Message type for modifying a Delivery via DELVRY03
Hi folks,
I have a requirement to modify an existing delivery with event dates/times in my clients SAP system based on a file received from a 3rd party Logistics provider. I intend to update the Idoc with DELVRY03. What Message type and process code do I need to use? DESADV can be used to create a new delivery, can it be used to modify one as well?
Points will be rewarded.
Cheers,
Steve
One further thing. Using DELVRY03, I keep getting an error message stating that the field exidv and vhilm are not populated, which is true becuase I'm not sending shipping notification details through, I just want to modify the Delivery. Is DELVRY03 the right Idoc type to use, or should I be using a different Idoc Type?
Cheers,
Steve
Similar Messages
-
Hi,
Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
We are using an ECC 6.0 system (WebAS 700)
Regards,
AdityaHi,
You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
This process code will call FM IDOC_INPUT_MBGMCA to reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
Regards,
Ferry Lianto -
Message Type for Material Master Data Changes
Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa -
Issue with Message Type Triggering during Inbound Delivery Creation
Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
ThanksHi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks, -
Creation of New Message Type for Extended IDoc
Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik -
Creation Output Message Type for Scheduling Aggrement
Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
PankajHi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar. -
What is the logical message type for Inbound Credit Memo (MM)
Hi Folks,
What is the logical message type for Inbound Credit Memo (MM)
Plz explain.
Thanks,
MattHi Mat,
The logical message types are as follows.
/DSD/HH_CREDITDATA DSD Credit Exposure and Credit lLmit
CREADV Credit memo display
CRESTA Copy credit status (DebtorCreditAccount)
SBINV Credit memo procedure with invoice creation
SBWAP SD Credit Memo Procedure with Automatic Postin
You can search for message types in database table EDMSG.
Regards,
Vimal. -
How to set a default Billing type for a particular Delivery type
Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
RajeshThere is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM -
Equivalent Idoc message type for EDIFACT BANSTA
Hi Experts,
I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
Thanks in advance.
Regards,
RaviThanks raja shekar. I posted this thread in ABAP development forum.
-
MB1B transfer posting Idoc/Message type for outbound and inbound
Hello All
Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
Thanks
RickyIts WMMBXY
-
Idoc Message type for Customer Change XD02
Hi All
As per the business requirement, we need to have inbound interface to ECC system, in which we will add more partner's to the existing customers.
I tried posting Idoc thorugh WE19 using message type DEBMAS and basic type DEBMAS06. It is creating the new partner which is part of the idoc but it behaves like a refresh, i mean the already existing partners are getting deleted.
Tried to find the relevant message type for XD02 but did not find other than DEBMAS.
Can anyone let me know how to acheive this.
Following are the segments am passing.
E1KNA1M :
MSGFN 4
KUNNR 1234
ANRED /
BBBNR 0
BBSNR 0
BUBKZ 0
KTOKD /
LAND1 /
NAME1 /
ORT01 /
ORT02 /
PSTLZ /
REGIO /
SORTL /
SPRAS /
STRAS /
TELF1 /
LZONE /
UMJAH 0
JMZAH 0
JMJAH 0
UMSA1 0
HZUOR 0
CIVVE X
SPRAS_ISO EN
E1KNVVM :
MSGFN 4
VKORG 1
VTWEG 1
SPART 1
KALKS 1
AWAHR 100
ANTLF 9
KZAZU X
LPRIO 1
VSBED 1
WAERS USD
VWERK ABCD
UEBTO 0
UNTTO 0
PODTG 0
E1KNVPM :
MSGFN 4
PARVW RE
KUNN2 1010
PARZA 0
After execution, i am getting IDOC status 53 with message "Changes have been made".
Thanks & Regards
Madhu KHi Madhu,
/thread/2051526 [original link is broken]
Same post in abap general.
Regards,
Madhu.
Edited by: madhurao123 on Oct 4, 2011 11:59 AM -
Message type for idoc PROJECT01
Hi ..
How to send a PROJECT01 idoc from one r/3 to another or third party system.What is the message type for the idoc and what are the configurations required.
TharunHi Tharun,
The Message Type for the basic type PROJECT01 is PROJECT.
Using this basic type u can send only project and wbs related Information using BAPI.
For Configuration the steps are as mentioned below.
1.Define Logical Systems in sender and receiver.(SALE)
2.Assign Client to Logical system in the respective systems.(SALE)
3.Create RFC Destination.(SM59)
4.Create a distribution model .(BD64)
5.Click on Add Bapi, specify your sender, receiver the Object name as <b>ProjectDefinition</b> and the select the Method of your interest.
6.Generate Partner Profiles in the Sender System.
7.Distribute the Model to the receiver.
8.Generate Partner Profiles in the Receiver System.
Hope this helps you..
Let me know incase u have any questions.
Thanks & Regards,
Vanita -
Need help for new message type for PO archiving
Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1. Defined new Table 513 Purch.Org./Plant.
2. Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3. Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4. Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5. Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6. Assign Schema to Purchase Order
Procedure RMBEF1
7. Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8. Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankitthe problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator -
Multiple message types for an idoc type
Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?Hi Kunal,
Below are my thoughts from a design perspective,
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
OR
Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
Regards,
Chen -
Define fault message type for RFC
Hi,
How can I define the fault message type for RFC so that when I import RFC from another server to XI, I can view this Fault type.
So far I could only see Request and Response type .
ThanksHi Rokie,
Acc. to me by default we are having only request and response mesages for RFC and in case some exception/fault is there the RFC will through this in the response under the Return parameter having msg,id number as sub fields which you can map to fault message type.
Sachin
Maybe you are looking for
-
Difficulty in creating a chart by using a function with a returned value
Hi, I am having a problem in using own function to create chart a with a returned value as the chart. If not using the returned value, it works fine. Is this a known issue?
-
Shared data doesn't show up after connection
I've been having this problem for a while now. Not sure when it began. I can see my shared computers on my home network, but when I connect to any of them, I can't see any information. It tells me I am connected but nothing appears in the Finder wind
-
Problems downloading CS5 Design Standard students edition on Mac OS X (Lion)
HI: I just recently bought a students license for CS5 Design Standard. I am trying to download the file as per the instructions on the mail sent but as soon as it reaches 2 GB dissapears from the download and it cannot be launched. Can you help??
-
I recently moved into a new town and no longer receive Verizon service there. According to the Verizon service map I should be receiving coverage. Is there anything that can be done about this?
-
How can we identify what are all user exits are there for sales orders,deli
Dear All, How can we identify what are all user exits are there for sales orders,deliverys and invoices thanks nitchel v