Message: Webcam is etiher disabled or has failed

Hi everyone.
While I was warking on my laptop, I disabled camera assistant software because I was disturbed with costantly opening sidebar when I scroll over it.
Later, I want to use my webcam, but couldn't.
I thought, that if I uninstall and re-install webcam software, the problem will gone, but it didn't.
Now I'm getting message: Webcam is either disabled or has failed!
How can I again enable my webcam?
Please.

Hi
It would be interesting to know what notebook do you have?
Secondly: how did you disable the camera assistant software?
Usually the webcam software should be found in All Programs -> Toshiba
Can you start the webcam software form there?
PS: in msconfig -> Start up tab you will see all applications which would be loaded while booting windows.
Is the webcam software enabled?

Similar Messages

HT6001 I have tried numerous time to update iTunes to Version 11.1.4. Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found". Also I get a message of "Error 7". Advise please.

I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.

For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

"A Connection to the server has failed" Pop up error message.

Hi All,
We have build Oracle ADF application in which we are halted with pop-up error message "A connection to the server has failed" whenever we entered apostrophe (') in input text field all other special character are acceptable except ('). Please advise how we can get rid of this error.
Thanks,
Abhishek

Hi,
Not really my area but generally if you have an 'unusual' username required (like one that starts with a number etc) it's generally rejected by oracle. However if you surround it with double quotes it will work OK. Can you somehow incorporate this into how the adf app is connecting (wrap the username in double quotes)?
Another approach would be to just have some form validation which rejecting any ' characters before it tried to even do a login and gave a nice friendly message saying 'dont use apostrophes'?
Regards,
Harry

A CPIC function has failed

Dear All,
I am getting error log in sm21.Please guide.
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                   Date : 04.09.08
04:55:27 DIA 000 600 BASIS             R49
Details
Recording at local and central time........................ 04.09.2008 04:55:27
Task................ 06664 / Dialog work process No. 00
User................ BASIS
Client.............. 600
Terminal............ 192.168.
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K    SAP Web AS Problem
Development class... STSK
Further details for this message type
Module name......... thxxcpic
Line................ 3582
Error text.......... 027242
Caller.............. ThCPICS
Reason/called....... CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find
more detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm.   (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up R/3 conn.
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
Errors in the CPIC interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
Technical details
File................ 006117
Position............ 0000025380
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R4 9
Variable parts...... 027242                                ThCPICSCPIC-Erthxxcpic3582
Thanks,
Kumar

Hi An
In the disp log. i have read note 124562 .
ERROR => DpRqCheck: T132 in stat TM_SLOT_FREE [dpxxdisp.c   5754]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c   4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3168): [dpxxdisp.c   4572]
-IN-- sender_id ICMAN             tid 132   wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_DP        uid 13629   appc_ca_blk -1      type NOWP
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 8195
-IN-- req_info DP_SOFT_CANCELDP_ICM_EVENT
ERROR => invalid MPI handle: 0 [mpixx.c      2201]
ERROR => invalid MPI handle: 0 [mpixx.c      2201]
SoftCancel request for T63 U13628 M0 received from ICMAN
ERROR => DpRqCheck: T63 in stat TM_SLOT_FREE [dpxxdisp.c   5754]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5144): [dpxxdisp.c   4572]
-IN-- sender_id DISPATCHER        tid 63    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 13628   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         0       rq_id 8199
-IN-- prio      HIGH
-IN-- req_info DP_SOFT_CANCEL
Fri Sep 05 07:49:57 2008
DpHdlDeadWp: restart wp (pid=3172) automatically
DpHdlDeadWp: restart wp (pid=3252) automatically
Thanks,
Kumar

What do i do now? The licensing subsystem has failed catastrophically

I have cs3. When I try to open any of the programs I get error message that says " the licensing subsystem has failed catastrophically. You must reinstall or call customer support." Customer support says there is no phone support for this product and chat told me they can't help with it either. ok.....so where do I go for the support? all I wanna do is use illustrator.

vroom,
Have you tried to reinstall using the full three step way?
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
I have no clue whether that will help, but if it fails I will alert a forum staff friend.

A connection to the server has failed. (status=403) error

Hi,
I have created an application with ADF security. When a user is redirected to the login.jspx page, if he clicks on any tab on the menubar(each of which are different jspx pages), it throws a pop up with the following error message-
"A connection to the server has failed. (status=403)"
Can someone please tell me where the problem lies.
Regards
Apoorva

Hi Apoorva,
When there is no welcome page defined in the application's web.xml file you can get a 403 error.
Also note that when an user has not been authenticated yet, should not have access to any secured pages, any navigation component on the welcome page that points to a secured page. So if that's the case, any component that points to secured pages should be hidden.
For further information you can take a look at the document available at http://docs.oracle.com/cd/E14571_01/web.1111/b31974/adding_security.htm#BABDEICH
Hope this helps.
Thanks,
Cris

"Terminal Script has failed" for RoadRunner Dialer

I would like to use Dial Up service on Time Warner Cable RoadRunner when travelling. I've downloaded the RoadRunner Dialer program and have talked to RoadRunner Tech Support several times because I can't connect and continue to get this error message:
Internet Connect
The terminal script has failed. Please verify your settings and try again.
Any suggestions or ideas for me? Thanks!
600 MHz PowerPC G3 Mac OS X (10.4.6)

I can't say exactly what is big binding because it depends on combination of factors: how fast your machine is, how big the Excel model is, how many components you have etc. Generally if you have bindings with several thousand cells it's going to cause the timeout problem. The problem is that we use Flash player in the application, and if some operation takes longer than a minute it times out. So, if getting data from the big bindings took too long, the flash player stops the operation and you have this timeout error.
You see the timeout error only if you have debug version of Flash player installed. If you have release version installed, you don't see any erors, but you notice strange things, for example selecting component on the canvas does not cause property sheet to display. Release version of Flash is faster, so you can try to remove debug flash player and install release and there is chance that it will work.
FP1 version is going to include some optimisations to reduce this problem and allow working with larger files.
Margaret

Error message: "Webcam driver open fail" for Satellite L305-S5875

Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
Computer: Notebook Satellite L305-S5875
OS: Windows Vista
In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times. I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
I called Customer Support and John, although very nice and patient, was not helpful. He said he'd research and call back. Didn't.
I've gone to Chicony website to try to find an more current driver than January 07. When I let Windows install the latest from the web, it installs a Microsoft 2006 driver. I don't think it's a hardware issue, as it started acting up after Skype installed. I also tried System Restore, but that didn't work either.
Suggestions?
Thanks,
SteveCo

Thanks Jerry. I spent hours going through the links you provided and tried some of the suggestions looking for a solution. Nothing worked.
I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager. Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page. After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
The webcam used to work, before we installed Skype and used it a few times. From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue. Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
Open for suggestions.
SteveCo

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.

Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?

Satellite A200 - WebCam issue - webcam drives has failed

Hi,
I need some help regarding the integrated webcam of my Satellite A200.
Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.
I have downloaded an updated webcam driver, but nothing.
Can anyone give me an idea of what is going on?
Thanks!

Ok - I've had the same problem:
"Everytime I start the laptop I keep receiving a message saying that the webcam driver has failed to load and I have to restart the computer"
Same when trying to update driver from Toshiba site, same when rolled back / uninstalled drivers, then re-installed default drivers. Nothing worked.
Sorry - but the solution that worked for me wasn't easy.
I had to disassemble the laptop to take a look - fix something else ( wireless on/off switch had broken / jammed in off position - lugs had snapped on back of the slider switch on the case, but no problems, I just left it in "on" position, as wireless can be switched off in software anyway). I decided as I'd got that far already, to pull the laptop completely apart and clean it out properly.
There's a shielded cable running from the webcam in the lid, though to a small white socket on the motherboard, accessible under the keyboard, next to the wireless board.
I was disconnecting various other cables etc, and came across this one disconnected, and couldn't remember disconnecting it myself. Hmmmm...
Anyway, I connected it back up on reassembly, it pushes in to the socket and seems seated, but needs an extra little push to "snap" securely in place.
My guess is that some of these haven't been seated properly ex-factory. They probably work just fine, until perhaps through repeated flex on the back of the keyboard when typing, or opening and closing the lid, the connector falls out of the socket.
Anyway - my webcam works again now. (using Vista SPII and all current updates, but in my case that's not relevant, as it was NOT a software or driver issue).
There's instructions (with pictures) for disassembling the A200 on the net - use google to find them. You don't need to pull it completely apart, just to the point where you can get the keyboard out, then you can access the connector.

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

TS2446 i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, what is the problem? what can i do ?

i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, i creat a new password and still that message shoes ,what is the problem ?can you help me please???!!!!

If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

TS3694 I tried to update my itunes and now can't get into it at all. I got a message that says"This application has failed to start MSVCR80.dil and another message that says,"Reinstalling this application may fix the problem." I need someone to talk t

I tried to update my computer itunes program and it failed several times. First of all I had a message that sdi choose "tools and then download manually." I did and then everything got even worse. I got a message that siad, "This application has failed to start...MSVCR80.dil...Reistalllation may fix th problem."
I finally just backed out of everything and then got a message that said, "Itunes was not installed correctly. Please reinstall...Error 7 (Windows error126).
I need a tech person to call me and help. I don't have a clue what to do. I'm a musicain and all of my using is on itunes on my computer...I want to cry...I can't open it...is ti gone!!!!
Lori

Got the same problem. It seems it is happening all over the place with the i-tunes update.

Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem. I've done it several times and still get the error. I'm fearful I have lost all my music. What can I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

Message: Webcam is etiher disabled or has failed

Similar Messages

Maybe you are looking for