Message type in BD10
Hi Experts,
I was created one custom message type ZODNAM_RPWMS.
It has basic type MATMAS05 & extenison MATMASNA1.
Iam trying to create idoc using BD10.
if i press F4 in Message type (R/3 Standard) field in BD10
why iam not able to see my message type ZODNAM_RPWMS?
what settings do i need to do still??
thanks
did you maintained the MESSAGETYPE-IDOCTYPE-EXTENSION linkage in WE82.
if not check it once.
Similar Messages
-
Message Type not visible in BD10
Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deeptihi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar -
Inbound Processing with reference to user defined Message type
Respected Readers,
I have created a segment with fields
Matnr
mbrsh
mtart
vpsta
maktx
meins
matkl(Total 7 fields)
I have created a idoc also and a message type and assign the idoc with message type.
Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
So i have created the program for the generation of IDOC.
Upto here picture is clear.
In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
i have done the assignments in we57 and bd51 also.
Now idoc is created in the inbound side with status 70.
but i am not getting how to upload this data in standard tables Mara and Makt.
So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
First tell me what i have done is the right procedure or i have to make somechanges somewhere .
Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt) so that material is created in the reciver side also.i will be very thankful to you.
I am only using seven fields in creating the material.
Please kindly send your answers and not links .
Thanksi have done the same thing and used same parameter in import ,export ,tables and exception tab.
i have written some code also .
But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
in tables.
Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
But how to use the BDC code in Function module , i am not getting.
Please can you send any example of code for this task. -
How to send IDOC with extended message type MATMAS
Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
NikHi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material PR No Item No Quantity
A 00001 10 1
B 00001 20 3
B 00002 10 3
C 00002 10 1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik -
IDoc processing for same message type but diff extensions
Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas -
Idoc Message type and Process Cosde for CJ01 transaction
Hi,
What is the Idoc message type and inbound Process code for CJ01 transdaction?
Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
Thanks.Hi,
All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
Go to se93 and search for BD* and look for the description.
Regards,
Nilesh. -
I have a PLM system that will be receiving Material Master Data from multiple R/3 systems.
I will need to create a reduced message type for MATMAS.
Need confirmation of steps:
1. I create a reduced message type ZMATMAS in the PLM system (BD53)
2. Activate change pointers for ZMATMAS in PLM (BD53)
3. Generate transport request for ZMATMAS in PLM (BD63)
4. Import reduced message type into all the R/3 systems (STMS)
5. Verify distribution models in R/3 systems (BD64)
6. Send material from R/3 systems to PLM system (BD10) using reduced message type
The question I have about these steps is whether I should create a reduced msg type in all the R/3 systems (multiple times) or is it ok to do it one in PLM as described above?
Please let me know if steps are correct?Hi Raynald LaGuerre ,
1.To create a new message type, follow these next few steps:
Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
Choose Create logical message type by double clicking on it
Click on change icon to enter change mode
Click on New entries to add a new type
Enter the required message type
2.WE82--LINKING OF MSSAGE TYPE TO IDOC TYPE(DISPLAY).
Rgds
Sree M -
Tcode to send custom data using custom message type in ALE
I have ceated custom message type and i want to send data to say system B.I wanted to know Tcode to send custom data using custom message type in ALE.
for example:
material data...message type = matmas....tcode = BD10.
like this.
i hope you have got my question.
plz guide me?
regards
mallikarjun mangaloreHi,
Sending data through ALE is not a single-step process. Take a look at http://www.sapgenie.com/ale/. The paper at http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc is a wonderful resource for the ALE process.
Regards -
Ale with user created message type
Hello,
I have a created a segment ,idoc and message type and done the assignment of Idoc with message type also.
i have to send the material 800 to 810 client through ALE.
By using the Standard Message type MATMAS i m getting the material on 810 client.
But when i am using my message type ie ZMAT_MSG in tcode BD10 on client 800 to send the material it is saying error that message type does not exist.
I am not getting the problem
Or it is not possible to use your message type to send the material through Tcode BD10.You have to always use the standard message type MATMAS.
If yes then how to use our own message type to transfer the data from client 800 to 810.
Please reply .
ManishHi Vasu,
Please try this.
1. Create distribution model (BD64) for message type MATMAS_BAPI.
2. Create inbound partner profile (WE20) for message type MATMAS_BAPI and IDoc type MATMAS_BAPI01 and process code BAPI.
3. Create IDoc ports (WE21)
4. Setup RFC destination (SM59).
Hope this will help to start with.
Regards,
Ferry Lianto
Please reward points if helpful. -
Error Message type ARTMAS belongs to BAPI in BD64?
Hi,
when i want to send ARTICLES using ARTMAS Message Type in BD64 ( Customer Distribution Model ) it shows an error message like below
" Message type ARTMAS belongs to BAPI
RetailMaterial.Clone: Use the BAPI in the model "
but i want use ARTMAS Message Type in BD64.
Please can anyone tell me how solve this issue.I found the sloution.
First, for our distribution model we add message type still is "MATMAS", and then we should add BAPI as fllow:
Obj. name/interface: BUS1001001
Method: Clone
We can find these information from table TBDBE.
Try BD10, it can work.
I hope it can help other people. -
Distributing message type MATQM using ALE
Hi everybody!
I am using ALE to distribute material data. This already works. Now I also want to distribute material data for quality management.
When I try to distribute materials using BD10 I get this message:
Could not determine recipients for message type MATQM
So I tried to create a new distribution model for MATQM using BD64. Unfortunately I could not choose MATQM or MATQM01 as the message type. (Error: Message type MATQM01 unknown)
However, in transaction WE60 I can display message type MATQM01.
What is the problem?
best regards
RolandHi Roland,
BD10 only can be used with message type MATMAS.
If you want to send message type MATQM and IDoc type, please use this FM <b>MASTERIDOC_CREATE_SMD_MATQM</b>. You still need to maintain partner profile (WE20) and IDoc Port (WE21).
Other you can use <b>Change Pointer</b> (BD21) to send out and ensure you have activated the change pointer for message type MATQM (BD50).
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Need Message Type Creation Steps for Different Scenarios
Hi Friends,
I have done following steps for Outbound IDoc [Extended IDoc]
1. Create custom Message Type WE81
2. Create custom Segments WE31
3. Create IDoc Extension WE30
4. Create IDoc Type [Basic+Extu2019n] WE30
5. Link Custom IDoc with Message Type WE82
6. Activate CP for Custom Message Type BD50
7. Activate Change Pointers globally Flag on BD61
8. Maintain custom message type in CDM BD64
9. Define partner profile for custom msgtype WE20
After completion of the above steps.
I am unable to do the following steps.
10. Checking the IDoc Creation BD10
or
11. Execute CP IDoc generation Program RBDMIDOC
Here these steps I am unable to find Message Type.
If we create message type thru BD53 [std idoc] it will come.
but my situation is for extended IDoc I need to create message type.
If any one worked on this situation Help me out.
Regards,
Mutyapu4u.
Edited by: naveen mutyapu on Jun 24, 2008 2:51 PMHi,
Check the link below:
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Hope this helps..
Regards,
Sharath -
1 request Idocs created for message type MATMAS
Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSivaMarias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM -
Inutilização de NFe: Log de erro Message type 8 is not defined
Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela MachadoVerifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM -
Message type BOMMAT (change BOM)
Hello Guru,
I have some question and need help, when i try a standard transaction CS02, try to change a BOM material existing for example, the base quantity of the BOM was 650, i enter new data as 655, but suddenly retain the original Qty as 650 and save the changes as SAP will accept the changes i've done (BOM for material 2456 changed) but eventual i have not change any value to the original BOM. SO it mean this is standard SAP funtionality for CS02.
But when we use an interface using message type BOMMAT a standard SAP message tpye, we have created an IDOC using this message type and same data as the original was maintain to it, to be more exact we plan to change a BOM thru this IDOC but all the data we have is the same value of the original BOM, so we expect no error could be encounter of this IDOC since in standard CS02, changing of BOM even same value was inidicated did not had error message encountered when saving.
But thru our process, when we try to process the IDOC with message type BOMMAT in program RBDAPP01 (BD20) the idoc did not pass it when into status 51(Error when saving BOM. Please see the application log.) and when we check the BOM it has duplicate value upon executing the program we able to fix it when we delete the duplicate line segment in the IDOC and reprocess it once again.
my question is why in standard message type BOMMAT had encountered error when processing when we try to make change of BOM even the same value is carried out by the IDOC, and why in standard CS02 saving a change of BOm with same value as it is SAP accept the process? Please help and clear the process.
Any inputs R.Brahamankar and Vivek
Thanks
Edited by: Ryan on Feb 9, 2009 9:23 AMBOMMAT and process code BOMM
Maybe you are looking for
-
I don't know if my settings are not being remembered or what, but the New Tab button is missing each time I open up Firefox.
-
Range Partitioning a table based on day of the week
I have a logging table which i want to partition into 7 partition, each one for the day of the week, eg MON,TUE, WED. I am aware and I can do a list partition by creating a parition key which stores 'DY' of the week and this means that I need to add
-
I use Creative Cloud for teams on two PC's, one at work and the other at home. The programs that are on my PC at work are running just fine and I have nothing to worry about there. However, I'm having an issue with InDesign and Illustrator on my home
-
Why do my mts video files go into final cut pro
from my sd cards and my camera but not if i transfer it to my hard drive then try to pull them off a seagate hard drive or a my book studio that both work for mac
-
Any chance I can recover the photos and other things on iPad after installing iOS7
After installing iOS7, my photos, all apps/games had gone. I can see the photos from a data recovery programme but couldn't recover them. Any chance that I can restore the previous version and recover all the data? I didn't back up as I have change