Message when opening VI "LABVIEW: VI not loadable

I am receiving a message when opening my VI: "VI not loadable".
     The message box is attached in a Word document.
     The VI is also attached.
This VI was working this morning.
   It uses DAQmx to acquire data from 3 load cells.
   The data was displayed using a dial and numeric indicator for each channel.
    Then I added a waveform chart to the front panel.
     The chart history was at 1024. The chart worked, but the history was too short.
     The VI was shut down.
An hour later:
    I opened the VI and changed the chart history length from 1024 to 2100000000.
    The Vi was closed without testing the VI.
The next time I tried to open the VI, I got the message the VI was not loadable.
   The message also said "Could not load the default data".
Did I cause the problem by entering a huge number in the chart history length?
If I can't open the VI, how can I begin to fix it?
The VI is not an executable.
The VI has been opened on only one computer.
I am using Labview 8.0.
Thanks,
Bill
Solved!
Go to Solution.
Attachments:
VI not loadable.doc ‏26 KB
NC Zulu Wire Movement.vi ‏131 KB

Hi Kevin,
You were right. It is an issue with not having enough memory.
The problem was caused my me and my haste to close the VI and ignoring the messages.
Here’s how I recreated the problem using a different VI.
     Open the attached VI
     Change the chart history length to 2100000000.
     Save the VI.
     Run arrow goes from solid to broken. (I missed this the first time it hapened)
     The error list says “You must make more memory available for LabVIEW to generate the code for this VI.”
Exit Labview
At this point, a popup window says an error has occurred and Labview will be shut down.
Thanks for your help.
Bill
Attachments:
Data Acquisition .vi ‏365 KB

Similar Messages

Getting this message when opening CS4 illustrator "could not complete the requested operation"

Afternoon all, Simply put someone in my art dept is suddenly getting this message "could not complete the requested operation"
when trying to open CS4 Illustrator. I am running Windows 7 Professional 64bit. CS4 is completely up to date. And Photoshop and other applications are working as they should. Have restarted, Tried moving the Users\Appdata\Roaming and Local\Adobe\ Folders to the desktop but it didnt help. Any and all suggestions would be greatly appreciated.
Thanks AaSib

Thanks for the suggestions. Tried them all this morning and none of them worked. I
have decided to deactivate, and uninstall/reinstall. Hope
fully that will work. Again thanks for the help.
Well I deactivated and uninstalled. Ran the cleaner, and Illustrator is still not working. Going to try a system restore within windows 7 to see if something could have messed with the program.
AaSib

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.

Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

Hi
Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
Thanks
Colin65

Steve,
Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
Also please find details of storage devise,
Dogcam Portable Media Center PMC-500r
Quick DetailsModel Number:PMC-500R
SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

What is the file?
Where did you get it from?
Allan

Error message when opening a document "this document is being used by another user

error message when opening a document "this document is being used by another user, do you want to make a copy?
I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
Any suggestions?

Hello MrNeuf,
I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/TS1920
Cheers,
Allen

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Error message when opening Photoshop CC

For the last month, I've been getting an error message when opening Photoshop CC that says:
"Could not load actions because an unexpected end-of-file was encountered"
I've been having to go back and use CS5 in order to get anything accomplished between this and my plugins not showing up (post about plugins in another thread).

See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

I had to reinstall CS4 and now have error messages when opening bridge and photoshop

The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

I tried what you suggested and it did not help. whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again? If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close. If I click no, photoshop and bridge will open but it will not let me open a raw format document. It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed. do you think I should try to uninstall and re-install Photoshop again?
Date: Mon, 3 Sep 2012 19:48:31 -0600
From: [email protected]
To: [email protected]
Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
    Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
    created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Go To Help->Updates and install the latest update. It should work.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0

Problem
Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
Full message
Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
Actions
Updated Windows RT 8 to 8.1
Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
Additional Information
The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
Any ideas?
Thanks & Regards
Jim

The user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

I get the following error message when trying to sync "could not be synced because the sync session failed to finish"

hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

There is a message when opening safari to contact apple at 1-800-680-0697. is this a legitimate phone number?

there is a message when opening safari to contact apple at 1-800-680-0697. is this a legitimate phone number?

No. This is a scam. Please don't follow the instructions.
Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
Turn off Wifi. Click Wifi icon in the menu bar and select “Turn Wifi off”.
Visit another website.
You won’t have internet connection.
Turn on Wifi. Click Wifi icon in the menu bar and select “Turn Wifi on”.
Select your Network.

Mac Pro accessing SMB shares on a windows server. After being left on all night, the MP gets "file unavailable" messages when opening files on the share.

Windows Server 2003 accessed by several PCs and Macs without previous incident. This one Mac Pro after it's been left on all night (running jobs, or just left idle), and a user tries to reconnect to an SMB share, can go to Finder, Go, Connect to Server, enter the Server info as normal, login as normal, view the directories and files as normal, but as soon as they try to open anything they are given one of the following messages:
"Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, \ /). (<filename>)" - when opening a word document
"<filename> could not be found. Check the spelling of the file name and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure that the file has not been renamed, moved, or deleted." - when opening an excel spreadsheet
Note that these messages are popping up AFTER the user has double-clicked on them to open them. So the files are certainly there and correctly named (and contain only letters, numbers and underscores). After restarting the Mac Pro, the error messages are gone and the files can be accessed without problem. Would like it so that they can connect to the server without having to restart every day.

Windows Server 2003 accessed by several PCs and Macs without previous incident. This one Mac Pro after it's been left on all night (running jobs, or just left idle), and a user tries to reconnect to an SMB share, can go to Finder, Go, Connect to Server, enter the Server info as normal, login as normal, view the directories and files as normal, but as soon as they try to open anything they are given one of the following messages:
"Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, \ /). (<filename>)" - when opening a word document
"<filename> could not be found. Check the spelling of the file name and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure that the file has not been renamed, moved, or deleted." - when opening an excel spreadsheet
Note that these messages are popping up AFTER the user has double-clicked on them to open them. So the files are certainly there and correctly named (and contain only letters, numbers and underscores). After restarting the Mac Pro, the error messages are gone and the files can be accessed without problem. Would like it so that they can connect to the server without having to restart every day.

Message when opening VI "LABVIEW: VI not loadable

Similar Messages

Maybe you are looking for