Message type and Process Code for 940 IDoc

Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.

should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar.

Similar Messages

  • Idoc type, message type and process code for EDI 940 & 945

    Hi,
    We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
    Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
    Thanks in advance for the help.
    Regards,
    Gajendra

    Hi Gajendra,
    For EDI940, you can use message type SHPORD or WHSORD,  IDOC type DELVRY01 and process code DELV.
    For EDI945, you can use message type SHPCON or WHSCON,  IDoc type DELVRY01 and process code DELV.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Idoc Message type and Process Cosde for CJ01 transaction

    Hi,
    What is the Idoc message type and inbound Process code for CJ01 transdaction?
    Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
    Thanks.

    Hi,
    All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
    Go to se93 and search for BD* and look for the description.
    Regards,
    Nilesh.

  • What Message type and Process Code to use for Purchase Order Change in 4.6C

    I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
    I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
    I can not imagine this functionality does not exist in 4.6C.
    Any suggestions for my problem are welcome.

    Hello,
    In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
    Function module    BAPI_IDOC_INPUT1
    Idoc Type              PORDCH01
    Message Type      PORDCH
    So check carefully the following OSS notes:
      [Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
    [ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
    Regards,
    Andrea
    Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

  • Urgent information required regarding message type and process code

    Hi All
    We am working on EDI895 transaction (Delivery/Return acknowledgment) and we are using TXTRAW01 Idoc type for the mapping. Can anyone please let me know what the message type and the process code for the IDoc type is???
    thanks

    Hi,
    Welcome to SDN.
    Please go to transaction WE64 to find out all process codes available for IDoc type TXTRAW01 with message type TXTRAW.
    There are four process codes for message type TXTRAW.
    - ED00
    - ED00_XML
    - ED08
    - TXT1
    Regards,
    Ferry Lianto

  • Message type, Idoc type and process code in ALE/Idoc

    Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
    Whether Message type triggers the process code or the Idoctype/idoc  triggers the process code in Inbound process?
    regards
    Message was edited by: henry

    Hi Henry,
    About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
    In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
    You can use any one these to serve your purpose.
    e.g. you can assign
    -process code P1 to message type M with Message code 1
    -process code P2 to message type M with Message code 2
    Further these process types can be configured to call separate FMs.
    Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
    I hope it's clear & correct
    Thanks,
    Ram

  • Bind message type and process code

    Hi everyone,
    I want to bind one message type with two procee code,How can I do this?Thanks in advance!
    Best Regars,
    Yu

    Hi ,
          goto to transaction we41 if outbound process code ,go to respective process code or create ur own process code and add message type .
    goto to transaction we42 if inbound process code ,go to respective process code or create ur own process code and add message type .
    But when you add this message type in the partner profile or distribution model then i think it will give an option.
    Please reward if useful.

  • Process Code for Outbound Idoc

    Hi All,
    We need to find out the Process Code for an Idoc.
    Note : We dont have access to WE41, WE20 ,BD51.
    Could you please suggest any alternatives.
    Thanks,
    Sanjeet

    Hi Gautham,
    Thanks for ur reply.
    But still we hv not *** to the solution.
    We have available information as following:
    Basic Type : DESADV01
    Extension Type : EXTDES03
    Message type : DESADV
    Partner NUmber : XXXXXX
    Partner Type : KU
    I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
    Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
    So if we get the process code, we can reach to FM.
    Thanks,
    Sanjeet

  • Process code for Outbound IDOC type MBGMCR03

    Hi Friends,
    I have a requirement,  where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
    Thanks in Advance,
    Meghna.

    Hi,
    Goods Movement is genarally inbound.
    You may have to write your own process code for MBGMCR03.
    Regards,
    Shakthi.

  • Process code for inbound idoc's

    hi  friend,
    i want to create a zprocess code for inbound idoc's pls i want to step or code.
    regrads and thanks

    Hi
    Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
    1.Maintain Partner Profile(we20) which is the sender system are you using ?
    2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
    3.If you trigger by workflow than you have to use Message Variant .
                     If you are ok or incase do face any issues please do reply to the forum.
    Regards
    Somnath

  • Process code for extended idoc

    Hi,
    If we are creating an extended idoc, do we have to assign a new process code to it ?
    Or will the process code and the associated function module for the basic type work as well for the extended idoc ?

    Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
    Process Code is a different name for specific purposes like function module. IDocs are written in this process.
    Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc Interface. The process code names the relevant function module
    Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm
    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    Click on Create new and enter a description and press enter.
    Click on ZIDOCTYPE01 and then on the Create icon.
    Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    Enter a description for your segment type and create.
    Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    Save and generate, press back
    To release the segment choose Goto, Release from the menu.
    Check the box on the line of your segment.
    Save, back and enter.
    Your Idoc type structure should be displayed with your new segment.
    Save and back.
    To release the Idoc type choose Extras, Release type from the menu and Yes.
    Reward points if useful.

  • Need elp to create the process code for inbound idoc !

    When I am creating a process code in WE42 and associating a
    function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?

    Hi,
    Use transaction BD51 to make the FM known as an inbound FM.
    Regards,
    John.

  • IdocType, Message Type & Process code for Payroll Posting

    Hi Gurus,
    In My Project, the SAP HCM is Maintained as a separate instance and rest such as FI/CO resides in ECC ERP. Now We need to Interface the HCM Instance with ECC ERP, where FI/CO resides to post Payroll Results. Hence I am writing a Technical Specs for ALE interface between SAP HCM and ECC ERP. I came to know that a standard ALE is existing for this purpose and I hereby need its Idoc type, Message Type and Process code for the same.
    Thanks in advance.
    Regards
    Vinoth Kumar.R

    Guys
    I could not use above message type/idoc type as they are not released in SAP.
      So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
    Regards
    Srikanth M

  • Specific process code for Production order message type LOIPRO

    Hello,
    Is there any specific process code for Production order message type LOIPRO.
    Request you to reply.
    Thanks
    Prashanth

    Hi Prashanth,
    sorry for last thread ... that not contain full information ...
    For message type LOIPRO you can use process code APLI.
    In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff..  http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
    Regards,
    Amit

  • Suitable process code for asn

    I have to process inbound ASN for updating the Order confirmation tab. I am using SHPMNT05. Can anyone tell me the corresponding message type and process code in order to update the confirmation details using Inbound ASN ?
    Thanks in advance

    hi ,
        SHPM  ....> this is the process code u have to use
    SHPADV  ...> this is the message type u need to use
    reward points if helpful...

Maybe you are looking for