Message while creating a class method

Hi all,
I have created a class as local object. When i try to modify that class the following message is displayed.
"You are not authorized to make changes (authorization object S_DEVELOP)"

Click [here|http://help.sap.com/saphelp_40b/helpdata/EN/27/174b6e5733d1118b3f0060b03ca329/content.htm] to know about s_develop authorization object.
and Please ask your BASIS Team or Security Admin to get the Change Authorization to your User
ID/Profile.

Similar Messages

Error While Creating Asset Class

Hi Friends,
I am getting the following error in development client while creating the asset class AB2200.
"Screen Layout 200 was not created" but the same was created.
Please guide me how to handle this error and the reason for me getting this error message while creating asset class.
Your quick response would be highly solicited.
Thanks and Regards,
C.R.Srinath

Hi Srinath
There are 2 things.. Create the screen layout and Define the screen layout... (IMG> AA > Master Data> Screen Layout for asset classes)
Complete both the steps here and specify the same sccreen layout in your asset class
Regards
Ajay M

View not copied or enhanced with wizard Error while creating Event Handler method in Z Component

Hello Friends,
In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.

Hi,
Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters. I dont have have the system right now. Please check any existing event import export parameters.
Check out do handle event method in the same class.
Redefine that method. Call that event method in this handle method. See existing code for reference.
Attach that event to the button on click event in .htm page.
Regards,
Bhushan

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Pop up warning message while creating PO

Hi,
How to give a Genral or a POP up Warning Message while creating and checking a PO in ME21n and ME22n.
Even i tried in changing the local setting in the menu bar, but it doesnt work.
Help and suggestions will be much appreciated.
Thanks & Regards.
Kumar.

Hi Jay,
I tired with the BADI ME_PROCESS_PO_CUST in the method IF_EX_ME_PROCESS_PO_CUST~CHECK, but still i am able to display only error message not Warning message.
Any suggestion regarding this.....
Thanks & Regards.
Kumar.

Suppress an error message while creating a return PO ( ZRO type) (ME21n)

Hello All,
I have to write a code in order to suppress the below message while creating a return purchase order (of type ZRO) , transaction ME21n after entering the purchase organization, purchase group, the vendor & the material no :-
"You have no authorization to create without reference to another document".
For users with the below values of parameter ID & parameter value :-
parameter ID = EFB & parameter value = 02 in transaction 'SU3' , under "parameters" tab, this message is getting triggered.
My requirement is to suppress this message.
Please suggest an exit name or a BADI name wherein I can implement the code for this requirement.
Regards,
Rachana.

You can remove parameter ID EFB
and for Order type other then ZRO you can put check of doc. reference.

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Error while creating model classes, operation aborted in NWDS

Hi All,
When i select Adaptive rfc 2 model and then search for the RFC, when i select RFC and click on next i get an error while importing :
Error while creating model classes, operation aborted.
It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
Can any one help me out??
Regards,
Pradeep kumar
Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

Hai guys thanks for reply
Tushar,
I am using NWDS 7.2, ce7.2 server, ECC 6.0.
Amit,
I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
Deepak,
I am unable to create model in other projects also.
I have sufficient amount of memory in my drive.
I have imported the DC to other NWDS but it gives same error.
Thanks for all,
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

Warning to error message while creating a SC

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Use the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin

Error message while creating Appropriation Request

Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors         RAISE_EXCEPTION
Date and Time          18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
     condition "ERROR_IN_STATUS".
     Since the exception was not intercepted by a superior program
     in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLAIA_TOOL
     Include                                 LAIA_TOOLU11
     Row                                     119
     Module type                             (FUNCTION)
     Module Name                             AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 *                TYPE       = SY-MSGTY
    90 *                CL         = SY-MSGID
    91 *                NUMBER     = SY-MSGNO
    92 *                PAR1       = SY-MSGV1
    93 *                PAR2       = SY-MSGV2
    94 *                PAR3       = SY-MSGV3
    95 *                PAR4       = SY-MSGV4
    96 *           IMPORTING
    97 *                RETURN     = ls_return.
    98 *   endif.
    99 *   if not ls_return is initial.
   100 *      append ls_return to return.
   101 *      raise error_in_status.
   102 *   endif.
   103 *
   104 * Füllen der Ausgabetabellen
   105    perform fill_output_tables tables lt_status
   106                                      lt_jsto
   107                                      et_appreq_status
   108                                      et_appreqvarnt_status
   109                                      et_appreq_user_status
   110                                      et_appreqvarnt_user_status
   111                                      lt_objnr
   112                                      lt_objnr_varnt
   113                                      lt_return
   114                               using i_language
   115                                      i_with_text.
   116
   117    if not lt_return[] is initial.
   118       append lines of lt_return to return.
>>>>>       raise error_in_status.
   120    endif.
   121
   122
   123 ENDFUNCTION.

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Error message while creating or editing a report

Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.

Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

General Warning Message while creating po

Hi Gurus,
Good Morning.
I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
This message should be applicable to all PO .
How to create a message and assign in PO ?
Thanks & Regards,
Vikas

Hi Archit,
Thanks for your reply.
How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
Thanks & Regards,
Vikas

Error Message while creating connection pool

Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

ERROR Message while creating Rebate condition record T code VBO1

Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
siva

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Message while creating a class method

Similar Messages

Maybe you are looking for