Message: Unable to initialize "Read" -Unble to open 'News' sites.

I get a message: (Unable to initialize "Read") after rebooting. I had automatically received the update to Firefox 9.0.1 and my 'News' favorites wouldn't load.
See below.

I have never used it but have a link Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
FIRST try resetting CC 2014 Preferences, Click the icon to start CC 2014 immediately if not sooner press and hold Shift+CMD+Option Photoshop should prompt asking if you want your Mac CC 2014 preferences deleted reply yes.

Similar Messages

When trying to download I get error message unable to initialize installer GUI

I was having a problem with my email in Firefox so I uninstalled it and tried to download it again, hoping a newer version might fix the email problems I was having.
When attempting to download Firefox from the website, I get this installer error "Unable to initialize installer GUI"

Are you saving the Firefox installer to your computer (e.g. desktop)?
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 14.0.x: http://www.mozilla.org/en-US/firefox/all.html

Opening new site in dreamweaver

I am trying to open a new site in dw but I already have an icon/folder for "desktop" under "Files". How can I delte it and only keep the new site folder? Thanks a lot.

Huh?
Are you trying to DEFINE a new site in DW? All you need to do is to create a folder on your hard drive, and browse to and select that folder while in the Site manager's New Site dialog.
Or are you puzzling over the fact that your site list dropdown contains icons for your desktop, local disk(s) and mapped drives? Just ignore them at this moment, and follow the suggestion above.

Dreamweaver Slow To Open New Site

Hi Guys
I have recently installed DW CS3 and everything appears to
work fine except for when I either create a New Site or try to
Manage a Site. When I choose these options it takes over 30 seconds
to bring up the New Site or Manage Site Box.
I checked DW 8 that I still had on my system and that too had
slowed drastically on the Create New Site command. I uninstalled DW
8 in case that was causing the slowdown but made no difference.
I have trashed the Configuration folder in the My
Docs/Dreamweaver 9 folder location but that made no difference.
Has anyone got any idea what could be causing this?
Thanks
David Roberts

I did try the safe mode and didn't work. I did make iexplorer my default and then back again to foxfire and it somewhat worked. It was work not bad (but not as good as before) until I rebooted and it seemed the more I used it the better it became. Go figure :)
Well I just did another firefox update to 4 and it works perfect and maybe even better than before. (or I got use to how slow it was :) )
Thank You for you quick reply and I'm very happy for the new update... So far so good.

Doubleclick opens new site after about 60 seconds delay, IE OK

Specialy long time to upload after clicking on links in Outlook Express

Does this occur in safemode?
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Open new site in same tab?

Every time I open a website it opens in a new tab! How do you open websites without adding new tabs?

You can look at these prefs on the about:config page.
* http://kb.mozillazine.org/browser.link.open_newwindow (1)
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
Some extensions that you can look at:
* Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
* Tab Utilities: https://addons.mozilla.org/firefox/addon/59961
* Tab Mix Plus : https://addons.mozilla.org/firefox/addon/1122

Freezing when opening new site

Hi
This is driving me mad. Im DW8 and recently when Ive been
swapping between my sites in the 'files' window it freezes. Just
stopps and thinks FOR AGES, sometimes it eventually works, after
1/2 an hour or more, sometimes I have to leave it overnight. Is
this happening to anyone else or is there something I can do, Ive
reinstalled which changed nothing. Please help because I need to
get some work done.

Did you install or change anything on your system recently?
If so something else may be causing the problem.
Are you using the Mac version or Windows version? Are you
receiving any errors.
There is a possibility that the site definition file might be
corrupt and not re-caching when you flip between sites. Have you
tried re-creating the site files?
Have you scanned your computer for viruses (I am assuming you
have a program always running in the background if Windows)?
Have you checked your computer for spyware?

Unable to initialize session manager

Hi, We are on BOXI R2 SP3 on IIS and we are using SDK to open reports. We ran 1200 users performance testing and we got just 15 failures with the message.
Error in RetrieveReport Internal Error:Unable to Initialize session manager
When I open CCM using Program filesetc then I use to get same error message :"Unable to Initialize session manager". When I search for the ccm shortcut and launch that then it works fine. Now its totally missing from Program Files>> Business Objects options.
Any idea what is the cause? Not sure if this error is related.

This could be because previously only 512 MB was assigned to each sessions. We increased this to 1024 and we are not seeing this error message. There is a registry entry "WINDOWS" in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\SubSystems.
In WINDOWS Key the value is "WIndows Shared Section=1024,3072,512" We made it to "WIndows Shared Section=1024,3072,1024"
Thanks,

Unable to initialize hdv deck problem

Hi all,
I'm having the 'unable to initialize hdv deck' problem. I am trying to capture HD footage from a Sony HVR-A1E camera. iLink and down conversion are off (like they should be) and I have just captured a HD tape before the problem started.
I don't understand how I could capture HD footage just fine and then without touching any settings (just trying to start capture again) I suddenly get the error message, "Unable to initialize HDV deck. Please make sure a deck is connected and try again."
Any ideas?

Definitely. Shot on HDV, definite difference between the clips I've captured so far (HD capture that worked fine before this is high quality sharp image, where as when capturing in SD, image quality is poor and smaller).
Everything has been filmed on the same camera with no setting changes between shots. Like I said before, I have already been able to capture today in HD just fine, but for some unknown reason (which I don't think is the prefs.) capture will not work. I can 'trick' FCE into HD capture but it gets stuck on cueing tape (even though video is playing fine on camera).

"Unable to initialize video deck" inquiry

I am new to Mac and FCE, so I ask for some slack...
I am trying to get video from my Panasonic AG DVX 100 into FCE.
About my system: IMac 2.4 GHz Intel Core 2 Duo with OS X 10.5.2. I have FCE 4 on this computer, not an upgrade of earlier program, but version 4, straight out of the box. I know FCE is working, because I have edited a hour long project on it.
Here's my issue: With the first project complete, I want to import some new video into FCE and start another project. I connect the camera to the Mac via firewire (the white cable that I bought at the Mac store). When I go to "File" in FCE, I go to capture, and I get the following message:
*"Unable to initialize video deck. You may still use capture now."*
I continue by selecting "capture now." The capture window appears with "preview disabled" on the color bars, "no communication" at the bottom of the window. I hit "capture now" in the bottom right and I get the following message:
*"Attempt to capture video without a video device selected. Please select a video device in your capture presets and try again."*
I can't seem to track down "capture presets" , so that's my first issue. This was not a problem the first time I captured video. While at the Mac store, we plugged the camera into other Macs, but still would not get a signal. On FC, it would recognize the camera for a second or two, then flash the "no communication" error. The Mac folks believed it was a camera video out issue.
Some additional factors:
1. it's not the video output on this particular camera. Since that Mac store visit, I hooked it up to another computer and I could see video. So I'm confident that the camera will send video through this firewire.
2. Back to my original project, I imported video into FCE using this cable and a different mini dv camera (sony). It worked with the Sony camera, but will not work with this Panasonic.
I asked another friend, a MAC/FC/Panasonic DVX 100 guy, and he has never encountered this particular error message. He believes it's some setting within the computer that can be fixed through a software patch.
I would be most grateful for insight into solving what is likely a problem others have experienced. Please keep in mind that I am new to this whole process, and will likely show this thread to the people at the Mac store during my next one-on-one class.
Thank you very much.

David:
Thanks for your suggestion. I did check the firewire to ensure it's securely in place, and it seems like it is.
I did connect this camera and this firewire into a friend's macbook, and the signal was successfully received.
So I don't think it's a "loose wire" possibility. We also checked another camera into my Mac's firewire port, and it was successful.
So for some unknown reason, this particular Mac will not recognize this particular camera.
Again, your insights are greatly appreciated.

Why is it that everytime I try to download Firefox 4 my Adobe reader can't open it because it is a damaged file? Because of this I am not able to download it. Not sure I want to since I see so many other people having problems with it.

I will start the process of downloading Firefox 4 and then get the message that my Adobe Reader can't open the file because it is damaged or sent through an e mail. I was not in my e mail when I tried to download the update. This isn't the first time that this has happened. I gave up downloading updates in the past just because I would encounter this same problem.

When you start the download, are you chooseing Save or Run?

Why i get error for open new file acrobat

my accrobat reader can,t open new file. i have new instal but no change

Besides the version, do you have Acrobat or Reader? These are two different products.

Latest version of firefox is sluggish opening new tab

This has been an ongoing problem on last several updates and definitely intermittent ,but seems worse in last two updates.Mostly when opening new site locations.

See Help > Troubleshooting Information
*https://support.mozilla.org/kb/Using+the+Troubleshooting+Information+page
*Extension List Dumper: https://addons.mozilla.org/firefox/addon/extension-list-dumper/
You can also create a new profile as a test to check if your current profile is causing the problems.<br />
That will allow you to revert to the original profile if it didn't help or you are able to identify the cause.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Unable to open .pdf in Firefox 3.6.8 with Adobe Reader 9.3.3 installed. Error message is "The Acrobat/Reader that is running can not be used to view PDF files in a web browser."

I am unable to open a PDF file in Firefox 3.6.8. Adobe Acrobat Reader 9.3.3 is installed. I get the error message "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a web browser."

You can get that error if there is still an old Adobe Reader plugin in the plugins folder in the Firefox program folder.
C:\Program Files\Mozilla Firefox\plugins\nppdf32.dll
See also http://kb.mozillazine.org/Adobe_Reader

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

Message: Unable to initialize "Read" -Unble to open 'News' sites.

Similar Messages

Maybe you are looking for