Message when opening BEx Analyzer after an upgrade to 3.5

When I open BEx Analyzer after an upgrade to 3.5, I get a message:
Internal Error when generating the history. Use a different view
Is this because it is the first time I am logging onto BEx after the upgrade or is this an issue? Thanks

Niten,
As A.H.P suggested what version of BW did you upgrade from ? and what version of SAPGUI are you using - try and reinstall SAPGUI or install SAPGUI6.40 final.
Also please give your front end support pack levels. This could also be due to a front end SP issue.
Some other things that could help would be :
Were there any problems / issues when upgrading ?
Arun
!!!! Oops looks like I posted at the same time as you!!!!
Message was edited by: Arun Varadarajan

Similar Messages

Issue opening BEx workbooks after 720 upgrade

Hi Gurus,
We use a custom web template to leverage BW [BW-ABAP] security over the Portals [BW-JAVA]. In other words we do not need to create iViews in Portal for each BW Query or BW Workbook.
Earlier we were using 710 GUI with BI 70 Add-on. Now we are upgrading to 720 GUI [patch 5] with BI 70 Add-on [patch 400].
Now when I launch BEx workbook via the Portal, it launches Excel with the BI 70 Add-on [under Excel Add-Ins tab] and then it launches the SAP GUI screen with a success message "No authorization to change role abc. Message no. S#423". The BEx Toolbox connection icon [right besides the yellow question-mark] shows disconnected.
This happens even when I try to launch the BEx Analyzer directly from Portal.
Any help or guidance is heartily appreciated and I promise to award points.
Thanks and regards,
Pratik

Hello,
Please apply these 2 Notes and check again.
1476882
1180683
Regards,
Michael

Not able to open BEX Analyzer after Executing RRMX Tcode

Hello All
My operating system is Windows,
Whenever I start system pop up comes path is
c:\program files\SAP\internet graphic server\bin\igswdserv.exe and it does not close. when I try to close one more grafic window opens.
After stearting the console all tcodes are executable in my BI system but not able to run T code RRMX.
Can anyone help me out to execute T code RRMX and how to close above window.
Thanks

Sure...
I think if you go thru transaction SNOTE, you can download and see a PDF of a KBA.
But I always access via market place (which is exactly the same steps of SAP notes):
https://service.sap.com/sap/support/notes/<note number>
or
https://service.sap.com/notes and seach with the KBA number.
Cheers!
Edward

Error when starting Bex analyzer

Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontus

hi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls.

Problem-taking a long time to open Bex Analyzer

We upgraded from BW 3.1 to BI 7.0 SP9, Front End SP 9, Patch 3, Revision 370 and have a problem when we try to access Bex Analyzer. The response time is very poor. It can take as long as 3 minutes (or longer) for Bex Analyzer to open after we click on the Bex Analyzer option. When we were on BI 7.0, Front End SP 7, the response time was better but since upgrading to FEP 9, the time to open Bex Analyzer from our PCs is very long. Has anyone else experienced this problem? If so, how was it resolved? Thanks

You might want to trouble shoot with web log from BINW2004s forum topper and Front end Champ Prakash ...
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4087">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4087</a>
Hope it Helps
Chetan
@CP..

Error when opening BEX!

Hi guys,
We have just installed the 710 GUI and when i try to open a Query in BEX or even the Query designer i get the following error: "RSOBJS 170 serious error occurred while reading history folder". When i click on ok it goes to 3.x and says "opening 3.x workbook for upgrade" and comes up with various message popups; Problems while ready query metadata for query: SAPBEXq0002.
Please does anyone have any advice on how to resove this issue? Thanks, points will be given.

Dear all,
we have also received a similar problem. When starting BEx Analyzer this error appears sometimes ... curiously, it does not always appear, but only when Excel has been opened before enabling the Analyzer-AddIn.
It would be great if anyone has a solution for this.
Best regards.
T. Duong

Error when launching BEx analyzer from Portals

BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.

Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
●      Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
           test
           Data=BX2,CONAJP,EN,mikoyan,17,,,250,
           9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
●      The Transaction Code for all workbooks is RRMXP.
●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.

Error Message when open iTunes -42032. What can I do?

Error Message when open iTunes -42032. What can I do?

Try 2 solutions: 1. Press both Ctrl and Shift keys then double click on ITunes. Hold keys down until a box appears on screen indicating ITunes is starting in "safe mode'. left click on 'continue" and ITunes will run without closing.
2; Start ITunes normally, then after loading, choose "Match" and then touch "stop" beforre step 3 , Uploading songs...", runs for more than a few seconds. The code problems are in Match; the uploading function in Match. ITunes won't crash if you stop Match soon enough!

Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0

Problem
Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
Full message
Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
Actions
Updated Windows RT 8 to 8.1
Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
Additional Information
The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
Any ideas?
Thanks & Regards
Jim

The user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing" how do I repair? downloading latest virsion of itunes doesn't work

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing. Downloading the latest version does no fix the problem

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.

Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Error message when opening a document "this document is being used by another user

error message when opening a document "this document is being used by another user, do you want to make a copy?
I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
Any suggestions?

Hello MrNeuf,
I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/TS1920
Cheers,
Allen

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Error message when opening FF: can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined

I can click ok and firefox will open, but it's still odd... I get the same message when opening any kind of pop-up window.

This issue is most likely caused by a McAfee extension that isn't working properly and you will have to disable the extension that causes it.
You can also check if there is an update available from McAfee that fixes this problem.

Message when opening BEx Analyzer after an upgrade to 3.5

Similar Messages

Maybe you are looking for