Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Similar Messages

  • Flagging messages as "Not Visible"

    Hi All,
    When monitoring JMS destinations, you can see messsages waiting for delivery. You can even take a look at the message content. In the "WebLogic Advanced Admin" course, they say "Developer can flag sensitive messages as not visible". Can you please provide a little code sample explaining how it's done?
    Thanks

    I think all you may need to do is setup general "browse" restrictions on the queue itself. It may also be possible to set restrictive security permissions on the specific mbean calls that the console uses to view the messages. I've appended some notes that might help. While these notes are focused more on reducing restrictions rather than increasing them, I assume the general steps apply either way.
    HTH,
    Tom
    JMX (mbean/console) Security
    Limiting Access to Monitoring Beans
    Message Management (JMSDestinationRuntimeMBean and JMSDurableSubscriberRuntimeMBean)
    By default, only an administrator can view messages and their contents on the console (because the console uses mbean invocation APIs to view the messages, which require admin privileges).
    The security settings of a protected destination (one with a role requirement for browse, send, or receive) also apply. This means that one would need both the admin role, plus the role configured for the destination. The following is a list of operations that extra security checking is performed at the JMS layer besides necessary MBean level security checking.
    getMessage/getMessages: Browse permission
    moveMessages (from one destination to another): Browse and Receive permission
    deleteMessages: Receive permission
    ImportMessages: Send permission
    If you need finer grained security for queue message management (but not topics), then one option is use a tool that uses standard javax.jms API calls to view messages instead of mbean APIs -- in which case security checks are based on the arbitrary required roles that you've (optionally) configured on the destinations. One such tool might be "HermesJMS".
    Another option is to lower the security requirements on the JMSDestinationRuntime mbean. Be careful, because the message management functions can not only simply view the messages, they also may be able to delete or move messages. Steps:
    1. In the left pane, select Security Realm.
    2. Select myrealm.
    3. In Configuration tab, check Use Authorization Providers to Protect JMX Access, click save and then activate changes.
    4. Restart the server.
    5. In the left pane, select Security Realm.
    6. Select myrealm.
    7. Go to Users and Groups.
    8. In users, create a new user say queueuser, add it to group Monitors
    9. Adding it to group Monitors:
    a. Select myrealm.
    b. Select Users and Groups.
    c. Click on user name, in right pane select Groups.
    d. From Parent Groups, select monitors, click arrow pointing right side.
    10. Go to Roles and Policies - > Realm Policies
    11. In Policy table, select JMX Policy Editor.
    12. Select Global Scope, click next.
    13. From MBean Types, select weblogic.management.runtime
    14. Select JMSDestinationRuntimeMBean click next.
    15. In Attributes and Operations, select Operations: Permission to Invoke.
    16. Click on Create Policy button and save
    17. Click on Add Condition, Select Group in Predicate List, click next, type Monitors, say add. Click Finish.

  • Message processing not visible in RWB Message monitoring

    Hi Experts,
    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
    When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
    Messages are visible in RWB Message monitoring.
    Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
    Thanks in Advacne,
    Seshu.K

    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Check if you have chosen the Status filter as ALL and not "Error".
    If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
    To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

  • Why my account mood message is not visible ?

    hello all,
    I just want to know why my id mood message is not visible ? basically i have 2 accounts 
    so just i added myself in one of the accounts and also then for testing i created 3rd account but in all 3 accounts i am unable to read mood messages on homepage n also when i click on profile i see offline mark instead of mood message why is it so ? can anybody help me ?

    Hi,
    I have same problem! Do you find solutiun?
    Regards,
    Ümit

  • BUG REPORT: Messages often not visible on Galaxy S6 / Skype v5.6.0.12393/534

    Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible.  Thank you! 

    Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible.  Thank you! 

  • I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

    I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • Message types not in BD64 and WE20,but idocs are passing

    Hello ,
    we are facing a strange scenario.
    between two partner systems A and B, 4 message types are maintained.
    Idocs exchange to and fro.
    but in system B, few idocs are visible which are having sender as system A.
    but if i check in system A, these idocs are not sent at all.
    this emssage type is not maintained in either of the partner profiles as well.
    can anyone throw light what is happening ?
    Regards,
    Chaitanya

    solved by restarting

  • Currency Conversion type not visible in the query

    Hi ,
    I created one currency type conversion   Z_INR
    exchange rate type : M
    Exchange rate from infoobject : zexch_rate(key fig)
    source curr from data record
    Fixed target curr : INR
    Variable time reference  : A to Exact Day
    Special info object : Ztr_date (Transaction date)
    it got saved succesfully but wen i try to include  this in the query its not visible there . can anyone let me know why this problem is coming
    help will be appreciated .
    i also included rate and date in the query still not visible

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Document message bar not visible when participating in Shared Review

    Hi,
    I have initiated a Shared Review using Acrobat Pro 8
    Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have the option to check for new comments, publish comments.
    My colleagues however, when they open the pdf file attachment from their email notification they get the message: "This document has been sent by a user of Acrobat 8.0 Professional for your review. To participate in this review Acrobat 8.0 standard or professional, or later, is required" Pressing OK on that message box opens up the PDF file to be reviewed however the Document Message bar is not visible (there is no Document Message bar icon on the left pane either.). Therefore my colleagues cannot publish their comments.
    I also encountered the same issue. After I close my PDF and re-open it, I cannot see the Document Message bar, eventhough I can still see my Review Tracker and the document still listed there.
    So, what did I do wrong? I started the shared review by following the prompts:
    1. Comments > Send for Shared Review
    2. Enable reviewers with Reader to participate
    3. Select a network drive to store the shared comments
    4. Select the document to be reviewed
    5. I've experiment with all the different send notifications options
    6. I specified the email address of the reviewers and sent the invite
    Thanks a lot for the help..

    Does this happen with one particular document or with all your reviews?

  • Mail messages are not visible

    When I open a message in apple mail, the content does not show up. Just the to, From, Title etc. The body of the message is blank. I can sometimes quit mail and relaunch it and see the messages, but not always. It is not consistent with the same message. In other words some messages fail to be visible and then will be fine as others fail. In other words it is not link to any particular mail message, sender or mailbox.
    I can see the first part of message in preview column, but opening the mail comes up white. Sometimes when I forward or reply I can see the string and have done that to read message.
    Most of my business is done via email so an assistance would be helpful and appreciated.
    Is there a way to rebuild a mailbox. I've tried exporting and reimporting the mailbox, but that did not work
    I am running a Yosemite 10,10,1 on a 13" MBP (mid 2010)

    Quit Mail. Force quit if necessary.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens by pressing command-V, then press return.
    A folder window will open. Inside it there should be files with names as follows:
              Envelope Index
              ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • Enhanced Data Type not visible in SPROXY

    Hello experts,
    I've enhanced my personal data type with some extra fields...
    I activated this and the change can be seen in the Message Type and the Service Interface.
    Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
    After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
    What's wrong? Please advice.
    Thanks a lot!
    Dimitri

    Hi Dimitri,
       There should not any problem while generating proxyies again please chek two things in your case
    1.Wether the Activation is done prperly or not.
    2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
      Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
    Thread:
    Re: Simple questions about proxy
    Configutaion guide for checking Proxy connections
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Thanks,
    Ram.

  • JDBC adapter type  not visible in Communication Channel

    Hi All,
    I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
    Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type  not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

    Hi Kuldeep,
    Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
    Check below links also
    https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    Sender JDBC adapter : data read from db but not in PI
    Regards
    K.N

  • Request Type not Visible in CUP

    Hi,
    We are in the process of configuring CUP.
    We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
    Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
    Any clues.
    Regards,

    Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
    Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

  • Output message type not triggered for few POs

    ---PRs got created manually. then PRs converted into POs through background job (me59n).
    ( 25 PRs got created manually with same vendor and pur.org combination then all PRs converted into POs through ME59N. In that 20 PRs had message type automatically but remaining POs haven't got the message type )
    Condition record exists with vendor/pur.org combination.
    and all IMG settings are correct.
    medium is 8 (special function).
    and not able to replicate the issue in quality systems.
    Please Advise.
    Thanks in advance.

    PRs will not get any message type, POs will get a message record.
    How is the situation now?
    Did  you get 20 POs only, or do you have 25 POs where just 20 have a message record?
    In the first case  convert the PR manually to a PO manually and see if you get a message record. You should not enter anything manually, it is supposed to work without entering anything manually because it was meant for auto PO. In case you have to enter anything manually, then this might be an indicator why auto PO could not work.
    if the latter case, then compare a PO with and without message record on the fields that should match with your condition record.
    Do you expect the same message type for all POs, are they all in the same purchasing organisation?
    Read and check what is mentioned in KBA 1829682 - Output type is not determined in Purchase order

  • Eclipse - imported type not visible !?

    I have an import at the beginning of my code but it is underlined and when you hover over it it says imported type ... is not visible. Why? I have added the jar and all other imports work fine. What could be wrong?

    Another thing to look for is to make sure that the class you are looking for is in the Jar file, and not a different one. Like how the JavaMail api has multiple jar files.
    Something you could try is to remove the import, but keep the part of the code where you use the classes from that import, and save the file. When you get an error, right click on the error and select "Quick Fix", and see if it offers the class as an option to add.

Maybe you are looking for