Message Transferred to Business Service, but acknowledgement not possible

I have an IDoc to Flat File scenario. Flat file communication channel is in a Receiver Agreement for a Business Service.
The message posts fine, but in the acknowledgement there is the familiar problem:
"Unable to convert the sender service BSE_XXXX to an ALE logical system"
I have checked that the Business System has an associated Logical System, and that the Header of the Receiver Agreement has the Sender Service and Receiver Service fields populated. Still I get this problem.
Any suggestions?
BR,
Tony.

hi,
u cant send acknowledgement through the file adapter.
if u r using bpm then only u can do it
plz rewards points
vikas

Similar Messages

Removing Message Interface From Business Service

Hi Experts,
I want to remove one message interface from the Business Service.But, am not able to do so from ID.
Can anyone tell me how can this be done?
Thanks,
Sushama

hi,
>>>Business Service.But, am not able to do so from ID.
if you're talking about business service (not business system)
then just select the message interface and press the minus sign
that's all
if this is not possible you may not have sufficient authorization
Regards,
Michal Krawczyk

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

SXMB_MONI - weird message "Acknowledgement not possible"

Hi All,
I Am working on an async scenario of:
ERP -> IDOC -> XI -> PlainHTTP -> 3RDPARTY
I have now got the original message doing all that I want it to, I create it in the ERP system, it goes through XI and ends up at the right place. But I had a few problems with Acknowledgements. First off I had the seemingly infamous "Unable to convert the sender service to an ALE logical system" error, but by searching through the forum and some useful weblogs (thanks Michal..) was able to sort this out (still find it far from obvious that a 3rd party system needs an LS..).
And now my ALE Ack is (seemingly) successfully going back into my ERP system and if I look with Transaction WE05 it says it was processed successfully (code 53, using process code AUD1), plus in the RWB the acknowledgement is shown as having been processed successfully, but SXMB_MONI still shows the icon and message "Acknowledgement not possible" in the list of XML messages, although when I look at the details there are no errors... it is weird and I am tempted to ignore it as it does not seem to be causing any issues but I would love to know why it still displays this message.. any ideas?
Many thanks,
Chris

Hey,
Thanks Udo, I kind of suspected that it was ignorable but it is always nice to see only green lights and clean messages in RWB... So I will move on.. but am still a little confused though, as to what it means to say that acknowledgements are not supported? I can see that an acknowledgment is being created, sent and accepted back into the Sender system (which suggests a certain level of support for acknowledgements..)
So does that mean there are further acks that could/should be sent but are not supported? The acknowledgment documentation I have found does not seem clear on this. Perhaps I am getting the Ack from the IS but not from the plain Http adapter??
Many thanks for your help,
Chris

I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

Download a fresh Firefox copy and save the file to the desktop.
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
*http://kb.mozillazine.org/Recovering_a_missing_profile

I getthe message Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I onlly have one computer

I installed FF on my new computer, Windows 7 Toshiba, I get the message''' Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system'''. It is NOT open I only have one computer.
I had a computer expert try everything and we cannot get it to open.

Look for the firefox process firefox.exe and kill it with for instance task manager. it is also worth watching for plugincontainer.exe.
The problem and solutions are explained in the articles:
* [[firefox is already running but is not responding]]
*[[firefox hangs]]

Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't o

Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't opened any additional Firefox related programs, and previous Firefox is closed. First I though it is because of my computer, but then I discovered that other people have the same problem as well
== This happened ==
A few times a week
== some 2 month ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729)

Hi Andis.
First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
https://addons.mozilla.org/en-US/firefox/addon/3559/
Hopefully this will help.

Why does firefox stop loading then when i close it and try to open it up again I keep getting this message:Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system

Firefox will just stop loading/ connecting to the internet. The gray circle will just continually move but it never turns green to load the pages. I know it's not my internet because my internet explorer works just fine while this is happening to firefox. So I close firefox and then try to re open it but I get the message: Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. So I wait a little bit then try and re open it and still get the same message. I then go into my windows task manager and try and end the firefox proccess but it won't end. So I restart my computer and firefox eventually starts acting up again.

For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

When logging in to Icloud I get the message 'Apple ID' is valid but is not an Icloud Account. I have changed passord but still get the same message.

I have just set up Icloud and backed up files to it. I have not been able to log in. I get the message 'Apple ID is valid but is not an Icloud account. I have the same User ID for Icloud and Apple but different passwords. Neither combinations work. I have reset passwords twice but get the same result.

You cannot set up an iCloud account on Windows - is that where you tried to do it? The error message you quote is what happens when, having an Apple ID, you attempt to use it on Windows to create an iCloud account. You can create an iCloud account on a Mac or an iOS device, then you can sign into it in the Windows Control Panel. None of this should have any effect in the iTunes Store (the forum for which is where you have posted).

Error message "Firefox is already running but is not responding" - I have read and action the KB - no fix

So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and does not resolve the overall issue.
I have also uninstalled and reinstalled the application.
So why do I get the Error message "Firefox is already running but is not responding"?

See also:
*http://kb.mozillazine.org/Profile_in_use
Note that in Firefox 13+ (expected to be released June 5) the parent.lock file is no longer deleted after closing Firefox to make it possible to check for startup crashes, so the presence of that file will in the future no longer indicate a problem.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Acknowledgement not possible though the message was sent successfully

Hello Everyone,
I have the following scenario below.
Sender = R/3
Interface = IDoc - stored procedure
Receiver = JDBC Adapter
I need 2 kind of acknowledgements.
1. If the message got an mapping error in XI/PI we need to send "any kind of ack" back to the R/3 to inform the Team that something happens during the mapping.
I do get a ALEAUD success message when a IDOC is sent to PI .
2. If everything is ok and the message was sent to the MSSQL- I gett an error like "Acknowledgement not possible". AnywayIi don´t need a ack if mapping in XI/PI is successful as it is a asynchronous scenario.
I think it is trying to send back an ack because i have a receiver IDOC channel defined for the R/3 receiver.
How can I get rid of this Acknowledgement not possible information ?
Thank you ,
Teresa

chk this:
1) http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
2) To suppress ack maintain the entries in table IDXNOALE (DO not request ack)

HT5372 i have tried sending message to lock my iPhone but it not working

i have tried sending message to lock my iPhone but it not working. what should i do to be able to make this work well for me.

Have you lost the iPhone, or are you just testing this feature?
If the device is offline it will not be able to recieve the remote lock request.
There is not much you can do if this is the case.

I always get the message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." on terying to run firefox

When I try to run Firefox I get the message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
No copy of firefox is running as far as I can tell. Restart and restoring system to 10 days ago did not help.
Uninstalling and downloading a new copy - but to not avail.

See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
Do you still have a default profile?<br />
If not then delete the file [http://kb.mozillazine.org/profiles.ini_file profiles.ini] to make Firefox create a new default profile.
* C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\

Keep getting this message"Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." , but cannot view Firefox open window or close it. Have to always reboot system.

Keep getting this message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, cannot view open window or close Firefox. Have to always reboot system to access the internet.

For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

I have an AirPrint printer and am signed up for the wifi 3G service but will not have wifi. Can an IPad be hooked to a printer with a cable, or can I print somehow without wifi?

I have a new air print-capable printer and am signed up to Verizon wifi+3G service but will not have wifi while traveling. Is there anyway to print from my iPad in this situation? Cannot the IPad be hooked up to a printer with a cable? If not, this seems to me to be a real shortcoming with an iPad!

iPads cannot be connected to a printer using a cable.
You need some form of Wi-Fi network to print. You do not need to have that Wi-Fi network connected to the internet. There are some devices that will create a Wi-Fi network and allow you to print. Google it to find someplace ossicle solutions.

Message Transferred to Business Service, but acknowledgement not possible

Similar Messages

Maybe you are looking for