Message Variant in R3 , hw is it created

Hi Experts,
                        mine is an idoc to file scenerio, I see in the existing mapping , a perticular field in source idoc structure (MESCOND) is populated with a value , coming from R3. Based on this value some mapping is done.
    So when I went to we20 of R3 , I found out in partner profile , beside message type, thee is message variant,
I want to know , how is this message variant created , in which transaction , , what is its utility ??
Regards,
Arnab.

Hi Arnab,
You can post this message in ABAP/logistics forums, generally Abapers or Functional guys will be creating the message variants. I feel they would be the right people to have a better explanation on it.
Thnx
Pothana

Similar Messages

  • Message variant is missing in INBOUND IDOC.

    hi,
    Any one can help on this issue?
    The sender has confirmed that message variant was filled in outgoing file.
    However, When we received this Inbound IDOC, the message variant is blank.
    I still am confused by two questions:
    1. The function module which insert record into table EDIDC and EDIDD,  is same as the function module which post this IDOC to sap module(normally we maintained it in WE57)
    2. We normally need to maintained in WE57, but also need create one processing code,  what is relationship between WE57 and processing code(WE42)

    Hi,
    Message Type/Message Variant needs to be maintained in WE20 ( Partner Profiles). In case of inbound IDOC ( receiving the data other systems) Data processing/posting will happens via function module. the function module will attach to the process code.
    Process Code : The IDoc interface uses the process code to find the business process which controls the conversion of the IDoc into the SAP document.
    The Process code will assign to the function module in WE42, the same function module will assign to the Message type and Idoc type in WE57
    In a short summary, The Function module required to post the Idoc/update the data in SAP. However the Function module should process specific to the Message type and Idoc type only. It means the settings is required to identrify the correct function module to process the Inbound Idocs.
    Whenever there is a problem with ALE setting the message 64 will trigger, it means the IDOC is ready to transfer to the application ( process through FM ). 
    Thanks,
    Kiran.

  • Idocs: BD20 Authorization Message Variant and Function Message

    Hello Experts,
    I have one question about BD20 authorization.
    I'm creating  Idocs filling Message Variant and Function Message with specific values.
    Users themselves are going to run the BD20 to process  those Idocs. To control this, i want do some authorization about Variant and Function parameters  so the can run only idocs with the variant and message function I specified.
    There are any standard authorization object about  those parameters 'Message Variant and Function Message' that i can use to fix this issue?
    Thank You in advance.

    There are any standard authorization object about those parameters 'Message Variant and Function Message' . So, we developed a specific program with a specific authorization object  to fix this issue !!

  • Why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message

    why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message?

    Hey Rkbethel
    There are two ways to resolve this for you. For the first is go and do a Reset All Settings by going to Settings > General > Reset > Reset All Settings. It will not delete anything on your iPhone, but it will put all settings back to default. If it does not work, the next step would be to restore the iPhone back to factory settings.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • Need to add Message variant field in BD87 selection option

    Hi Friends,
    We have a requirement to add "Message variant" field in BD87 selction screen. Our technical team is doing analysis from there end. Mean time we came to know that the field can be added through report variant in customiziting. If anyone know how to add the additonal field thorugh customization Please guide us also please pro.

    Hi Jaheer ,
                     If you talking Abuot heading in out put screen then use TOP-OF-PAGE
    or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
    What I understand from your Question....
    Souman

  • I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    The first time I attempted to install ML was on a late 2011 MBP.  It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error.  I was using the original ML install app, not a USB or other drive.  
    After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps.  I closed apps  manually a few times to no avail.  I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it.  The install went smoothly after that. 
    I since installed ML in two iMacs using a cloned copy of the install app on a USB drive.  This time I shut down the computers and booted into Safe Mode first and there were no problems. 
    I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
    Jay

  • I get this message "can not read because it was created by a newer version" I restored twice at different dates, uninstalled and installed again.. But nooo still there.

    I get this message, "can not read because it was created by a newer version" I restored twice at different dates and uninstalled all apple stuff and reinstaled it again. Still nothing   Help John

    That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • XML message mapping considering idoc message variant

    Dear Experts,
    I am very new to PI. I am working on a scenario where I need to map VGON_OUT xml message from SNC system to ORDRSP.ORDERS05 inbound idoc of ECC 6.0 system.
    The issue is :
    In the inbound partner profile in ECC there are two ordersp message types. one with message variant SMI and another without any message variant.
    Both of them are using different process codes for processing.
    So my question is how to map the VGON_out xml message in PI?
    Please note: the key difference is the idoc message variant.
    There is no way to merge both of these message types as their function is serving two different purposes.
    I have attached the xml file and the screenshot of the partner profile here.
    Any suggestion or reference link or document would be deeply appreciated.
    Thanks in advance.
    Praty

    Hi Pratyusa,
    Did you try with different partner profiles for each ORDRSP?
    Regards,
    Krupa

  • Message no :amoc001 the system couldnt automatically create a transfer docu

    hi,
    message no :amoc001 the system couldnt automatically create a transfer document
    hi all when i follow the steps in this link Message no. AMOC005 i just end up with the problem above
    when i tried to change the business area normally the system automatically transfers the amount. but in this asset und. const.
    i got this error the system couldnt automatically create a transfer document

    Dear Friend,
    SAP clearly says in the long text of the error message that it is not possible, please transfer to new assets, please see the long text as under:
    NA AMOC001
    Short Text
    Automatic transfer is not possible for asset &1
    Diagnosis
    You changed assignments to organizational units for asset . The indicator for 'time-independent organizational units' is set for this company code in Asset Accounting Customizing. This means that the system is supposed to create a transfer document automatically.
    However, asset  manages one of the following:
    Open items
    Investment measures
    Down payments
    Therefore, the system could NOT automatically create a transfer document.
    System Response
    The master data change is not saved.
    Procedure
    If you want to change the assignment of asset  to business area or cost center, you have to manually transfer the asset to a new asset master record.
    Hope this will resolve your issue.
    Thanks & regards,
    Murlidhar Khatri

  • EDI: Partner profile inbound not available - message variant

    Hi Friends,
    I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
    I checked to partner profile and it is correctly maintaind .
    One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
    give ur suggestions.
    Thanks........

    Hi Kiran,
         Check your Partner Profile Message Settings in we20.
         [Error: "EDI: Partner profile inbound not available";
    Regards,
    RajeshKumar.D

  • When i go on to hotmail on my iphone 4s i am unable to view messages in my subfolders which i have created. When i go on to my laptop and go to hotmail i can see them there. Please help

    When i go on my iphone 4s and go to my hotmail I cannot see the messages in my subfolders which i have created, however when i go on my laptop and go into my hotmail the messages can be viewed there. i have seen some discussions and solutions on how to view them so I tried adding an account being the microsoft exchane i put in the required info and it tells me it cannot create account that an identical hotmail account already exists... i may have done something wrong the first time i tried and somehow it has my info but nothing has worked...Please help me.

    Delete the account from you iPhone first (Settings>Mail,Contacts,Calendars>tap the account, tap Delete Account), then try setting it up as an Exchange account (see http://www.howtogeek.com/howto/32784/sync-hotmail-with-your-iphone-or-ipod-touch -with-exchange-activesync/).

  • I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create

    I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location  /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Question!hi!i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

    question!hi！i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

    Peruse the hits from a google search for recovery system can't be created site:apple.com

  • Error message: Helvetica Medium outline font missing when creating PDF's

    Error message: Helvetica Medium outline font missing when creating PDF's. Where can I downlaod it and why is it suddenly happening?

    OS? Version of ID?
    This means that either you have an extra Helvetica Medium font installed and it's interfering with ID finding the T1 version, or the T1 version is damaged. I found this really old thread that explains it fairly well: http://www.asadesigner.com/22-indesign/2d812de56777cc90.htm
    The good news is that it's probably only affecting the page information marks.

Maybe you are looking for