Message type ,IDOC TYPE , PROCESS CODE for Edi 990
Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay Kolla
Hi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri
Similar Messages
-
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214
Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AMHi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu -
Idoc type, message type and process code for EDI 940 & 945
Hi,
We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
Thanks in advance for the help.
Regards,
GajendraHi Gajendra,
For EDI940, you can use message type SHPORD or WHSORD, IDOC type DELVRY01 and process code DELV.
For EDI945, you can use message type SHPCON or WHSCON, IDoc type DELVRY01 and process code DELV.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Attachment of mesasge type to a process code..
Hi..
When I am trying to attach a message type to a process code , for outbound it is allowing me to do so but for inbound it is not allowing me.
So can anyone please tell me where is the problem?
ThanksHi Subhash,
Please ensure you have setup ALE Attributes (BD51) then message/application object (WE57) prior to setup process code (WE42). Otherwise you may not able to setup/assign your function module.
Also find below link which will show you step by step on how to configure inbound IDoc processing.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
Hope this will help.
Regards,
Ferry Lianto -
Doubt in IDOC's - Process Codes
Hi,
Currently i am working on an object related to IDOC generation. This is my first object in IDOC's. I am doing it from the scratch including creation of segments, IDOC type, message type, process codes...
In this process, I am developing a function module that should be assigned to the process code. My doubt here is, is there any standard interface to the function module that we have to assign to the process code?
I am also giving the flow which i will be using in developing the Function module. Please go through it and kindly let me know if I am doing it in the right way or not?
1. Extract data from data base based on the entry in NAST
2. Filling IDOC DATA & Control records
3. Calling the FM MASTER_IDOC_DISTRIBUTE to generate the IDOC
Please suggest me whether i am doing it in the correct way or not?
Thanks in Advance,
Best Regards,
PhaniHi,
For outbound u need to attach ur FM to the process code in WE41 tcode..I think u r using message control method for ur requirement.please look at the configurations for outbound using message control method.we use we41 (outbound process code) and we use this in the message control tab in the partner profiles.
The transaction codes that are required for this method are
We81
We30
We31
We82
We21
We20
Bd64
Nace
Me22n (purchase order), va02 (sales order) etc.
Ex: purchase order.
Message type: ORDERS
Idoc type: ORDERS05
Outbound process code for purchase order: me10
Regards,
Nagaraj -
Process code for 869(EDI ) Order Status Inquiry Message type.
Hi Gurus,
Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
Thanks,
SudhakarHi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert. -
Message type and Process Code for 940 IDoc
Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar. -
Inbound Idoc Type / Message Type / Process Code for Delivery via Tcode VL0N
Guys,
I need to to Idoc Type and Message type for to create Delivery ( Tcode VL01N ) for a sales order.
I tried Idoc Type DELVRY03 and Message Type DESADV, but this is for Purchase Order ( VL31N ).
Kindly help me.
Regards
Srikanth MGuys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M -
Process Code for Message Type LOIPRO(in ALE/IDOCS)
Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjalyHi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM -
Message type, Idoc type and process code in ALE/Idoc
Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
Whether Message type triggers the process code or the Idoctype/idoc triggers the process code in Inbound process?
regards
Message was edited by: henryHi Henry,
About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
You can use any one these to serve your purpose.
e.g. you can assign
-process code P1 to message type M with Message code 1
-process code P2 to message type M with Message code 2
Further these process types can be configured to call separate FMs.
Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
I hope it's clear & correct
Thanks,
Ram -
Specific process code for Production order message type LOIPRO
Hello,
Is there any specific process code for Production order message type LOIPRO.
Request you to reply.
Thanks
PrashanthHi Prashanth,
sorry for last thread ... that not contain full information ...
For message type LOIPRO you can use process code APLI.
In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff.. http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
Regards,
Amit -
Finding Process Code for a message Type
Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITYHi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN Auto- ID Idoc process
ED00 Display Idoc using work item
ED00_XML Display idoc using work item (xml)
ED08 Forward idoc
ZABI_DLV_IN Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod -
IdocType, Message Type & Process code for Payroll Posting
Hi Gurus,
In My Project, the SAP HCM is Maintained as a separate instance and rest such as FI/CO resides in ECC ERP. Now We need to Interface the HCM Instance with ECC ERP, where FI/CO resides to post Payroll Results. Hence I am writing a Technical Specs for ALE interface between SAP HCM and ECC ERP. I came to know that a standard ALE is existing for this purpose and I hereby need its Idoc type, Message Type and Process code for the same.
Thanks in advance.
Regards
Vinoth Kumar.RGuys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
Hi All,
Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
IDOC types are:
1) INTERNAL_ORDER_CREATE01
2) PROFITCENTER_CREATE01
3) COSTCENTERGROUP_CREATE01
Urgent help is really appreciated.
Regards,
ShahuHi,
1) INTERNAL_ORDER_CREATE01
Please clarify for which order you are using this.
2) PROFITCENTER_CREATE01 -
PRCM (PRCMAS)
3) COSTCENTERGROUP_CREATE01
COSM (COSMAS)
Reward points if useful.
Regards,
Atish
Maybe you are looking for
-
How to change from LR2 cat to LR3 cat
Hi all, I have been using LR3 since it came out. However, my catalog that I use "Lightroom 2 Catalog" was never updated to a "Lightroom 3 Catalog". Does it matter, if so, how do I manually upgrade? When I backup my catalog, it backs up the catalog
-
Sending 'hided' link in an email
hi there, i am sending an email from sap containing a link to the WAS to a specific application there. the link is veeeeeery long, over 150 charakters. this does not look very fine in the email. is it possible to send the mail from the abap with e.g.
-
Edit a mail message before sending
How do I edit an email in Mail while spell-checking? Sounds simple, but my stupidity means I can't find out how to do it. Here's my scenario: I write a message, hit send and it brings up the spellchecker. Then while doing the spellcheck, I realise th
-
Removing MissingSiteDefinition and Missingsetupfile
Hi, i Need to upgrade Moss 2010 to SP1 but these errors are stopping me... PS C:\Users\User> Test-SPContentDatabase -name wss_content_inet cmdlet Test-SPContentDatabase at command pipeline position 1 Supply values for the following parameters: WebAp
-
Vista and 10g Http server +apex 3.0.1 Please help
previous unanswered post about not being able to find correct installation method. I've setup 10gR2+Http server, installed apex 3.0.1 then copied images but from this point on cannot start http server with error 13 in app. log file. 10gEX + apex 3.0.