Message type FIDCCH for AP / AR

Hi,
Any one used this Message type to transfer AP / AR data.
Its only taking GL relevant data.
Else, any other Message type which can be used to transfer AP / AR data.
Kalyan

Hi,
Try checking these 2 message types also -
FIDCC1
FIDCC2
Am not fully sure
Regards,
Sridevi
<i>Assign points,if useful</i>

Similar Messages

  • Message Type FIDCCH

    I have vendors sending in some minor changes to their invoices via EDI and message
    type FIDCCH with the message type configured with process code FICH. On segment
    E1FIREF they are sending RMRP or BSEG for field AWTYP.  Can another Reference procedure
    be used like BKPFF. If not how can I go about having BKPFF used.
    Thanks for the help in advanced,

    Hi,
    Try checking these 2 message types also -
    FIDCC1
    FIDCC2
    Am not fully sure
    Regards,
    Sridevi
    <i>Assign points,if useful</i>

  • MESSAGE TYPE DEFAULT FOR PURCHASE ORDER

    Dear All,
    I want to set default message type ZNEU for all purchase order. I try this with T-CODE MN04 AND MN05 but it is not working.
    SO HOW I MAKE MESSAGE TYPE DEFAULT FOR PURCHASE ORDER
    Regards,
    Pankaj

    Hi,
    Miantain the all the conditions records in t.code : MN04. after that check for the "Define Partner Roles for Purchase Orde" what did you mentioned for new or change as per that,
    Check you had fine tune the output (message) type in following path:
    SPROMMPurchasingMessageOutput controlMessage tyoesDefine message type for Purchase Order--Fine-Tuned Control: Purchase Order
    Select the check box coresponding to your output(message) type ZNEU to have print output for this message type .......
    Now try creating PO & u will have default message type ZNEU......
    Hope this will help you.......
    BR,
    Patil

  • What are the message types available for Vendor Address?

    Hi Everybody,
    I need to read the all the change pointers of Vendor Address using the function moudle 'CHANGE_POINTERS_READ'. To call this FM  I need to pass Address's Message Type. I am passing ADRMAS as message type. but i am not getting any records into change pointers internal table.
    Pls help me out by informing the message type of Vendor Address.
    Regards,
    Nagaraju Maddi

    Hi,
             The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
    Check the table <b>TSAD7 for Address groups</b> (central address management)
    <b>Reward points</b>
    Regards

  • Difference in Fault message types & exceptions for Webservice in ABAP

    Hello all,
    I am relatively new to the web service framework in SAP. My problem scenario is as follows.
    I have a WSDL file of a webservice from 3rd party non-SAP s/w  and I want to replicate the same webservice into SAP by creating FM in SE37 with same imp/exp parameters and functionality.
    So I first created a consumer proxy using the external WSDL file of non-SAP webservice. This generated imp/exp DDIC structures in SAP. Now I created a RFC FM in SE37 with similar Imp/exp parameters and relesed this FM as a webservice.  I then created another consumer proxy using WSDL of this newly created webservice in SAP.
    In the old consumer proxy I see a structure as SOAPFault as a Fault message type which has 3 fields ERRORCODE, TEXT, DETAILS but in the newly created consumer proxy I don't see Fault message types but i see exceptions which i mentioned in exception tabs while creating the FM. The imp/exp parameters are identical.
    So my question is while creating a web service in SAP using a FM in SE37, what needs to be done in order to get the Fault message types getting created automatically when we create a consumer proxy for this webserivice?
    Also based on the WSDL of 3rd party system , can i replicate the same web service in SAP ?
    Appreciate your expert advice on this.
    BR
    Nilesh Puranik

    Hi Krishna,
    I've read the SAP description about Fault Message Types but I'm still struggling on how to use them correctly.
    Why do we need them if I can't do nothing with it on the BPM side? After the mapping of the FMT, I'd like to acess it so that I can send a description back to the original system...The thing is, in BPM you can't acess the FMT, you can only create a new BRANCH (on a block step) for it...
    I've tried to acess the description text on trace which comes with the message, but it seems that the trace only serves for posting info, and not for getting any...
    The Mapping Runtime Constants have some information where you can read some descriptions, but nothing related to the errors....You can read the Receiver service, sender, interface_namespace, but nothing from the ERROR tag...
    Is there a way to get the description? Or anything related to the error tag?
    Thanks in advance

  • Message type control for movement type

    Hi All,
    We are using two movment types,
    301 - Plant to plant transfer
    934- initial stock entry reversal(custom one).
    Issue is when ever available stock of materia lM1 is consumed against some sales orders , if we try to do transfer posting using transaction MB1B MOVEMENT TYPE 301 system is throwing error message zero pcs available for M1 and not allowing us to post which is correct (messge M7 181).
    But for the same material M1 if try to post using transaction MB1C and movement type 934 system is tHrowing warning message zero pcs available for M1 , but allowing to post there by removing the confrimed / consumed stock from the sale order. here also the message is M7 181.
    So please let me know can same message type is used differently for two different movement type. If so where is the setting is being done.
    Regards,
    Babs

    Dear ,
    Because u already book for sales orders so release the  sales orders you can do, or increase the stock and u can use .
    regards
    shiv

  • Output message type triggering for all

    Hi,
    I want the output messages to be triggered for particular Vendor and doc type with ALE config.
    Now the config is such tht whenever the PO is created for doc type, the output type gets triggered for ALE partner .
    So need guidance.
    Thanks

    hi,
    Please check whether the access sequence attached to your Condition type has a condition table with Document type and vendor field, if not then you can add one or create a new Access sequence and attach it to you condition type.
    Next you maintain the Condition Records for the doc type and vendor combination, and the system shall trigger the message type automatically.

  • Message type 'INVOICE'  for intercompany billing?

    Hi all,
    I have a requirement that i have to  create the invoice receipt for FI when the billing document is created in the same client?
    Please provide me the details for this
    such as output type and process code and other master data settings that have to fill?
    Thanks,
    Vamshi.

    Hi,
    For creating a intercompany invoice interface you need to do the following steps:-
    1. You need to maintain the Account at Customer in the customer master
    2. Ask your functional consultant to create an output type for you for this interface and let that output be triggered in the billing document.
    3. You need to create a partner profile for Customer and Partner Role as BP.  Message Type INVOIC, Message code FI and Process Code as SD08.
    4. You need to maitain the logical address to convert it to the vendor, this entry is maintained in the table EDILOGADR.
    5. Till now what ever you maintained is for the outbound interface.
    6. You need to create a partner profile for the vendor as Message Type INVOIC, Message Code FI & Process code INVF.
    7. The FI functional consultant has to enable that vendor as EDI and he has to make the necessary setting for the document to be posted successfully.
    If your functional consultant is not in a position to do them, you can ask me and i will help you to do those setting as well.
    Thanks,
    Mahesh.

  • Details for ALE Message type 'INVOICE'  for intercompany billing ?

    Hi all,
    I have a requirement that i have to create the Invoice receipt for FI when the billing document is created ( VF01)  in the same client?
    Please provide me the details for this
    such as output type , process code and other master data settings that have to fill?
    Thanks,
    Vamshi.

    Hi prakash,
    Thanks for the reply and it is very helpful.
    But i am using message type RD00 and shall i use this?
    Else, please specify the details that i have to maintain to use RD04 clearly stap-by-step?
    Thanks,
    Vamshi.

  • PI IDOC Message Type Correlation for Customers & Addresses

    Hello
    We are struggling with an interface from MDM through PI and into ECC.  For example, PI grabs customer/vendor records from MDM and then sends them on to ECC.  In the process it creates IDOCS of two different message types (ADRMAS u2013 addresses, and DEBMAS u2013 for customer/vendor records)
    What is happening is that the Addresses and Customer/Vendor records are not being processed as logical units of work (LUW).  This is causing data synchronization issues in ECC where addresses are updated but customer master records are not.
    We are in desperate need of having two different IDOCS (ADRMAS and CREMAS) having related records between them be treated as logical units of work so that the related records are updated together.  If one portion fails it all should fail. 
    So far the team has not found good documentation on how to accomplish this in PI so that ECC can see that the IDOC records are related and to be treated as related LUWs. 
    Any help or references would be appreciated.

    hi,
    >>Getting idoc errors in production is a regular occurence in any system including production due to trouble with the data (bad zip codes, bad foreign keys, failures due to data validation routines, configuration changes that impact data structures).
    I know - that's when we can use WE02 and correct the wrong data
    >>There is SAP documentation that suggests that correlations/relationships can be established between idocs in PI and ECC (serialization), but we just don't quite understand it yet, and we are not confident that it will do for us what we need.
    no serialization will not do what you need as if the first one will be ok
    and second one not - serialization will not rollback the second one - sorry
    Regards,
    Michal Krawczyk
    http://mypigenie.com XI/PI FAQ

  • IDOC Message type suitable for VA32

    Hi,
    I am trying to investigate the automation of transaction VA32, "Change Schedule agreement ".
    Information relating to my updates from the customer are now available in an electronic format. I therefore wish to now automate this time consuming job using IDOC'S.
    I have a little ALE knowledge based on predefined models, but on the occasion I am struggling to find exactly the message type and fields to use.
    Can anyone help or point me in the right direction.
    Thanks
    Andrew

    Hi Andrew,
    There is an IDoc E1CUSTSCHEDULAGREEMENT_CONF
    The associated standard IDoc Input handling Function module is IDOC_INPUT_CUSTSCHEDULAGREEMEN.
    For more information and functionality, there is an associated Business Object BUS2035.
    Note that these are not set to 'released' status by SAP. But these should work for you.
    Thanks,
    Bhanu

  • Message type schema for the marketplace adapter

    Hey guys!
    We are trying to using the marketplace adapter in XI to send a Shopping Cart from SRM to the Marketsite. It seems as if we need specific kind of schema for the message type that correspond to a SOX schema for the marketsite.
    Can anyone share how the schema that should be imported into the integration repository should look like? An example maybe?
    Thanks in advance!
    Glenn
    PS. 6 - 10 points for the first helpful reply! )

    hi
    After Importing it is like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
         <xsd:element name="SXIDEMO_AIRL_FLIGHT_CHECKAVAIL">
              <xsd:complexType>
                   <xsd:all>
                        <xsd:element name="FLIGHT_KEY" type="BAPISFLKEY" />
                   </xsd:all>
              </xsd:complexType>
         </xsd:element>
         <xsd:simpleType name="genericDate">
              <xsd:restriction base="xsd:string">
                   <xsd:pattern value="....-..-.." />
              </xsd:restriction>
         </xsd:simpleType>
         <xsd:simpleType name="date">
              <xsd:union xmlns="urn:sap-com:document:sap:rfc:functions" memberTypes=" xsd:date genericDate" />
         </xsd:simpleType>
         <xsd:complexType name="BAPISFLKEY">
              <xsd:sequence>
    Thanks

  • Docu of Idoc message type CRMXIF_ORDER_SAVE_M02 for service request

    Hi,
    We are using the customer interaction center / service desk in CRM 7.0 and want to send service calls from other systems to our CRM service desk.
    I've found that this should be possible via IDOC CRMXIF_ORDER_SAVE_M02.
    Does someone has more documentation of this idoc message type (meaning of the fields, obligatory fields, ...) ?
    Thank you,
    Stefan

    Hi,
      Go to we19 t-code, there give messgae type CRMXIF_ORDER_SAVE_M and then execute.
    Next screein beside EEIDC double click and give send and receiver port.
    After that clcck CRMXIF_BUSTRANS popup will open. Fill required fields.
    Then expand CRMXIF_BUSTRANSA do the same for all.
    After that click start oubound processing.
    For more information go to SPRO->CRM->CRM middleware and related componets->exchange data with external components->XIF adapters then click OVERVIEW documentation help. Then click CRMXIF_ORDER_SAVE.
    You will get the information on outbond as well as inobound.
    Regards
    Srinu
    Edited by: sreenivasulareddy eragamreddy on Jul 10, 2009 7:45 PM

  • Message Type inconsistent for Master Data Deltas

    Hi All,
    I have a question regarding the message types for the master data deltas. What I noticed on our server was that the message types (TCODE: BD52) is different for different severs for the same master data deltas (mostly they would begin with RS. If you do a wild card search RS*, you would find them for the different master data delta enabled extractors). Is this standard or is there something that we can do about it? I only ask because we modified the message types for one of the extractors to <u>create</u> a delta for the enhanced field on our extractor. This was done to create a delta when the enhanced field changes when nothing else changes on our standard extractor.
    Please advise. Also let me know if you want me to clarify something above.
    Regards,
    Ashmith Roy

    RSnnnn message type is created/assigned(in the source system) first time you initialize the delta for the master data. Hence it is normal to have different no assigned to different master data depending on when the particular master data was init (on that system).
    When you say you enhanced the message type, what did you do?

  • IDOC message type use for standard price ALE

    Hi,
    Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
    ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
    I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data?  thx.

    Hi
    I think the IDOC type will MATMAS01.
    Thanks
    Deepak

Maybe you are looking for