Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
   filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,     
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Similar Messages

  • Inbound Idoc - control record settings

    Hi,
    we have a JDBC to Idoc scenario. We get data from JDBC interface (outbound), map some fields and send it to a receiver SAP system as an Idoc (inbound). We did a similar scenario before and PI filled out automatically the control record settings. So in our mapping to the idoc XML format the must fieds in the control records are set to constant="pi dummy entry".
    It worked for the former scenario well. For this new scenario it doesn't! When i monitor the payload, SNDPOR as example is set with our dummy value of the mapping ("pi dummy entry").
    specials:
    - CC checkbox "Apply Control Values from Payload" is NOT set!
    - The destination SAP Business System is configured as a Party in Integration Directory (not such configurations in SLD)
    - We use PI 7.0
    Any suggestions?
    Thanks in advance
    Michael

    Hi Michael,
    >>So the control record will not be send. I was expecting, that PI the control record data according to the configuration fills. Maybe this is a wrong assumption.
    Yes you need to disable the control record in message mapping, because you want PI to make it at run time based on the configuration done in PI.  So apart from disabling it you need to do some more settings.
    If you have used parties in SAP PI, then select the
    1.Apply control records in IDOC communication channel
    2. Update the Identifier tab in the IDoc receiver channel with the correct information for sender/receiver
    now when you see the IDoc Outbound (in SOap Header) then you will see the correct sender and receiver details.
    Regards
    Suraj

  • Cost center not checked during the inbound idoc FIDCCP2

    Hi all,
    Could you please give any input on this strange issue.
    I am testing inbound Idoc FIDCCP2 (GLVOR = 'HRP1' ) with tcode WE19 and when I fill cost center with value 'ZZZZZ' the system post the FI document and deosn't check the cost center like in FB01.
    With FB01 I have a error message "Coste center 'ZZZZ 'does not exist on 21.08.2014" and cannot post the document.
    Thanks.
    Farouk.

    Try OSS note 114814.
    Regards
    Waza

  • Populating MESFCT and MESCOD in IDOC control record through XI.

    Hi Experts,
    I want to map only MESFCT and MESCOD fields to IDOC control record as i see help.sap.com and all forums this part in XI is very confusing, as mentioned in the below thread i disabled all the mandatory fields(which are in red color)  in the EDI_DC40 and mapped MEDCOD and MESFCT with constants and in IDOC receiver adapter (Communication channel) i have checked the option (Apply Control Record values from Payload) , now i can see both the values MEDCOD and MESFCT  in XI payload, however I'm unable to see them in the target (ECC 6.0) system
    Threads Used:
    /people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
    /people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
    SAP Note : 728792
    Target System
    WE09
    IDOC control record structure.
    Under Typinfo tab:
    Message Varient : <Still Empty>
    Message Function : <Still Empty> not populated from XI payload.
    Any guess ??? will there be any configurations required from ECC point of view to populate these values from XI payload.
    Thanks in advance
    Kelli.

    You mentioned that the payload values are visible post mapping during runtime so ,
    Try to edit the IDoc adapter once again and ensure that
    you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter
    Activate the adapter and try again.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

    Hello,
    the above segment is missing in the inbound idoc - basic type pexr2002.
    I have checked in TC-we30 and its available there.
    but still the idoc is getting generated without this segment.
    can someone suggest.
    thanks
    Arun

    Hi All,
    I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
    I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002  and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
    We have done the following steps:
    - BTE 2441 is available on our release
    - house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
    - entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
    - code maintained in ZXF08U04
    The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
    Can you advise what we might be missing please?
    Thanks and regards
    Mike

  • I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    The solution will be found here, select your computer type and software.
    http://support.apple.com/kb/TS2529

  • IDOC message type LOIPLO not triggering

    Hi Friends
    Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
    So we are using MF50 to firm the planned orders.
    The idoc message type LOIPLO is not triggering.
    How to trigger IDOC message type   LOIPLO . What are the settings we have to do.
    Regards,
    Srihari.M

    dear friend,
    Message Type :  LOIPLO
    Basic Type :        LOIPLO01
    You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
    Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
    Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
    good luck!

  • Received unexpected message type does not match expected type

    1.Two Biztalk Applications A,B  one for sending the request(A) and other application will send the response to A.
    2.I have two schema  Request and Response in Aplication A which i have exposed as webservice.
    3. Application B share the same response schema .
    I am using WSBasicHTTP sysnchronous ports to send and receive the message.
    WHen Application B send the response , i get the error  "unexpected message type does not match expected type "
    but i dont know why i get such error when the schemas are share by both application. Please advice
    Regards
    Suresh

    Hi Suresh,
    Whenever you are doing request-response like calling web service etc, i would suggest to use Passthrough pipeline while sending and use XML receive for receiving the message.
    Because when you are sending the message out it doesn't needs any promoted properties so you can use Passthrough this will avoid extra Assembling/Validation etc tasks performed by XMLSend pipeline.
    But when you are receiving response that time it expects MessageType property to be promoted because normally you will have receive shape configured to some Typed Schema. So you will have to use XML Receive pipeline.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Billing type is not populating table TVARVC

    Hi Expert
    My billing type is not populating the TVARVC table can any body explain whats needs to be done.
    Regards
    Sanjay

    Hi Sanjay,
    There is no such field in the table "TVARVC".I think you may be thinking that type field is for billing type.
    It is not billing type.It is Selection category type.It has two values "S" and "P".
    S means selection and P means Parameter.
    So your billing type will not populate at all.
    Hope this helps you.
    Regards,
    Krishna.

  • When i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in  fault in the computer. try reinstall the program to solve this problem.

    when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in  fault in the computer. try reinstall the program to solve this problem.?????????????????????

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Activate change point for message type - message type FIDCC1 not in list

    I want to set up idoc for sending entire FI documents.
    For this I want to use the change points in the message type FIDCC1 but this message type is not in the list of transaction BD50 (neither if I go via SALE)
    I'm not allowed to add it myself, I get a warning the name is not in the namespace (Zxxx or Yxxx).
    Is there a way I can add this message type in this list?
    -> change points are generally activated
    -> ECC 600
    edit: I see the message type is in WD81
    Edited by: Renaat Vanhaverbeke on Apr 28, 2010 11:05 AM

    I found the solution: when I tried to add the message type in BD50 I got the warning the name does not match the namespace rules. But by opening the Performance Assistant I could start the transacion RDDKOR54 to display the namespace rules.
    By exiting this transaction I got the question if I want to bypass the namespace check and by answering positive on this I could save the new entry.
    PS: I also found that alle message types are defined in table EDMSG

  • Trip type does not exist in the system (T702G)

    Hi,
    In HR - Module - Travel Management.
    I am trying to create a travel request for an employee.
    i am getting the error message :
    Statutory trip type does not exist in the system (T702G)
    how to assign the trip type to a particular employee.
    regards
    sam

    If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
    there in the tri provision variant you need to enter the variant you have created.
    Under that select the travel planning trip schema PL.
    on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    See:
    iOS: Troubleshooting backup issues in iTunes
    Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

Maybe you are looking for

  • Plug-In Failed to Load?

    When I try to run the i phone promo piece, I get this message: The page "Apple - iPhone - A Guided Tour - Medium" attempted to load an Internet plug-in named "QuickTime Plug-In 7.2", but the plug-in failed to load successfully. I've already install Q

  • Firefox is set as my default browser but will not open. I can access other browsers

    Firefox crashed while I was browsing. I re-started the LT and now Firefox will not start. I have tried re-starting from the desktop, the tool bar and the start menu.I can use other browsers which are not my default browser eg Googlechrome. This is no

  • ITunes crashes, no error message in Vista

    When I try to open itunes, it just pops up with a little window that says "Itunes has stopped working" I've uninstalled, reinstalled, and tried all sorts of things suggested elsewhere. I tried running quicktime, to see if that is the problem, and I g

  • .pal vs. .NTSC

    How do I know if I should use a .pal motion template or a .NTSC   What is the difference? Thanks!

  • Still Can't Get BT Sport!!

    I activated my viewing card online, but only get a black picture on Sport 1 + 2.  When I ring tech support they admit there is a problem and then  transfer me, where are I held in a queue forever and eventurally hang up!!  Thought I would try my luck