Message Type in RBDMIDOC

Hi Friends,
when I want to start the report RBDMIDOC it asking me for a message type.
I created a message before and all these things, but I can not find the message type creatred before in the list of message types.
Where do I have to add the message type?
Thanks in advance and best Rg. Jimbob

This program is used to distribute idocs for the message type for which change pointers have been activated. Is your requirement related to Master data distribution using the concept of change pointers ?
Check the link for details on change pointer activation.
http://help.sap.com/saphelp_erp2005/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm

Similar Messages

Error when executing the program RBDMIDOC with Message type HRMD_ABA

Hello All
I finished the integration between CRM and HR
Now I am able to replicate the employees and the organizations, but when I created a schedule job for the program RBDMIDOC and message type HRMD_ABA the system gives me warning and message: no data selected for distribution even if I try to run the program using SE38 I am getting the same error message
I already activated the message type using BD50 and activated the Change pointers using BD61
Regards
Jacopo Fransoice

us the program
RHALEINI

Object type not maintained for message type

Hi,
I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
If anyone has worked on change pointers, please guide me in solving this error.
Thanks
Hari

Hi
Which msg type u r using there.
Regads,
Prasad.

FIDCCP01 Message type FIDCC2

Hello,
I am trying to use message type FIDCCP to create idocs for FI Document posting. However i am unable to see any idocs created. I have configured the system and activated change pointers for FI Documents. My question is does anybody have previous experience with FIDCCP message and change pointers and are idocs created using change pointers for FIDCC2. As when i run rbdmidoc and when i try to give FIDCC2 it says "message type fidcc2 cannot be sent via change pointers. Request you to help in this regards.
Regards,
Shekhar Kulkarni

Hello Shekhar,
you don't need change-pointers.
You must customize the ALE-Scenarion for FIDCC
Best Regards
Anton

ALE - Status 52 Idocs for HRMD_A message type

HRMD_A Idocs in target system are not completely posted, turning into status '52'. Most of the times the infotype 1001 idoc with relations ship P->S arrives before the idoc which has the actual objects(P, S) causing 'Relationship imposible because the object does not exist". We use program RBDAPP01 for inbound processing of Idoc which should take care of Serialization based on the time stamp of idoc creation in source system.
Change pointors for Message type HRMD_A are processed using program RBDMIDOC in source system.
It is unlikely that relationship P->S is created without object P being created in the source system. So the change pointors should create the idocs in the same sequence. But it is not happening.
Any help on this appreciated.

Hi Santosh,
If you haven't found by now the .... here is the Solution:
First change the size of table T77S0 check out note 305688
Then process the IDOCS again - check out note 363187
Regards
Luis

IDoc generation with Message Type HRMD_A with filter on Personnel Area

Hello All,
We are facing an issue in generating IDoc using the standard message type HRMD_A.
When we have no filters on the Distribution Model, the IDoc is generated through RBDMIDOC. When we use the filter on BUKRS, it generates the IDoc but gives an error status "Cross-system company code XXXX does not exist". I know to how resolve this issue. But, we tried to filter the changes with Personnel Area this time. So I have used the field PERS_AREA in BD59 with segment type E1PLOGI. When I run the standard report RBDMIDOC it gives the message "No data selected for distribution".
I have checked the field name PERS_AREA from table TBD10, and it is mapped to T500P-PERSA. Change pointers are triggered and stored in BDCP2. Request experts to suggest what could be wrong with this.
Thanks,
Anil

Hello Michele,
If you have added BUKRS in BD59 for the message type, you will see Company Code (not filter1) in your filter criterion in BD64.
Have you included the following code in FILTER_VALUES_SET method of the BADI implementation.
CHECK OTYPE = 'P '.
SELECT * FROM PA0001
 INTO PA0001 WHERE PERNR = OBJID
 AND BEGDA <= SY-DATUM
 AND ENDDA >= SY-DATUM.
record is valid today, no authorization check
 EXIT.
ENDSELECT.
IF SY-SUBRC = 0.
 FILTER1 = PA0001-BUKRS. ELSE.
 CLEAR FILTER1.
ENDIF.
Lastly, just make sure the record you are testing for has your desired company code PGPB.
Regards,
Anil

Message Type in RBDMIOC

Hi,
I have created customized message type for idoc type MATMAS05. I have activated change pointer in BD61. I have also activated change pointer for message type in BD50. And have made entry BD52.
And I made changes to existing material. I checked in cdhdr table changes have been captured. But when I try to run RBDMIDOC, I am not able to find my message type in available message type list.
Plz help.
Regards,
Pranjali Mode.

I have used the program RBDMIDOC few times. As per my knowledge RBDMIDOC is a standard SAP program and we can run it only for std msg types. So ur custom msg type will not appear in the dropdown. I dont think we can run RBDMIDOC for custom msg types though I am not very sure about this.

Need Message Type Creation Steps for Different Scenarios

Hi Friends,
I have done following steps for Outbound IDoc [Extended IDoc]
1. Create custom Message Type                           WE81
2. Create custom Segments               WE31
3. Create IDoc Extension               WE30
4. Create IDoc Type [Basic+Extu2019n]          WE30
5. Link Custom IDoc with Message Type          WE82
6. Activate CP for Custom Message Type                     BD50
7. Activate Change Pointers globally Flag on     BD61
8. Maintain custom message type in CDM                     BD64
9. Define partner profile for custom msgtype                    WE20
After completion of the above steps.
I am unable to do the following steps.
10. Checking the IDoc Creation                          BD10
          or
11. Execute CP IDoc generation Program     RBDMIDOC
Here these steps I am unable to find Message Type.
If we create message type thru BD53 [std idoc] it will come.
but my situation is for extended IDoc I need to create message type.
If any one worked on this situation Help me out.
Regards,
Mutyapu4u.
Edited by: naveen mutyapu on Jun 24, 2008 2:51 PM

Hi,
Check the link below:
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Hope this helps..
Regards,
Sharath

ALE-IDocs: Issue on COGRP1 & COGRP6 Message Types

Dear Experts,
I need to send the Cost center groups data and Profit Center groups data from one system to other, I had sent this for one time using the tcodes, from now on I need to send only the changed data, so configured the ALE for this.
I activated change pointers generally in BD61 and then activated change pointers for message types in BD50. Cost Center Group (COGRP1), Profit Center Group (COGRP6).
Why is RBDMIDOC program not showing any output when executed with standard message types COGRP1 and COGRP6 ?
It is working fine with other message types like MATMAS, DEBMAS, COSMAS, PRCMAS, CREMAS.
Tcode: BD59: Assignment of Object Type to Message
Tcode: WE30: Develop IDoc Types
Tcode: BD52: Change document items for message type
So, COGRP1 does not have assignment of all the segments that are displayed for the IDoc Type: COGRP01 in WE30. Do we need to assign all these segments and fields to the message type in BD59? If so, how to create this ALE Object Types and what are these table names and fields in BD52., any user exits kind of thing for populating the fields if we do this way?
I am really having trouble and great confusion with this.
I would really appreciate you if you could provide me an answer or a hint.
Thanks in advance for the time you spent on this.
RV

Hi,
You need to follow following steps for the activation of change pointer.
1) Enable change pointer globally (BD61)
2) Enable Change Pointers for a Message Type (BD50)
3) Specify the Fields for Which Change Pointers Are to Be Written (BD52).
BD59 is used to Assign Filter Object Type to IDoc Field. Then you can add filter while creating distribution model.This is used when you have to filter the Idoc at distribution stage. It has nothing to do with the change pointer technique.
In BD52 , you have to assign the change pointer object(this you can find using T.code SCDO), table name and field.In your case change doc object is ALESETS
Just make sure that you are making changes in Cost center groups data and Profit Center groups and then execute program RBDMIDOC.
Regards,
Monika

Inutilização de NFe: Log de erro Message type 8 is not defined

Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela Machado

Verifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM

Message type BOMMAT (change BOM)

Hello Guru,
I have some question and need help, when i try a standard transaction CS02, try to change a BOM material existing for example, the base quantity of the BOM was 650, i enter new data as 655, but suddenly retain the original Qty as 650 and save the changes as SAP will accept the changes i've done (BOM for material 2456 changed) but eventual i have not change any value to the original BOM. SO it mean this is standard SAP funtionality for CS02.
But when we use an interface using message type BOMMAT a standard SAP message tpye, we have created an IDOC using this message type and same data as the original was maintain to it, to be more exact we plan to change a BOM thru this IDOC but all the data we have is the same value of the original BOM, so we expect no error could be encounter of this IDOC since in standard CS02, changing of BOM even same value was inidicated did not had error message encountered when saving.
But thru our process, when we try to process the IDOC with message type BOMMAT in program RBDAPP01 (BD20) the idoc did not pass it when into status 51(Error when saving BOM. Please see the application log.) and when we check the BOM it has duplicate value upon executing the program we able to fix it when we delete the duplicate line segment in the IDOC and reprocess it once again.
my question is why in standard message type BOMMAT had encountered error when processing when we try to make change of BOM even the same value is carried out by the IDOC, and why in standard CS02 saving a change of BOm with same value as it is SAP accept the process? Please help and clear the process.
Any inputs R.Brahamankar and Vivek
Thanks
Edited by: Ryan on Feb 9, 2009 9:23 AM

BOMMAT and process code BOMM

Idoc and message type not getting replicated in the receiver system

Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys B

Hi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens

Idoc message type for open orders & Open JIT lines

Hi,
I need to send Open Purchase Order data and Open JIT lines data to supplier daily via Idocs.
Is there any standard messege type available for this data.
Regards

Hi Rohita,
Instead of changing the standard domain, You have to make the changes in the User Exit.
Say Qualifier 001,002,003 were already there in the domain.
001--Purchase Date
002--Delivery Date
003--Ordered Date
In the user exit u have to just add the segment and the qualifier without making any changes to the Standard Domain.
These Qualifiers are just like other variables and u can add whatever values to them that u want..
You can add Qualifier 004 for Trnasportation Date or Goods issue date and have to communicate the MiddleWare informing that date with this Qualifier will be Transportation Date and they will do the mapping to the corresponding field in other syste.
You can have as many message types as u want for the same IDoc type. There is no harm in having multiple message type. And u dont need to change the standard domain. It can be done without changing the domain.
If u analyse the FM closely u will realise that they have done coding for those values in the domain.
So instead of adding it to domain u just have to do the coding for this new qualifier.
Revert back if u need any help on it.
Thanks...
Message was edited by:
Utsah Garg

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

IDOC Message type for open sales orders

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any message type available for this in SAP R/3 4.7 version
Regards
Anandh

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

Message Type in RBDMIDOC

Similar Messages

Maybe you are looking for