Message Type ( Idoc Type ) for customer master & Pending invoice

Hi
My Client is doing sale in POS for credit customers and credit customer master should be sent to POS as outbound Idoc.
1.What is the standard message type for sending Customer masters to POS. WP_PER01 is not activated for version 700 ( message getting on WE60 ). Plse let us know is there any another message type for customer master.
2. Also i need to send the credit limit of the customer to POS . Is this possible by standard message type or we need to go for ZIdoc?.
3.Is there standard Outbound Idoc ( Message type ) available to send the Pending invoice list toPOS?
plse help me on the above
Regards
Anis

Hi ,
you can use DEBMAS message type for customer master IDOC ,
Tcode Bd12
Thanks,
Amit

Similar Messages

IDOC type for customer master

Hi friends,
Could anyone explain me about...

Use existing IDOC types to send the customer master data, vendor master data and material master data from the sender system to the receiver system.

Hi,
Please maintain distribution model (BD64) and partner profile (WE20), RFC connection (SM59) for message type DEBMAS (customer), DEBMAS (vendor) and MATMAS (material master).
Once the above configuration done, then you can use the following transactions to send the IDocs.
1. BD12 - Send Customer IDocs (Sender -> Receiver) or
 BD13 - Get Customer IDocs (Receiver -> Sender)
2. BD14 - Send Vendor IDocs (Sender -> Receiver) or
 BD15 - Get Vendor IDocs (Receiver -> Sender)
3. BD10 - Send Material IDocs (Sender -> Receiver) or
 BD11 - Get Material IDocs (Receiver -> Sender)
Regards,
Ferry Lianto

Message type ,IDOC TYPE , PROCESS CODE for Edi 990

Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay Kolla

Hi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri

Output types for customer master

Hi,
How do I create an output type for customer master and assign it to an output determination procedure for customers. Thanks for the help in advance.
Regards,
Vijay

Any bright ideas guys?

Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

Hi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu

Any Idea Which Message type/Idoc Type should be used for FI Invoice

Hi Experts,
Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
Thanks,
Sony

Hi Sony,
I never dealt with FI IDoc.
I think you need to setup EDI outgoing payment in IMG. Please take look this report RFFOALE1 - ALE Distribution of Payment Data and RFFOEDI1 and check also the program documentation.
Hope this will help.
Regards,
Ferry Lianto

Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Hi Group,
I need to create IDOC's for Vendor master and customer master using ALE. Whenever they create vendor/customer or changes to vendor/customer should create IDOC's.
Can anyone please help me out how to proceed? I know that we can use CREMAS/DEBMAS and CREMAS04/CREMAS...But I would like to know how to use those.
Thank-You,
Venky

Hi Sai,
Welcome to group.
Related to CREMAS/DEBMAS, for your situation, you can use the change pointers. With this, when ever there is an change/create, it will create an entry in CDHDR & CDPOS and based on that it will create the IDOCs for these.
Activate the change pointers for these message types and run the application RBDMIDOC periodically (whenever you want). This application will create the IDOCs based on your entries.
To activate the change pointers, the TCODEs are
BD50 Checking change pointer is activated for Message Type
BD52 Checking which fields are configured change pointer to create. (please make sure, an entry will exist in BDCP table)
I hope you know the remaining configuration related to partner profile entries (WE20) i.e. to which system you want to send the idocs and Inbound or Outbound etc.
Let me know if you need further info.
shylesh

What is Message Type & IDOC Type?

He Experts!,
What is Message Type & IDOC Type? What is the difference between them?
Thanks in advance.
Sekhar

Hi,
Please try these transaction codes.
WE82 - Message Type and IDoc Type
WE64 - Process Codes (Inbound and Outbound) for Message Type.
Message type. A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterizes the data sent across systems and relates to the structure of the data called an IDOC type (see below). For example, MATMAS is a message type for Material Master, and INVOIC is a message type for an Invoice (Billing Document). ALE supports over 200 message types in R/3 and about 200 application areas.
IDOC type and IDOC. An Intermediate Document (IDOC) type represents the structure of the data associated with a message type (DEBMAS02 for message type DEBMAS Customer Master, and WMMBID02 for message type WMMBXY Goods Movements), while an IDOC is an object containing the data of a particular message type. IDOCs are data containers with intelligence built in. Each IDOC contains one and only one business object. For example, an IDOC of type SHPMNT01, message type SHPMNT, will contain data only of one Shipment Document. Generally, the architecture of an IDOC is independent of the message type by virtue of ALEs ability to redefine it for any message type.
Use transaction BD64 or the following menu path to maintain the model: From the IMG (Implementation Guide), Cross-Application Components -> Distribution (ALE) (*) -> Distribution Customer Model -> Maintain Distribution Customer Model Directly -> Maintain Distribution Customer Model Directly.
Thanks,
Sankar M

Change Message Control for Customer Master data

Hi Friends,
I have to choose/populate a message when the user is about to create an already existing customer.
In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
OK...
When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
Now .....
I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
I want to have the same message with message types 'E','E', and 'I' respectively.......
How is this possible (or) what should i do to meet my requirement :-|
Expecting ur answers
Thanks in advance ........
Cheers,
R.Kripa.

Hey yes it is not possible (as of now
I ve met the requirement by just using message statement in the program itself ............
My requirement is met but still if anyone knows about this do answer / reply
Thanks
Cheers,
R.Kripa.

Generate outbound idoc for Customer Master

Hi Developers,
I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
Thanks in advance for helping.
Regards,
Gajendra

Hi,
If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
If you want to send the idocs automatically, then you will to configure some program.
Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
Transaction SPRO
SAP Customizing Implementation Guide -->
SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
Take a look at this thread.
Re: automatic Idoc outbound
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

Outbound output type & Idoc type for MIRO (Invoice Posting)

Hi Gurus,
I have requirement like , I want to send the outbound IDoc to a external system containg the invoice detials after Saving in MIRO.
I am not able to find any output type & Idoc type for the same.
By going through varios threads , I found that there tell there is no Idoc type & output type for sending Idocs after MIRO.
Kindlt let me know, if it so, or how this req can be fullfiled by other ways.
Thanks
Amresh

Hi,
Create Custom Idoc type with required fields,custom output type and assign it to partner profiles.(If there is no std idoc type or output type)
Use Funtion module MASTER_IDOC_DISTRIBUTE to generate Idocs while saving MIRO, for this you need to find exit or implement implicit enhancement while saving MIRO.
Regards,
Ashok.

Nhi guru's cross apps what is basic type,idoc type , message type

nhi guru's cross apps what is basic type,idoc type , message type plz help me i am larning how to work on idocs using ale explain me like realtime environment

Hi,
Hi,
i got this data from sdn .plz go thru might be helpful
IDOC is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
how to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
For creating a IDOC u need to Create a segment type in WE31.The internal table in which we store the data to be passed to the IDOc thos fielda are defined in fieldname and data element.Save and release the segment.
Create IDOC type in WE30. Give min and max types. Mark it as mandatory.
Create Message type in WE81.Assign it to a change request and save it.
Link this message type with IDOC type in WE82.
Then start your coding and pass the details of Data and control records.
Just have a look at these links:
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
Creation of IDOC:
idoc creation
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=creation%20of%20idoc&cat=sdn_all&start=11
ALE/ IDOChttp://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
i think this will helps u
reward is usefull

Basic type, Idoc type, Message type

hi,
can anyone please explain me the exact difference between basic type, idoc type and message type...
Thanks in advance,
Krish

Hi,
Idoc Types and the Basic Types are the same which is provided by SAP Standard Idoc Names.This will have the releases like 01, 02 ,03
And the Message type names will be the same as Idoc type name with out releases
The combination of the message type & Idoc type will be------CREMAS.CREMAS03( Message type.Idoc type)
Check this Screen for better clarity , and we added some extra Segments to the standard Idoc also, so thats why it has the Extension also
http://img182.imageshack.us/img182/3749/64960008jl7.jpg
Regards
Seshagiri
Edited by: N V Seshagiri on Aug 20, 2008 8:51 AM

In cross apps what is basic type,idoc type , message type

in cross apps what is basic type,idoc type , message type explain to me breflley how to work on realtime plz help me i am learning

ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985

"Partner Determination Steps for Customer Master" clarification

Hi,
Let me clear myself at the outset itself, that I searched SDN for my below mentioned query, however I could not find any answer to my satisfaction....here I am posting again
In "Partner Determination for Customer Master", the following steps are undertaken -
Step 1:
1.a.) Create New Partner Determination Procedure
1.b.) For each Partner Determination Procedure, different Partner Functions, which are applicable for that specific determination procedure, are assigned. (along with other properties like if the PF is mandatory, not modifiable )
Step2:
"Partner Determination Procedure Assignment", here we assign different Partner Determination Procedure to different Account Groups. In other words, indirectly, we assign the partner functions to account groups. Right? (Please correct me if I am wrong)
Step3:
"Partner Function". Here we define new partner functions, (which are used in Step 1...)
Step4:
"Account Group- Function Assignment" - Here we assign the Partner Functions to Account Groups
Now My Question
(A) Since the Partner Functions are assigned (via partner determination procedure) to account groups in Step 1, then why Partner Functions are assigned AGAIN to account groups in Step 4. What is the significance of this assignment in Step 4.
(B) Is there is particular sequence of Steps (1 to 5), one should follow when somebody has to create new customer account group and/or new partner function.
Thanking you all in advance.

Dear SR
Leave SAP Partner Determination screen for 2 minutes and first understand the logic
1. Create the new partner functions
2. Create the new determination procedure
3. Link the new partner functions to the new determination procedure and add mandatory, non modifiable ,optional creteria
4. Assign the new determination procedure to the document type or account group at appropriate level
This is essence and this is for all 8 levels like CMR,sales doc header,item etc
Now coming to your qn
When you define a new account group ( you might be aware account group controls partner functions of CMR) you will say that your new account group will carry out patner functions like SP,SH,BP,PY
That is ACCOUNT GROUPS function assignment
Whenever you create a new account group you will do field selection in OBD2 like suppress optional.reqd etc,create no ranges and assign no ranges and also mainly this activity partner determination
These are must settings for a new account group
AG is the german key for sold to party Partner determination procedure
This is step 1
Then in next step you will tell AG will carry out such and such partner functions Step 2 like mandatory not modifiable etc
Step 3 is link the AG to your account group
Step 4 is partner functions say if you want to create a new partner function say SB special stock partner
(in concept this is the firststep)
Step 5 is once again partner function account group assignment
So when you create a new partner function you will do step 4 first and step 5 and then 1 and 2 and 3
when you create a new account group you will do step 5 and then 1 and 2 and 3
Hope you understand now
Partner functions are relatives in your family
Say in a family we have Father ,mother sister, brother (these 4 partner functions)
This is called as Happy Family and this Happy Family is the Partner determination procedure in SAP
This Happy Family is linked to the account group
So Happy family means there are 4 partner functions
So whenever you create a CMR in the account group this father.mother,brother,sister will come as default
Suppose you add another partner function say Uncle
First you have to create uncle
Then you have to tell this account group will accept uncle
Then link the uncle in the happy family that is determination procedure of SAP along with the 4
Then assign happy family to the account group
Now when you create a CMR along with father.mother,brother,sister along with that uncle will also come
Regards
Raja

Message Type ( Idoc Type ) for customer master & Pending invoice

Similar Messages

Maybe you are looking for