Message type for Scheduling Agreement - Outbound IDoc

Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Similar Messages

Idoc Message type for Scheduling agreement

Dear Experts,
How to configure to create Idoc for Scheduling agreement (not the releaseed schedule lines) ?
I am trying to use message type ORDERS05 but it is not working.
Will any body guide me preferably step by step process for this ?
Thanks in Advance,
Best Regards,
Raju

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Idoc for Scheduling Agreement-Outbound

Hello,
Can anyone provide the Idoc that can be used for Scheduling Agreement- Outbound
Thanks

The DELFOR.DELFOR01 IDoc can be used for delivery scheduling. Is that what you're looking for?

Creation Output Message Type for Scheduling Aggrement

Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
Pankaj

Hi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar.

Message type :FIDCC2/ IDOCFIDCCP02 - Triggering outbound IDOC

I have to send the FI accounting document of certain customer groups to the third party system .
Can anyone pls let me know how to trigger the outbound IDOC for the message type FIDCC2 after the FI document is created.
I have configured BD64 but can not find which program to trigger to generate the outbound IDOC with the FI data.
Thanks,
Prashanth

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

IDOC for scheduling agreement

i need to create a Z output type for scheduling agreement(application EV in NACE) which triggers an idoc...Its for the whole agreement and not for each line item. ..i need to know the basic idoc type for scheduling agreement to be assigned in partner profile (like DELFOR for delivery schedule) in WE20..
Edited by: nevinphilip on May 10, 2010 9:30 AM

The DELFOR.DELFOR01 IDoc can be used for delivery scheduling. Is that what you're looking for?

MB1B transfer posting Idoc/Message type for outbound and inbound

Hello All
Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
Thanks
Ricky

Its WMMBXY

LSMW using IDOC method for scheduling agreement

I am using LSMW IDOC method to create Scheduling agreement. i am using message type : PURSAG_CREATE. I have completed the field mapping and when i tried to process the idoc i am getting the following error.
No instance of object type PurchSchedAgreement has been created. External reference: # 1
There are no clue why this error is popping up.
please let me know if anyone faced similar issues.

Are you using external number range for scheduling agreement, then you have to pass the SA number too if not then check with your MM functional consultant to change the number range from external to internal provided it is agreed by your customer

ME84 / Messages for scheduling agreement Release

Hallo,
I wold like to create SA releases(agreement type = LPA) via ME84 separately for JIT-schedules and FRC-schedules.
I use LPH1 as message type for the FRC-schedule and LPJ1 as message type for the JIT-schedule.
The creation of JIT-schedules works fine if I select 'JITSchds Only' in ME84. The result is ONE LPJ1-message with the content of the JIT-schedule.
But I have a problem with the FRC-release, because when I select 'FRC-release Only' in ME84 I get
one LPH1-message and one LPJ1-message as well (both messages have the content of the FRC-release).
But I expect only ONE LPH1-message.
Please advise what I have to do to get only ONE LPH1-message in case of creation of FRC-release.
Thanks a lot
Olga

Hi,
Do check if any changes are carried for your schedule lines as both JIT and FRC was generated.
Do check also the below thread which was discussed for similar query which might help you.
http://scn.sap.com/thread/3352142

Multiple message types for an idoc type

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?

Hi Kunal,
Below are my thoughts from a design perspective,
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
OR
Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
Regards,
Chen

Creation of New Message Type for Extended IDoc

Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.

Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik

Equivalent Idoc message type for EDIFACT BANSTA

Hi Experts,
I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
Thanks in advance.
Regards,
Ravi

Thanks raja shekar. I posted this thread in ABAP development forum.

Idoc Message type for Customer Change XD02

Hi All
As per the business requirement, we need to have inbound interface to ECC system, in which we will add more partner's to the existing customers.
I tried posting Idoc thorugh WE19 using message type DEBMAS and basic type DEBMAS06. It is creating the new partner which is part of the idoc but it behaves like a refresh, i mean the already existing partners are getting deleted.
Tried to find the relevant message type for XD02 but did not find other than DEBMAS.
Can anyone let me know how to acheive this.
Following are the segments am passing.
E1KNA1M :
MSGFN     4
KUNNR     1234
ANRED     /
BBBNR     0
BBSNR     0
BUBKZ     0
KTOKD     /
LAND1     /
NAME1     /
ORT01     /
ORT02     /
PSTLZ     /
REGIO     /
SORTL     /
SPRAS     /
STRAS     /
TELF1     /
LZONE     /
UMJAH     0
JMZAH     0
JMJAH     0
UMSA1     0
HZUOR     0
CIVVE     X
SPRAS_ISO     EN
E1KNVVM :
MSGFN     4
VKORG     1
VTWEG     1
SPART     1
KALKS     1
AWAHR     100
ANTLF     9
KZAZU     X
LPRIO     1
VSBED     1
WAERS     USD
VWERK     ABCD
UEBTO     0
UNTTO     0
PODTG     0
E1KNVPM :
MSGFN     4
PARVW     RE
KUNN2     1010
PARZA     0
After execution, i am getting IDOC status 53 with message "Changes have been made".
Thanks & Regards
Madhu K

Hi Madhu,
/thread/2051526 [original link is broken]
Same post in abap general.
Regards,
Madhu.
Edited by: madhurao123 on Oct 4, 2011 11:59 AM

IDoc Message Type for VL09

Hi,
Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
We are using an ECC 6.0 system (WebAS 700)
Regards,
Aditya

Hi,
You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
This process code will call FM IDOC_INPUT_MBGMCA to reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
Regards,
Ferry Lianto

Message type for idoc PROJECT01

Hi ..
How to send a PROJECT01 idoc from one r/3 to another or third party system.What is the message type for the idoc and what are the configurations required.
Tharun

Hi Tharun,
The Message Type for the basic type PROJECT01 is PROJECT.
Using this basic type u can send only project and wbs related Information using BAPI.
For Configuration the steps are as mentioned below.
1.Define Logical Systems in sender and receiver.(SALE)
2.Assign Client to Logical system in the respective systems.(SALE)
3.Create RFC Destination.(SM59)
4.Create a distribution model .(BD64)
5.Click on Add Bapi, specify your sender, receiver the Object name as <b>ProjectDefinition</b> and the select the Method of your interest.
6.Generate Partner Profiles in the Sender System.
7.Distribute the Model to the receiver.
8.Generate Partner Profiles in the Receiver System.
Hope this helps you..
Let me know incase u have any questions.
Thanks & Regards,
Vanita

Message type for Scheduling Agreement - Outbound IDoc

Similar Messages

Maybe you are looking for