Message type is not triggered in SAP when PO copied from eSHOP

Hi,
We are creating PO in eShop and sending to SAP.
POs are correctly getting copied from eShop to SAP.No issues.
We have set condition record for Message type to trigger in SAP for those POs as EDI Medium.
No message is getting triggering in SAP.
Whether it is standard one ? or any further enhancement required ? If so please suggest the BAPI.
Thanks

Hi Dhina
What is the application eSHOP?.
for example
In SAP SRM - Technical scenario - Extended Classic.
Purchase orders were created in SRM -EBP and replica of Purchase Orders were replicated to ECC system. In the above scenario messages are created in SRM not ECC.
The PO messages are out puted to vendor from SRM itself.
So please clarify what is meant by eShop. so others can help you further ..
Muthu

Similar Messages

IDOC message type LOIPLO not triggering

Hi Friends
Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
So we are using MF50 to firm the planned orders.
The idoc message type LOIPLO is not triggering.
How to trigger IDOC message type LOIPLO . What are the settings we have to do.
Regards,
Srihari.M

dear friend,
Message Type : LOIPLO
Basic Type : LOIPLO01
You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
good luck!

Output Type is not triggering

Hi,
We have created routine in output determination(VOFM) to trigger the output type (for IDoc) when ever Sales Order is created and we have configured correctly. Access Sequence containes KOMKBV1, KOMPBV1, etc.
When I checked in development system, I am getting values in KOMKBV1, KOMPBV1, etc and it is serving my purpose,
But when i tested same in quality system, KOMPBV1 structure is not getting values and this is not serving my purpose ( i.e output type is not triggering) .
Could any one please suggest me why it is happening.
Regards,
Aditya.

There is no problem with Access sequence
Below are the fields for the accesss sequence.
Sales document type KOMKBV1     AUART
Sales organization      KOMKBV1     VKORG
Distribution channel     KOMKBV1     VTWEG
Division                        KOMKBV1     SPART
Customer group 5        KOMKBV1     KVGR5
Plant                             KOMPBV1     WERKS
The same is working fine in Developemnt but not in quality.
I went to debugging mode while creating a sales order in both systems for checking where exactly KOMPBV1 is getting cleared.
I could find in
SAPMV45A
MV45AF0B_BELEG_BEARBEITEN_ENDE
FORM BELEG_BEARBEITEN_ENDE
Call function messaging
When the program is going in this..... the value for KOMPBV1 is getting cleared in Quality but the same this is working fine in Development...
Hope this coulld help you in understanding the problem better.
Edited by: Aditya K Ghanaria on Nov 30, 2010 4:13 PM

Received unexpected message type does not match expected type

1.Two Biztalk Applications A,B one for sending the request(A) and other application will send the response to A.
2.I have two schema Request and Response in Aplication A which i have exposed as webservice.
3. Application B share the same response schema .
I am using WSBasicHTTP sysnchronous ports to send and receive the message.
WHen Application B send the response , i get the error "unexpected message type does not match expected type "
but i dont know why i get such error when the schemas are share by both application. Please advice
Regards
Suresh

Hi Suresh,
Whenever you are doing request-response like calling web service etc, i would suggest to use Passthrough pipeline while sending and use XML receive for receiving the message.
Because when you are sending the message out it doesn't needs any promoted properties so you can use Passthrough this will avoid extra Assembling/Validation etc tasks performed by XMLSend pipeline.
But when you are receiving response that time it expects MessageType property to be promoted because normally you will have receive shape configured to some Typed Schema. So you will have to use XML Receive pipeline.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Activate change point for message type - message type FIDCC1 not in list

I want to set up idoc for sending entire FI documents.
For this I want to use the change points in the message type FIDCC1 but this message type is not in the list of transaction BD50 (neither if I go via SALE)
I'm not allowed to add it myself, I get a warning the name is not in the namespace (Zxxx or Yxxx).
Is there a way I can add this message type in this list?
-> change points are generally activated
-> ECC 600
edit: I see the message type is in WD81
Edited by: Renaat Vanhaverbeke on Apr 28, 2010 11:05 AM

I found the solution: when I tried to add the message type in BD50 I got the warning the name does not match the namespace rules. But by opening the Performance Assistant I could start the transacion RDDKOR54 to display the namespace rules.
By exiting this transaction I got the question if I want to bypass the namespace check and by answering positive on this I could save the new entry.
PS: I also found that alle message types are defined in table EDMSG

Custom output type is not triggering automatically

Hi Experts,
We have created a custom output type for Delivery idoc processing.
it is working fine for all ship to patrys.
but from last 2 months onwards we are facing problem for one ship to party.
output type is not triggering automatically but for rest of ship to party's it is triggering automatically.
we have maintained conditions and also selected trigger immediately.
earlier it was working fine, but from last 2 months onwards we are facing this problem.
Thanks
Sai

Hi,
Goto the Delivery document and in the Output screen check the Determine analysis for output.
There it will clearly show what is missing .
Please check that and revert back if you need more clarification.
regards,
santosh

What message type to use for syndicating data back to R3 from XI

What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.

Hi Rehman,
You are getting error 51 which means "Error: Application document not posted".
This might because of two reasons:
1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
2. You have assigned wrong inbound function module to post the IDoc.
Please check these cases.
Hope this will help you.
Thanks,
Shiv Prashant Dixit

The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

You really are not getting this.
"I guess I am still completely shocked that as a parent we can't download something for everyone to use."
Why do you continue to think this although we keep telling you that this is not the case.
You do NOT have to purchase anything twice. You can share the music with as many ipods as you like in your household.
The ipods are designed to sync with your computer regularly. You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
Take on of the ipods with the music in it. Open itunes on your computer. Plug in the ipod. Do not sync. Click File>Transfer Purchases This will transfer the purchases from the ipod to the computer. Make sure that you have authorized your account on the computer: here are directions for that. http://support.apple.com/kb/HT1420
Unplug the ipod.
Plug in the other ipod with purchased music. Do not sync. Click File>Transfer Purchases This will transfer purchases from the ipod to the computer.
You can now plug in any of the ipods, select what you want to sync and sync.
Have a look at the manual for the ipod. http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

IDOC message type WMMBXY not including Serial numbers in GR material documents when created with reference to an Inbound delivery

Hello,
We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement material document (and stored in SER03).
Currently segment E1MBXYJ is maintained with the inbound delivery number in field VLIEF_AVIS and Inbound delivery item number in field
VBELP_AVIS. In segment E1MBXYI, no purchase order is assigned and the fields EBELN and EBELP are blank. The movement indicator (KZBEW) has the value 'B'.
Even after making the above settings, the serial number(s) maintained on the Inbound delivery item do not get saved to the material document.I did look at OSS note 833603 (Solution for 2 - GR for Inbound delivery) and we have followed the same settings. This works when there is no serial number in the Inbound delivery. However if we have serial numbers, the IDOC posts successfully, however the material documents in MB03 do not have any serial numbers copied over from the Inbound delivery where the serial numbers are definitely assigned.
Any help you can provide is greatly appreciated!
Thanks,
Ashvin
P.S
If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. This is what we want to accomplish via the above IDoc process.

Hi
Try with enhancement MWMIDO08. See note 833603 - EDI: Goods receipt for stock transport order for further information.
I hope this helps you
Regards
Eduardo

Alert 7055 - Manual Approval Required, XML messages to ECC not Triggered.

Hi All,
I have a behavior in our Client Production System.
We have setup a process in which if a PO confirmation Dates are -5 / + 5 days appart then that line item should result in Manual Approval Required.
Even though a PO line item is in Status "Manual Approval Required" a XML message is triggered and a AB confirmation gets created in ECC.
Issue we faced:- even if the Confirmation Dates are within range still the PO was ending up in Manual Approval specially if vendor enters multiple Schedule lines for the same PO line item with Dates with in +/- 5 days.
In our Test system , we implemented notes given by SAP to fix the above issue the issue looks fixed but,
Now the behavior is if the line item is having Status "Manual Approval Required", NO XML messages are getting triggered for a PO with Confirmation date beyond +/- 5 days. Once the the approval is given and Schedule line is Adopted the XML is getting triggered correctly.
I want to know from all the Experts on to understand which behavior is correct is Production correct(excluding the Bug) or the Test systems not triggering XML unless the Manual Approval is given.
I did read SAP help but i am not understanding since SAP mentions both behavior not Clear when such behavior should occur.
Please help to understand thsi behavior.
Please advise.
Thx
MJ

Hi MJ,
The behaviour in your Test system is correct.
When there is Manual approval is required which means deviation from requested which first needs to be accepted by customer in SNC.
If Purchase order item status is Manual approval required and XML's are getting trigger which updates ECC with AB-confirmation then customer will assume PO is confirmed without deviation until he/she compares requested schedule line and confirmed schedule line.
SAP standard behaviour is also same as your Test system behaviour see the help link(In process point#6)
http://help.sap.com/saphelp_snc70/helpdata/EN/48/1010953b2b3558e10000000a42189d/content.htm
Regards,
Nikhil

Second page not triggering in SAP script

plz help me in this too
The code below is for two pages.
Problem is that...My second page is not triggering.
In the layout
for Fist page
attributes.
page: FIRST
next page: SECOND
for second page
attributes.
page:SECOND
next page: SECOND
REPORT ZNEW1 .
TABLES: MARA.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
ERNAM LIKE MARA-ERNAM,
LAEDA LIKE MARA-LAEDA,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF table ITAB
WHERE VPSTA = 'K'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
*DEVICE = ' '
DIALOG = 'X'
FORM = 'ZNEWLAY1'
LANGUAGE = SY-LANGU
EXCEPTIONS
OTHERS = 1.
call function 'START_FORM'
EXPORTING
FORM = 'ZNEWLAY1'
LANGUAGE = ' '
STARTPAGE = 'FIRST'
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'HEADER'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'WRITE_FORM'
EXPORTING
ELEMENT = 'LOGO'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'LOGO'
EXCEPTIONS
UNOPENED = 4
OTHERS = 9.
LOOP AT ITAB.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2
ENDLOOP.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'FOOTER'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'END_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
OTHERS = 3.
call function 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = 'ZNEWLAY1'
LANGUAGE = ' '
STARTPAGE = 'SECOND'
PROGRAM = ' '
MAIL_APPL_OBJECT =
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'WRITE_FORM'
EXPORTING
ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
call function 'END_FORM'
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
OTHERS = 3.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.

Hi Scientila Choudary,
Your problem will be cleared once you remove start_form and end_form as these are not necessary.we have to use start_from and end_from when we are operating on different forms.Presently we are operating on only no need to use this.
Once your problem is solved please close this.

Output Message Type MAHN not getting picked up in PO

Hello Experts
   I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
Any help is appreciated.
Thanks
Ankit

Hello Tej
I have maintained output device but same result.
Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
Steps for new Message Type for PO Reminder (ZMAH)
1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                    (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
2.     Defined new access sequence Z515 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 1
Table = 026
Description = Purchasing Output Determination: Document Type
Requirement = 103
Exclusive = Yes (box checked)
Access Sequence Number = 2
Table = 027
Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
Requirement = 103
Exclusive = Yes (box checked)
3.     Maintain Output Type ZMAH for PO
General Data
Access Sequence = Z515
Access to condition (Checked)
Multiple Issuing (Checked)
Change Output
Program = SAPFM06P
FORM Routine = ENTRY_NEU
Replacement of Text Symbol
Program = SAPMM06E
FORM Routine = TEXT_SYMBOL_REPLACE
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = External Send
Communication Strategy = 0001 (E-mail Document)
Processing Routines
Transmission Medium = 5 (External Send)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = MEDRUCK
Partner Roles
Medium = External Send
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 3
CType = ZMAH
Name = Output for Reminder
Short Text = Urging letter (expediter)/reminder
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1 (Purchase Order)
Step = 101
Cntr = 3
CTyp = ZMAH
Description = Output for Reminder
Requirement = 103
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZMAH
Med = 5 (External Send)
Funct = VN
Name = Output for Reminder
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Vendor = 101281
Partner Funct = VN
Medium = 5 (External Send)
Date/Time = 4 Send immediately (when saving application)
Output Device = LP01
Cover Page Text = Reminder PO number &EKKO-EBELN&
Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
Thanks
Ankit

URGENT! Idoc Message Type FIDCC2 Not Posting CO Documents

Hi Everyone,
Our company is just about to begin using message type FIDCC2 to post entries through FB60/FB65 and FB50. When you manually enter an entry through any of these transactions, an FI, CCA and PCA document are all created simultaneously. However, when posting an identical entry through message type FIDCC2, only an FI document is created. Why are the other documents not being created and is there something that I am missing from configuration or some sort of trigger that is supposed to create the other entries? Please assist as this is extremely urgent.
Thanks to all that can assist,
Pete

Hi Peter,
Is your company uses any of the profitability segment fields as well? If so how are you updating this information on to the FIDCC2 idoc and how are you generating any COPA document simultaneously. I am in the same situation and my FIDCC2 idoc updates the FI, CO, PCA components but not the COPA. I am not sure where to populae the Profitability segments on the FIDCC2 type. Please share if you have same issues in your company.
Regards
Elphick

Idoc Message Type FIDCC2 Not Posting CO Documents

Hi Everyone,
Our company is just about to begin using message type FIDCC2 to post entries through FB60/FB65 and FB50. When you manually enter an entry through any of these transactions, an FI, CCA and PCA document are all created simultaneously. However, when posting an identical entry through message type FIDCC2, only an FI document is created. Why are the other documents not being created and is there something that I am missing from configuration or some sort of trigger that is supposed to create the other entries? Please assist as this is extremely urgent.
Thanks to all that can assist,
Pete

Hi Peter,
Is your company uses any of the profitability segment fields as well? If so how are you updating this information on to the FIDCC2 idoc and how are you generating any COPA document simultaneously. I am in the same situation and my FIDCC2 idoc updates the FI, CO, PCA components but not the COPA. I am not sure where to populae the Profitability segments on the FIDCC2 type. Please share if you have same issues in your company.
Regards
Elphick

Distibution Model- Outbound parameters for message type could not be found

Hi SRM Gurus,
Have you ever encountered this error while buidling Distribution model in BD64 -
When I try to generate partner profile, I am getting this error-
Outbound parameters for message type BBPCO BBPCO01 could not be created
Partner not found in partner table
This error is occuring for all message types.
Please let me know the solution if anyone has encountered this error before.
Thanks & Regards
Kapil

Hi
Are you geting this error while generate partner profile?
hope your sender and receiver logical system are correct.double check.
VERSION 3
OUTPUT MODE - tRANSFER idoc immediately option
connectivity between both sytems are ok.
did you save modelview ?
now ports automatically created . check we21 ,we20..
check your sm59 rfc destination? what type connection you made ? hope you maynot do mistake. howevercheck itup.
ask basis consultant assistance why ports anot genrated for backend system after you executed
tbd05 - do yo have entry ?
regards
muthu

Message type is not triggered in SAP when PO copied from eSHOP

Similar Messages

Maybe you are looking for