe that not all of them are receiving emails and I want to verify this.
So to be clear, the email is only being sent "BCC" to the allstaff email enabled security group!
TIA
Steve

OK I found the right search to use...
get-messagetrackinglog -Sender "SenderEmailAddress" -Server "CASServer" -EventID "DELIVER" -MessageSubject "Subject of Message" -Start "12/3/2013 5:00:00 AM" -End "12/3/2013 7:10:00 PM
This returned the 2000 plus recipients I was looking for!

Similar Messages

Message tracking max results returned

Hi All,
On message tracking page the predefined max rsults returned value only have 3 options 250, 500 and 1000. May i know how can i increase query setting more than 1000 results return.
Regards,
Rock

Hi Rock,
You cannot increase the query to more than 1000, but you can change your other parameters. For example, you could change the date scope until you get down to under 1000 results.
You will have to run multiple queries to pull all the data you're looking for, but unless/until they change the maximum results this will give you a workaround.
Thanks,
Rachel

Message tracking

current scenario exchange 2013 on premise.
our requirement is track the messages send from external domains (from internet)
We are using get-messagetrackinglog command and pipe it to test file.
below is command i am using
get-messagetrackinglog -sender "[email protected]" | fl > d:\user.txt
we not getting any output in the file.
please suggest

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
1. Please check if you can see the message tracking log on the following folder:
C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\Logs\MessageTracking
2. If no, please restart the Microsoft Exchange Transport Log Search service and check the result.
What's more, here is a thread for your reference:
No Results for message tracking (Note: Though it is Exchange 2010, it is also useful in this issue)
http://social.technet.microsoft.com/Forums/exchange/en-US/8a9906e8-4d6a-4db6-b58e-1fee43dec4ce/no-results-for-message-tracking?forum=exchangesvradminlegacy
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Message Tracking Question

We installed a C150 in our office and we enabled Message tracking on the day we installed the device. However when we try to find messages all the way back to October (the 13th, the day we installed it) there were no results found. At the top of the message tracking page we have this:
Available Time Range: 13 Oct 2008 15:04 to 23 Dec 2008 12:50 (GMT -0500)
Data in time range: 99.98% complete
Is there any way we can track messages back that far?
I do have a support case open, but I wanted to see if anyone else has that issue.

The following article is in the knowledge base:
Earliest 15% of Tracking Data Is Not Currently Available for Querying
Question
Why does the "Available Time Range" appear to be missing the oldest data?
Answer
This is a known centralized message tracking issue in which the earliest 15% of tracking data is not currently available for querying. However, the appliance retains the data, and the data will be available for querying after this issue has been resolved.
A future release will provide access to 100% of the time range in the tracker database.
This is Defect ID 39471.
Hope this will explain your problems (the only way to find the missing part is via the CLI-find/grep command).
Peter

Ironport Message Tracking Logs

Hi,
Am unable to post this in the Ironport Security section due to the restricted access on my Cisco support login ID.
I need to export the message tracking logs for a particular user for the last one year (or the period for which logs are available) on Ironport M660.
The GUI only reports 250 search results for every search and I have approx to export logs for approx. 20,000 messages.
Is there a Unix/CLI command which can be executed to export all tracking logs between a time frame in Ironport?
Thanks.

This was a defect covered in the 8.5.6-093 release:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_HP1_Release_Notes.pdf
So, if running the -074 revision... found defect:
https://tools.cisco.com/bugsearch/bug/CSCuq49620
I wouldn't say that running repengupdate force is not suppose to be done, aside from a formal request... is odd to see or hear that would have been mentioned. With the force updates for any of the processes on the ESA, this is usually always a good troubleshooting step for any customer --- as the process will instantly call out to the updater servers, compare manifests, and then pull regardless of what is running the latest engine and rules sets for the process... and then silently implement in the background. While for the customers who might have bandwidth limiting options running on their network, the only major side effect is the package size that is coming across... since the engine is tagged into the rules...
But, normally with antivirus and antispam - this is the most helpful to run antivirusupdate force or antispamupdate ironport force. Especially in times where the update process itself may have been interrupted with a network related hiccup or staled out download.
-Robert

DLP messaging tracking - build 7.1.2-020

I have had DLP running in passive mode now for about a week and think I may have either found a bug or am missing something and it is a limitation for a reason.
While in message tracking, if I leave all fields blank, only change the time range to past week. Then I select advance, and check off DLP violations. In
the DLP violations if I choose a known DLP template, say Payment Card Industry Data Security Standard (PCI-DSS) and then click search I get no results,
when in fact the DLP incidents summary page shows me 6 in the same time range. Also, if I do not choose a policy to query and I only check the DLP violations check box, I do get results on ALL violations as expected. My build is 7.1.2-020. Can someone else on the same build test their box if running DLP?
Thanks,
Chris

Chris,
I think this is a good candidate for a ticket with Customer Support. Not sure if this is a defect or not but due to the nature of DLP and the senario your describing we would probably need to go over this in more detail over the phone, and possible get access to the appliance via remote access.
Christopher C Smith
CSE
Cisco IronPort Customer Support

Export message trace results in EOP?

We are using EOP and if I run a message trace for the last hour or so, I can only seem to view the results in the browser. I do not see an option to save this report, only if it is older than 7 days. Is this possible?

Hello,
there is one way of getting this information.
connecting EOP using Powershell from your system and use message trace to get the logs.
Hope the following like useful for this,
http://www.msexchange.org/kbase/ExchangeServerTips/MicrosoftOffice365/ExchangeOnline/retrieve-message-tracking-logs-exchange-online-and-eop.html
Thanks and Regards,
Dhandapani.

Problem receiving from sender, showing in SmtpReceive log but not Message Tracking

Our Exchange 2007 server (SBS2k8 really) has had problems receiving mail from a certain sender the last few weeks. With the SMTPReceive set to verbose, I can see the mail coming in but it never shows up in the message tracking logs.
Looking at similar issues, I thought maybe the content filtering agent might have been grabbing it, so I set up a transport rule to take any mail from this particular domain and set the SCL to 0 as well as bcc a copy of it to myself. But I just noticed
another entry in yesterday's smtpreceive log and that didn't do the trick (or forward a copy to me for that matter).
I'm including some samples from our SMTP log. I can see that when it works, after the 354 Start mail input line, our server sends a 250 2.6.0 code confirming the message has been queued for delivery, at which point the remote server sends a QUIT and
we close it. But when it fails, there's nothing after the 354 line.
Example of good transmission:
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,0,10.0.100.3:25,50.xxx.xxx.xxx:9100,+,,
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,1,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-23T15:00:49.636Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,2,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Wed, 23 Apr 2014 11:00:49 -0400",
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,3,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,EHLO other.domain.com,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,4,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,5,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-SIZE 26091520,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,6,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-PIPELINING,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,7,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-DSN,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,8,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-ENHANCEDSTATUSCODES,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,9,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-STARTTLS,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,10,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-AUTH,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,11,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-8BITMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,12,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250-BINARYMIME,
2014-04-23T15:00:49.948Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,13,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 CHUNKING,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,14,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,MAIL FROM:<[email protected]> SIZE=3497,
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,15,10.0.100.3:25,50.xxx.xxx.xxx:9100,*,08D11000FE2BD02F;2014-04-23T15:00:49.620Z;1,receiving message
2014-04-23T15:00:50.026Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,16,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.0 Sender OK,
2014-04-23T15:00:50.073Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,17,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,RCPT TO:<[email protected]>,
2014-04-23T15:00:50.291Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,18,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.1.5 Recipient OK,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,19,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,DATA,
2014-04-23T15:00:50.338Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,20,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-23T15:00:50.525Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,21,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,250 2.6.0 <[email protected]> Queued mail for delivery,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,22,10.0.100.3:25,50.xxx.xxx.xxx:9100,<,QUIT,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,23,10.0.100.3:25,50.xxx.xxx.xxx:9100,>,221 2.0.0 Service closing transmission channel,
2014-04-23T15:00:50.556Z,SBS2k8srv\SBS Receive,08D11000FE2BD02F,24,10.0.100.3:25,50.xxx.xxx.xxx:9100,-,,Local
and an example of the message not being successfully received:
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,0,10.0.100.3:25,50.xxx.xxx.xxx:10131,+,,
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,1,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,SMTPSubmit SMTPAcceptAnySender AcceptRoutingHeaders,Set Session Permissions
2014-04-24T11:57:37.236Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,2,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,"220 xxx.xxx.com Microsoft ESMTP MAIL Service ready at Thu, 24 Apr 2014 07:57:36 -0400",
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,3,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,EHLO other.domain.com,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,4,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-xxx.xxx.com Hello [50.xxx.xxx.xxx],
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,5,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-SIZE 26091520,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,6,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-PIPELINING,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,7,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-DSN,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,8,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-ENHANCEDSTATUSCODES,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,9,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-STARTTLS,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,10,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-AUTH,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,11,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-8BITMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,12,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250-BINARYMIME,
2014-04-24T11:57:37.532Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,13,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 CHUNKING,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,14,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,MAIL FROM:<[email protected]> SIZE=3481,
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,15,10.0.100.3:25,50.xxx.xxx.xxx:10131,*,08D11000FE2BD40D;2014-04-24T11:57:37.220Z;1,receiving message
2014-04-24T11:57:37.579Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,16,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.0 Sender OK,
2014-04-24T11:57:37.610Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,17,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,RCPT TO:<[email protected]>,
2014-04-24T11:57:37.719Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,18,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,250 2.1.5 Recipient OK,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,19,10.0.100.3:25,50.xxx.xxx.xxx:10131,<,DATA,
2014-04-24T11:57:37.750Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,20,10.0.100.3:25,50.xxx.xxx.xxx:10131,>,354 Start mail input; end with <CRLF>.<CRLF>,
2014-04-24T11:57:37.875Z,SBS2k8srv\SBS Receive,08D11000FE2BD40D,21,10.0.100.3:25,50.xxx.xxx.xxx:10131,-,,Remote
Interestingly, we used to receive email from this sender in the past. When it stopped working, it didn't quite stop working outright - at some point after the deliveries stopped, 2 made it in, but nothing again since then.

Check the agent logs on the machine. The Exchange anti-spam agents log files are found here:
C:\Program Files\Microsoft\Exchange Server\TransportRoles\Logs\AgentLog
If you use Forefront, its agent log files are usually here:
C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\FSEAgentLog
Other software may have its log files elsewhere.
--- Rich Matheisen MCSE&I, Exchange MVP

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Multiple Partners for the same customer in Message tracking of SEEBURGER

Hi,
This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
12345_INVOIC02
34567_INVOIC02
45678_INVOIC02

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match.

Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match. Can anyone help me with this? What file is missing and from where?

This is a known problem with Windows 7 Enterprise using certain Group Policy settings. Solution for me was to use another machine running Windows 7 Ultimate.

How to populate the Sender and Receiver GLN/ID in the Seeburger Message Tracking

HI Team,
Scenario :
ECC--> PI--> Party
Sending GS1 XML Message to party (Not EDI). Sender Party and Receiver Party appearing as expected.
BUT User expecting to see the Sender GLN and Receiver GLN in Seeburger Message Tracking.
It should be dynamically picked form GS1 Message. Should Appear in RED BOXES Shown below.What Module Parameters Should be used for this.
I have Tried destTargetMsg and destSourceMsg. But did'nt work.
can anyone please Help

Hi Veman
You are correct. For XML to XML, you do not need BIC module.
However, since you are not using BIC module, you will not be able to enrich the metadata using the archiveXI parameter during processing at the adapter framework.
Another place to enrich the metadata would be during message mapping. You can call a custom UDF to populate the metadata and create an entry in Seeburger Message Tracking.
Please refer to the Seeburger manual for Message Tracking Function for more details on how to create the UDF.
Rgds
Eng Swee

Seeburger Message Tracking

Hi,
Can anyone please tell us how to use seeburger message tracking.
I understand that there are 3 steps to be done.
1. Mapping in IR should have a UDF which referrers to the standard Seeburger function jar files.
2. Module configuration in the channel with FileStore module.
3. Configuration in Message Tracking.
But need some details about each step.
Could anyone please provide a document which explains this configuration.
Thanks in advance
Jagruthi

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

Multi mapping & seeburger Message Tracking (Filestore module)

Hello,
For the people who knows seeburger archiving...
Anybody make the scenario using multi mapping (split in the receiver) with message Tracking seeburger (File Store module in the Receiver Channel)?

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

Exchange Server 2010 - Message Tracking Logs - Log file creation

Hi,
I would like to find out on the behavior of the exchange server in the way that it logs the message tracking.
Currently the parameter used is
MessageTrackingLogMaxDirectorySize - 10GBMessageTrackingLogMaxAge - 30daysI would like to check when the Max Directory Size has exceeded the value indicated, does Exchange server immediately deletes the oldest log file to make space for the new logs?And in the event that the oldest file is being open or locked, will exchange server delete the next oldest file? or it will reattempt to delete the "locked" file for a period of time?Lastly, when these "oldest" files is not able to be deleted, will exchange server stops logging new tracking events?Thanks!

Hi Zack,
Thank you for your question.
If you have configured the parameter of “MessageTrackingLogMaxDirectorySize” and “MessageTrackingLogMaxAge”, we think you have enable circular logging, it will delete the oldest message tracking log files for new log file when the either of the following
conditions is true:
The message tracking log directory reaches its specified maximum size.
A message tracking log file reaches its specified maximum age.
In addition, it didn’t exceeded the value indicated.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Message Tracking Results

Similar Messages

Maybe you are looking for