Message type to ALE T880

Hi All,
I have a requirement to ALE the table T880 changes (Global Company Data (for KONS Ledger). Can anybody help me identify if there is any standard message type to handle this requirement. I tried creating a custom view and sending idocs. The data is not getting populated correctly in target systems. The fields are getting shifted by one segment when populating in the target systems eg- Name 1 is being populated to Name 2 field and the same for all the following fields.
Any help is much appreciated.
Regards,
Chandra Kumar
Edited by: Chandra Meda on Sep 3, 2009 11:00 AM

>
Chandra Meda wrote:
> ...I tried creating a custom view and sending idocs...
I don't understand what you exactly did (what message type did you use?), but I feel that you tried to update kind of directly (even though you used idoc technology) the table in the target system, you should neither do that, nor try (instead, use BDC, etc., and all other technologies you probably know, amongst them is also idoc of course if there is a standard one ).

Similar Messages

  • Inbound IDOC error :51 Passed with out Message Type to ALE Layer

    Hi,
    I am struct wtih the inbound IDOC scenario ..XI able to send IDOC but at ECC side it is in 51 red status and the error message is
    "IDOC passed without Message type to ALE Layer"
    Do I need to pass these segment values in Message Mapping? I didnt mapped any MESTYP,SNDPOR,SNDPRT and so on.. disabled these fields...
    Could any one light on this issue?
    Thanks
    Rajeev

    >
    rajeev raj wrote:
    > Hi,
    >
    > I am passing values in MM as below:
    >
    > <?xml version="1.0" encoding="UTF-8"?>
    > <ZPORDCR01>
    > <IDOC BEGIN="Constant">
    > <EDI_DC40 SEMENT="Constant">
    > <TABNAM>Constant</TABNAM>
    > <DIRECT>Constant</DIRECT>
    > <IDOCTYP>ZOrders</IDOCTYP>
    > <CIMTYP>Constant</CIMTYP>
    > <MESTYP>Z_Orders</MESTYP>
    > <SNDPOR>B0009</SNDPOR>
    > <SNDPRT>LS</SNDPRT>
    > <SNDPFC>LS</SNDPFC>
    > <SNDPRN>PD_100</SNDPRN>
    > <RCVPOR>DEV</RCVPOR>
    > <RCVPRT>LS</RCVPRT>
    > <RCVPRN>Dev10</RCVPRN>
    > <REFINT>GB</REFINT>
    > <REFGRP>MTI</REFGRP>
    > <REFMES></REFMES>
    > <ARCKEY>20090909</ARCKEY>
    > </EDI_DC40>
    > <E1PORDCR SEGMENT="Constant">
    >
    > I am forwarding these values in MM... IDOC is successfully reaching in ECC but with 51 error in red... Logical system, post and message types are avaliable in Control record of the IDOC which received wiht errors in ECC.
    >
    > Thnaks
    > Rajeev
    Fill the TABNAME as EDI_DC40 and Direct as 2 (represents the inbound direction) and resend the idoc and check
    Rajesh

  • Tcode to send custom data using custom message type in ALE

    I have ceated custom message type and i want to send data to say system B.I wanted to know Tcode to send custom data using custom message type in ALE.
      for example:
    material data...message type = matmas....tcode = BD10.
    like this.
      i hope you have got my question.
    plz guide me?
       regards
         mallikarjun mangalore

    Hi,
    Sending data through ALE is not a single-step process. Take a look at http://www.sapgenie.com/ale/. The paper at http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc is a wonderful resource for the ALE process.
    Regards

  • Need of message type in ALE-IDOC

    Hi,
    Please tell me need of message type  in ALE_IDOC and its functioning.Also why it is required.Let me know its exact role.
    Thanks.

    Hi,
    Message types (required for sending the data across participating systems)relate to the structure of the data called an IDOC (Intermediate Document).Message types provide the format of the data, which can be exchanged betweenSAP and non-SAP systems. ALE supports over 200 message types in R/3.
    Also check the below links
    http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
    http://www.sap-img.com/basis/types-of-idocs-use-in-ale-configuration.htm
    Thank U,
    Jay....

  • Message types for ALE distribution

    Hi,
    I am working on SRM 7.0. I need to copy the org structure from one client to another. For that I am using the ALE distribution model. Can anyone please let me know all the message types reqired for transferring the org structure.
    Thanks,
    Bhakti

    Hi Masa,
    Thanks alot for your help. The document is quite helpful if the org structure had to be mapped from HR. But, the org structure is to be mapped from another existing ERP. Kindly suggest if there is any document for such a transfer.
    Also, I have found another way to transport the org structure. Hopefully that should work. Once I am done testing for the same, I will notify.
    Thanks,
    Bhakti

  • Message Type problem - ALE

    Hello All,
    I have a ALE requirement to transfer material.
    This I am doing in development client i.e. same server in different clients.
    After this is successful I have to do it with different servers.
    In SALE all the settings are complete. Remote login is also complete.
    Even partner rofile is also generated.
    But when I say Distribute model view it is giving me following error :
    <b>Model view MV01 has not been updated                   
    Rreason: Distribution model is currently being processed</b>
    Kindly suggest why this error is comming.
    Dilip

    Hello,
           The senario is like this in same server one client is having all data & other client is just a client copy without data only config setting.
             I have created new model view & tried but getting same error.
    When I say generate IT IS SAYING
    <b>
    System LOG210 as a partner type already exists                   
    System LOG505 as a partner type already exists                   
    Port A000000018 with RFC destination LOG210 already exists       
    Outbound parameters for message type MATMAS MATMAS05 already exist
    Outbound parameters for message type SYNCH SYNCHRON already exist
    </b>
    Dilip

  • Can we assign same  basic type to  different message type in ALE

    Hi Expert
       can we assign same idoc type to different message type?

    Hi,
    Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP"  both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
    Thanks,
    Asit Purbey.
    Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

  • Regarding Message Type in ALE

    hi guys,
    i was involved in Master data distribution using Message Types MATMAS, DEBMAS and CREMAS but never created a customer specific Message Type that is why, i just want to know in what cases do we have to create our own message type's using we31, we30 and we81 and we82.
    can any one out here help me out by sharing giving some real time scenario's in what cases do we exactly have to create our own message type.
    thanks
    Pavan

    Hi Pavan,
    There is no hard and fast rule that you use standard or custom message types...
    SAP has provided messages for almost all scenarios. If you don't have enough fields in standard messgae type, you can enhance it to accumulate your requirement.
    But if the organization has completetly custom defined system (involving many Z-tables) , we create custom message types...
    As far as my knowledge, we should try to go ahead with standard message types by suppressing unnecessary segments and enhancing existing segments just to avoid Z-objects.
    Regards,
    Audy

  • To know the programme for message type

    Hi experts,
    This is Venkat, I want to know how to know the programme for master type message types in ALE/ IDOC like for customer master -
    SAPLVV01
    Thanks in advance
    Regds
    Venkat

    Any body   have any solution ?
    Message was edited by:
            agrud agrud

  • Problem in Output Message types in PO

    Hi Experts,
    I created a PO of type (ZRTS) and i assigend message type as ALE its working fine and idoc genereted.
    but when i am usign some other PO type its not working .
    Here the Partner is same (VN-Vendor)
    Pls help me ..

    If you have created conditin record for all the document type in MN04 then it should work becuase doc type has nothing to do for printing config.
    this is basically a condition record.
    check your condition record

  • When to add message type to distribution model

    hi
    i am bit confused on when to add a custom/std message type to distribution model. what are the conditions. is that always necessary to add the message type to distribution model.
    thanks

    [http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/add-message-type-in-ale-distribution-model-1192885]
    [http://docs.sun.com/app/docs/doc/820-5014/ggcpd?a=view]
    [http://publib.boulder.ibm.com/infocenter/wtxdoc/v8r2m0/index.jsp?topic=/com.ibm.websphere.dtx.packsapxi.doc/tasks/t_pack_sapxi_Create_a_Destination_Model_BD64.htm]

  • Error in ALE service 29 Could not determine recipients for message type MAT

    Hi Experts,
    While transferring the material using ALE am getting  error 29 ie   'Error in ALE service'  and message is 'Could not determine recipients for message type MATFET'.
    Also i ve recieved the materials with the proper status al the end am getting the above error.
    Kindly help me out.
    Thanks in advance.

    Hi ,
    Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly  in WE20 in sender system.
    Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
    Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
    Regards
    Vikas Chaudhary

  • Any  having the Experiance with message type UTILMD and REQDOC in ALE Idoc

    Hi experts ,
    I am working with SAP ISU ,in ALE Idoc message types UTILMD and REQDOC,
    ver 3.0 and 4.0 ,I got the  almost all necessary details of UTILMD MESSAGE TYPE..but REQDOC is pending.If any one having the format of REQDOC segments and objectypes in SAP ISU please send it to me it will be very helpful to me .
    Regards
    Sarath

    Thak you for the responce,
    Hai Naveen,But i dont have message type or structure for REQDOC ver 3 or 4 .in SAP .do you have that structure for  REQDOC in the  transaction we30 .if so please send me its mainly used for SAP ISU .
    regards
    sarath

  • How to add custom infotype in ALE for HRMD_A  message type

    Hi  Friends-
    Pls help me for our req  we are using HRMD_A  Message Type for  HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type   how i can do that pls let me know ?
    <<removed_by_moderator>>
    Regards
    Meeta &  Glory
    Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

    Hi
    Thanks for your support,
    Pls let me know which steps i should go ?  my secanrio is  inbound side only,
    step 1 )   Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
    step 2) do i need to write some code in BADI also to update information for my custom infotype also  if yes then where and which BADI pls let me know  ? because already am working on one badi HRALE00INBOUND_IDOC for  few validation for incoming data.
    step 3 )  add  this new custom infotype in my standard ALE  filters.
    Pls let me know if am mistaking some where or if  i have to do some thing else ?
    Regards
    Meeta & Glory

  • ALE distribution model - one message type to more than one recipient

    Hello colleagues,
    currently I'm working on an integration project between one SAP system and an e-shop system. The communication is established through IDOCs ( both inbound and outbound ). There is another system ( POS ) which is already integrated
    with SAP via IDOCs also.
       Now I'm facing the following problem regarding distribution of transactional IDOCs ( orders, deliveries, etc. ): when assigning one message type ( for example DESADV - Delivery: Shipping notification ) to more than one external system in ALE distribution model I receive a message alerting that one message type can be send to only one recipient.
    The distribution model is as follows:
    Model Views
       SAP to POS
          SAPDEV ( the SAP system )
             POS ( the external POS system )
                DESADV
       SAP to E-SHOP
          SAPDEV ( the SAP system )
             E-SHOP ( the external e-shop system )
                DESADV
       Well, the system message is clear and I did the obvious: create a complete copy to the original message type and than assign it to the E-SHOP system ( the original message type is already used in integration between SAP and POS ).
    As you can see I have found a workaround already but I think that it comes natural to SAP to communicate with other systems and to exchange same kind of documents to those systems and I can't believe that there isn't a standard solution for situation like this.
    FYI I'm working on SAP ECC 6.0
    Thanks in advance.
    Wish you nice day and successful week ,
    Vladimir

    I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
    The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
    Mark this post as answered so that others can find it useful.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for