Message type EDI is not triggering for outbound deliveries

Hello,
When ever the shipment status is completed message type EDI is triggered for the outbound delivery.
However, in spite of the shipment completion the DESADV EDI message is not created in the outbound delivery.
So, i request you to help me in this issue.
Regards,
Anil

Hi,
1st please check the partner porfile for whom it is sent ( Eg -- Ship to party) using T.code WE20 in partner type ku, look for the customer for whom it is sent.
Check for the message type wheter it is add in outbound parameteres.
Finally check the varaint of shipment whether the required output is maintained in the shipment varaint and also make sure that condition record is maintained for the output.
You find some solution with this.
Regards
vk

Similar Messages

Inutilização de NFe: Log de erro Message type 8 is not defined

Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela Machado

Verifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

Goods receipt not possible for outbound delivery...error code 4

hi ,
i created a stock transfer order.
an outbound delivery was created.
pgi was done..
gr was done against this delivery.
but this gr was then cancelled.
now when i am doing gr against this outbound delivery.
i get this eror message.
Goods receipt not possible for delivery 1134930096: error code 4
i have then reversed PGI of this delivery in vl09.
then did PGI again.
but still same error message.
please help.
regards
shashank

Hi,
When system gave you the message with the error code 4, you can click on the message.
There may be various reasons for the error of GRn agaist delivery -
1) GRN already posted against the Delivery
2) Delivery is deleted
3) Delivery is currently processed by another user
System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
Regards,
Prashant

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Down Payments Error: Account type K is not defined for document type DZ T

I am getting the error message: Transaction code: F-29
Account type K is not defined for document type DZ
Message no. F5243
In this case i am trying to post a customer down payment in t.code: F-29.
In the document type DZ in OBA7 we tick only G.L and Customer tab as this is not a vendor document.
Also the settings in T. Code : OBXR where we maintain configuration for customers has been maintained with a special G/L reconciliation account.
any help will be really appreciated,
Regards
Satish

I have checked all the settings
OBXR for Customer Down Payments. It is with indicator A and a Special G/L Account has been configured.
The special G.L Account is of the Recon account type Customers with FSG as Recon accounts
The document type DZ in OBA7 is ticked for G.L and Customer and this is how i think it should be as i am not paying a vendor downpayment
but it still gives me the same error.
Regards
Satish

I keep getting the message your account is not valid for use in the US Store. You must switch to the Canadian store before purchasing. I have selected the Canadian store, but I still keep getting the same message.

I keep getting the message: Your account is not valid for use in the US Store. You must switch to the Canadian Store before purchasing. I have selected the Canadian store, but still keep getting the same message. Any suggestions?

Hi hi-liter,
Are you certain that you are signed onto iTunes & Apps in the Canadian store?
Settings>iTunes & App Stores, click on your AppleID, and then click on View AppleID. Type in your password, then click on Country/Region. Once there, follow the prompts and then select the Canadian Flag.
Hope that helps!
Cheers,
GB

Delete messages stuck in status 12, Recorded for Outbound Processing

I am on a PI 7.10 SP8 system. I have 59,000 XML messages showing in status 12 ( Recorded for Outbound Processing) that I would like to just delete or cancel. These have accumulated over several days of testing interfaces. If I have to allow them to be processed, that would also work but is not needed. I have read about 6 different forum threads and tried several things but nothing has worked yet. 
The messages can not be cancelled from SXMB_MONI. 
The queues are no longer showing in SMQ2. 
I have tried restarting and re-registering the queues. 
I've tried RSXMB_RESTART_MESSAGES and RSXMB_CANCEL_MESSAGES. 
SWPR & SWPC show nothing to restart. 
Any ideas on something else to try? 

Hi,
You can try to delete or archive mesages. use following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Delete Messages SXMB_MONI
http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Too many questions on Archive/Delete messages.
Inder

Source message Message Type: POR does not exist in software component versi

HI All,
I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI.
I have imported the .tpz file through the import through "client" option.
I am able to open all the objects but i am not able to open the Message mappings.....
It is throwing the following error:
Source message Message Type: PurchaseOrderRequest does not exist in software component version xx_xx_PO_PROCESSING, 1.0 of xx.com Check whether software component version xx_xx_PO_PROCESSING, 1.0 of xx.com is in the Enterprise Services Repository. Import this or a newer version if necessary.
This needs to resolved very urgently...
Kindly help...
Thanx in advance..
Nandan

Hi,
I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
probably this is a prerequisite for importing your SWCV
I don't think this is related to sp level or anything like that
it's just that SWCV is missing
Regards,
Michal Krawczyk

Error - Account type D is not defined for document type WL

I am getting error while doing PGI (Post Goods Issue).
Error - Account type D is not defined for document type WL

As we had the same problem for a document in our system, I was also browsing for the answer. I saw this thread and now we have found the solution, so could not resist sharing, although it is an old posting.
In these cases it can be that a user wants to create a purchase order of the type UB. But if you have stock transport between two companies, you should not use this order type. You have to use order type NB.
If the user creates the PO with NB then probably they will not get the message.

Class type 022 is not defined for object for BATMAS

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object      BUS1001002
Method               SAVEREPLICA
Message Type         BATMAS
Basic Type           BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hello Jass,
Symptom
The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE cannot transfer any classification information. Please review note 1070634.
First Option :
You should first transfer the batmas and then the clfmas idoc.
Second Option :
You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
E1BP3060_ALLOCATION
E1BP3060_VALUATION_CHAR
E1BP3060_VALUATION_CURR
E1BP3060_VALUATION_NUM
In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
Hope this information helps
Regards
Amber

Class type 022 is not defined for object for batmas in LSMW idoc

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object BUS1001002
Method SAVEREPLICA
Message Type BATMAS
Basic Type BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hi,
Go to TCode OMCE and check the batch level.
If batch is activated at material/client level then use class type 023, if it is at plant level the class type 022.

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: how to fix this?

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>

Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing." I am in the US how do I switch?

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

Message type EDI is not triggering for outbound deliveries

Similar Messages

Maybe you are looking for