Message type control for movement type

Hi All,
We are using two movment types,
301 - Plant to plant transfer
934- initial stock entry reversal(custom one).
Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
Regards,
Babs

Dear ,
Because u already book for sales orders so release the sales orders you can do, or increase the stock and u can use .
regards
shiv

Similar Messages

Field selection for movement type 601 account 894025 differs for cutomer

While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
Rajiv

Hi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv

Movement type 122 Error while GI" Update control of movement type is incorr

Hai Gurus,
I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
warm regards.
mahesh.

Hi
Mov type 122 is return to vendor if the qualtiy of Goods is Poor / Quality
Regatds
AKM

Field Seletion for movement type / acct differes for BA

dear all
while posting in MM the user is facing the problem and error message
Field Seletion for movement type / acct differes for BA
please let me know if i can do some thing with Field status variant in FI
I am not able to figure this out

If you Run Program RM07CUFA in SE38 and compare movement type and GL you can see the
comparison of the field status variant of the movement type and GL
Hope this will resolve your issue
Bilal

Update control of movement type is inco.

Hi All,
When user is Doing Good Receipts in Purchase orders & when it comes up he gets this message: (Update control of movement type is incorrect (entry 101 _ _ _ B)
Any help is appreciated.
Thanks & Regards,
S.Sinigh

Hi,
Please check the below thred .I think issue is with the OMS2
Update control of movement type is incorrect (entry 101 _ X _ B)
AMIT

Update control of movement type is incorrect

while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
ERROR IS "update control of movement type is incorrect entry (101 X X e b _ v)
the performance assist screen shows this
Update control of movement type is incorrect (entry 101 X X E B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 X X E B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi
Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
also consult your MM consultant for this error
Regards
Anupam Sharma

Update control of movement type incorrect (entry Z31 X X _ L )

Hi gurus,
Business reporting requirment to used M T 301, currently we using MT641 fr plant to plnt (stock in transit) transfer .
now we have to replace 641.
i)Kindly advice???
I have create Z31 copy of MT 301 but shown below error at PGI.
ii)Update control of movement type incorrect (entry Z31 X X _ L )
Error Message No E M7 226
how to remove this error?
thanks in advance.
sapsd25

Hi G. LakshmipathiLaxmipati guru,
thanks for the prompt response.
T code VAL01n & VL02n is alreday.
Is their any MT similar to 301 use for stock transfer with DO & Excise
Thanks
SAPSD25

Availability Check for Mov.type

Dear All,
Can we configure Availability check for Mov.type?? If yes what are the settings to be done??
Points will be awarded!
Regards,

Hi,
Thanks a lot for the quick response. As you have mentioned I have done the above steps. Now I have doubt that actually my requirement is to activate the Dynamic Availability check for a Mov.type. So in the above transactions OMCM & OMCP in the mov type tab we have a Dynamic Availability check Column where we can set the message as Warning, Error etc..
As per your above points If I assign the check rule to my transaction code system will do Availability check when I execute the transaction irrespective of material.
So Do I have to do the above step? Or shall I assign the Checking Rule to my mov.type in OMJJ ( update Control) tab?
Kindly reply your valuable suggestions?
Regards,

Field Selection error for movement type and G/L account

I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many Thanks

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

Issue with Return Delivery for movement type 262

Hi,
I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262 does not exist" , but this has been very well maintained in the table.
Can you please let me know -
If it is possible to do a return delivery for a movement type 262?
If yes how to address the above error encountered.
Thanks in advance
Sachin

Hi Sachin,
If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
BR
Csaba

FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

Hi,
I am trying to do the Post Goods Issue (PGI).
But, the system is throwing an error as mentioned below.
Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
I made the Cost Center as Required Entry. But, there was no effect on the PGI.
I could not make out the exact error.
Please guide me properly in this regard and do the needful.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

For Movement type Enhancement

Hi All,
My requirment in Transaction code: MIGO Transfer posting, Movement type is 313
when we enter material code and plant in the supplying side in MIGO transaction it comes automatically in destination side. In case somebody changes the Material code and Plant at destination side of MIGO transaction then system should show the error message that u201C Destination Material code and Plant must be same as Supplying Material code and Plant for Mov type 313u201D. This error message will restrict the user to change the Material code and Plant at destination side in MIGO transaction.
Is it possible? if yes..please provide me the Enhancement name or user exist or Badi for this.
I have tried, but i didn't found. Please help on this.
Thank You
Srinu

Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
Thomas

Account modification key for movement type 643

Hello Experts,
I am reaching out to you today as I am in need of some info on Account assignment for Goods issue process. I looked at transaction OMWN or OMJJ for movement type based settings. I am running a business process ' Intercompany stock transfer order'. Goods issue movement on delivery reads 643(Goods issue for cross company), which is picking 'Account modification key' VAX.
My requirement was how do I force system to pick VAY for 643 without overwriting VAX with VAY in OMWN transaction. Also there are several possibilities listed out for movement 643 alone. Appreciate if you could briefly tell me how system determines other parameters such as 1) Special stock indicator 2)Consumption posting 3) Value string & 4)Counter to determine 'Account modifier' in the customizing table V_156X_KO for Intercompany movement type 643.
Additional info: Trigger is Stock tarnsfer order type NB. Subsequent process is VL10B for Delivery creation using type NLCC and Intercompany invoice(IV) for shipping the goods to ordering company code. Then in the receiving company MIGO or goods receipt with reference to outbound delivery and fianlly MIRO or Invoice verification.
Regards
SG

Valuation Structure
Data on a material is valuated using the following structure:
Valuation area
Valuation class
Valuation category
Valuation type
Material type
Movement type
Valuation Area
Organizational level at which material valuation is carried out. You can define a valuation area as
follows:
Valuation area = company code
All stocks of a particular material in this company code are valuated together.
Valuation area = one plant
The stocks of a particular material in this individual plant are valuated together. Stocks in
other plants are not included in this valuation area.
You define in Customizing the level at which valuation should take place.
Valuation Class
You group together different materials with similar properties into valuation classes so that you
do not have to manage a separate stock account for every material.
The following table contains examples of possible valuation classes:
Valuation class Description
3001 Colors
3002 Paints
3030 Operating supplies
3100 Trading goods
Which valuation class a material can be assigned to depends on the material type. You can
define the following assignments in Customizing:
All materials with the same material type are assigned to just one valuation class.
Different materials with the same material type are assigned to different valuation classes.
Materials with different material types are assigned to a single valuation class.
MM - Material Price Change (MM-IV-MP) SAP AG
Valuation Structure
10 April 2001
A material is assigned to a valuation class in the material master record. The system checks
whether the material type allows the material to be assigned to the valuation class specified.
The system refers to the valuation class of a material to determine which stock account to post to
when a posting is made for this material.
Valuation Category
Criterion according to which split valuation is carried out:
Procurement
You can valuate a material differently depending on whether it is manufactured in-house
or procured externally.
Origin
You can valuate a material differently depending on where it comes from (such as home
or abroad).
Status
You can valuate a material differently depending on its status (such as new, used,
repaired).
You define the valuation categories in Customizing. A material is assigned a valuation category
in the material master record.
Valuation Type
The valuation type specifies the individual characteristic of the valuation category, such as
internal or external, in the case of Procurement. Within the valuation category Origin, you can
define the different countries as the valuation types. You define valuation types in Customizing.
You first determine all the valid valuation types for a valuation category.
You define in the material master record which valuation types are allowed for a particular
material. For every material subject to split valuation, you must enter all the valuation types
allowed in the material master record.
Material Type
You assign every material to a material type when you create it. Examples of material types in
the standard system include raw materials, operating supplies and finished products.
The material type controls the properties of a material and which data must be maintained for the
material. The following control features are important for valuation:
Is the material managed by quantity?
Is the material managed by value?
Which price control type may be used for the material?
Which valuation class can the material be assigned to?
The system administrator can create or change material types in Customizing.
Movement Type
For every material movement, there is a movement type in the SAP System. The movement type
controls the properties of the movement, for example, which entries you must make when
SAP AG MM - Material Price Change (MM-IV-MP)
Valuation Structure
April 2001 11
entering a material movement, and which updates are carried out when the movement is posted.
The following control features are important for valuation:
Does the material movement cause the quantity to be updated?
Does the material movement cause the value to be updated?
Does the material movement lead to postings in Accounting?
Is the material movement relevant for LIFO/FIFO valuation?
The system administrator can create or change movement types in Customizing.

BAPI to reverse Goods Issue for movement type 601

Hi Everyone,
Does anyone know of any BAPI that could be use to reverse Goods Issue for Movement type 601?
I tried using BDC of transaction VL09 and was able to reverse the GI document successfully but the return message type was 'E' with unreadable message -
Tabelle 'E' enth#t keinen Eintrag f# 'Ch 004 &'
When I tried using BAPI_GOODSMVT_CANCEL, I get the error message 'E M7 130 Material document cannot be processed'.
Best Regards,
Junwen

hi, Junwen!
the following code works pretty well:
      fp_vbeln = vbeln_val.
      fp_budat = budat_val.
      fp_tcode = 'VL09'.
      fp_vbtyp = 'J'.
      CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
        EXPORTING
          i_vbeln                         = fp_vbeln
          i_budat                         = fp_budat
        I_COUNT                         =
        I_MBLNR                         =
          i_tcode                         = fp_tcode
          i_vbtyp                         = fp_vbtyp
        TABLES
          t_mesg                          = it_mesg
       EXCEPTIONS
         error_reverse_goods_issue       = 1
         OTHERS                          = 2.
luck.

Report RFDUZI00 claims about entry for movement type CREIR

Hello,
we have moved from R/3 4.6 to ECC 6.0. Now we have some errors coming up in FI module.
One is this:
Report RFDUZI00 (debitor interest calc. run) ends with a comment before posting:
"For movement type CREIR and interest attribute 01 the table of time dependent interest conditions is not maintained" (message translated from german).
We had to add this entry in transaction OB81 to get rid of this issue.
In 4.6 we didin´t need this entry to run the report successful.
We have checked and did not find any comments in release notes.
Question: Can anybody confirm to this new requirement of the system, which looks like RFDUZI00 or dependent include etc. was enhanced to check entries for creditors (for which reason?).
Possibly we found the answer in OSS 670117, which explains changes in RFDUZI00 relevant since R/3 4.7.
Regards
Dirk
Message was edited by:
Dirk Meinhard

Solved on my own!

Message type control for movement type

Similar Messages

Maybe you are looking for