Message window in projector

I have messageWindow = 1 in the .ini file and I designate the
rect as well.
My ini file is named the same as the projector but I'm not
getting a message
window. Isn't there a line of lingo I need in my movie? Or is
there
something else I'm doing wrong?
I'm using MX on a PC with XP
Craig

the debugPlaybackEnabled = TRUE
"womp" <[email protected]> wrote in message
news:fljtd3$icf$[email protected]..
>I have messageWindow = 1 in the .ini file and I designate
the rect as well.
>My ini file is named the same as the projector but I'm
not getting a
>message window. Isn't there a line of lingo I need in my
movie? Or is there
>something else I'm doing wrong?
>
> I'm using MX on a PC with XP
>
>
> Craig
>

Similar Messages

Mail wont let me open new message window

Hello,
So lately I have noticed a bug, I believe, in mail. At random times when I click on the new message icon nothing happens. However, if I close mail completely and reopen it, the new message window shows up. Any idea why this is happening? Thanks for the help
Derek Osterloh

SUSSED THE NEW MAIL MESSAGE PROBLEM!!!
I am delighted to say that I resolved this one myself... Its on an IMAC 20", which I had also hooked up to a second display (although not switched on). What happened is that I turned to system Preferences, went to Displays, and changed the settings in the arrangement tab. This I thought would help, as perhaps the New Message window had been created, but was displayed somewhere else I could not see, and Guess what, there they all were! They had been elongated after the update to Leopard, and subsequently, were all sat there on the 'other' display.
I hope his helps with others with the same problem. (thats also why I did not have the problem on the laptop)
Good luck to all.

Cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

How to change font size and window size for a pop-up Message Window?

Hello,
I am trying to display a very important message to alert our tester or any user when there is an emergency and they have to stop the test they are doing. I really desire to use larger message window/fonts to do this.
I have tried Display Message To User and converted it to SubVI, but no luck yet. I thought SubVI might work. But when it's displayed, the original Pop-up Message Window sat right on the SubVI panel. When I then clicked OK to close the Message Window, it closed the SubVI panel as well.
Are Text Indicator and its Visible Node the only way to make this happen? If yes, could someone teach me how to pause the program execution like Display Message To User when the program is waiting for user to click OK to continue?
Thanks So Much!
Shun

Hello,
Why don't you create your own vi and customize it.
See the attached example made for you
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
Main4.vi ‏7 KB
messagebox.vi ‏15 KB

Mail regularly open the new blank message window

After Mail initial start the programm opens a new blank message window. When I try to close it I receive the message "Do you want to save it as a draft and work on it later?"
The new blank message window appears regularly every 4-5 minutes. How can I fix it? And thanks in advance for response and help.

Do you see the Outbox in Mail? Does it contain any messages?

New message window keeps popping up

The new message window keeps popping up without prompting, usually twice in a row. I notice
this particularly when I first open the Mail program. The funny thing is that you can't actually type in any text in the new message window. Any ideas???

It seemed to work itself out after several days.

Mail "New Message" window retreats to background after drag and drop attachment from Finder to Mail "New Message", click, and Finder window stays in foreground even when not in focus

Hi, I'm surprised I can't quickly find if anyone else is having this issue. For me it has been going on since Lion on my 13" MacBook Pro 2011 and it's still persisting in Mavericks, and even still now that I've "downgraded" to a 15" MacBook Pro 2010 with Mavericks. The behavior is odd and difficult to explain concisely. Basically, when I want to add an attachment to Mail, I'll Cmd+Tab over to Finder click and drag and Cmd+Tab back to Mail, and drop the attachment. At first it looks fine, but when I click in the New Message window where I just dropped the attachment, to move the cursor, it retreats to the background and the Mail Main Window comes to the foreground. Then, if I click on that, the Finder window that I just used comes to the foreground. Sometimes if I switched to another app before going to Finder to select the drag and drop, that other app window will appear in the foreground instead. If I click on the other app window that is now in the foreground, then the Finder window that was last used will come to the foreground. The only thing that seems to fix this switch-a-roo effect is Cmd+Tab-ing back and forth a few times, or click on the window "frame" at the top to move the window around.
The way to prevent this is to have my Mail Message window visible in the foreground side by side with the Finder window when the drag and drop occurs (this is a tedious extra step if mulitple windows are open, or to use the add attachment command in the menu within Mail. But it sure is annoying buggy behavior.
Thanks
Daniel

Yep, I get exactly the same thing when using Thunderbird mail client on my 2011 iMac running Lion. I've been putting up with it for at least a year, maybe longer.
For me it appeared to start after a Thunderbird update, so I figured that was the cause and couldn't find a solution at the time. However I've now noticed it starting to happen in Apple Motion 4 when dragging files from Finder into a DropZone in my animations. Motion remains the active program but the Finder window sits on top until I Cmd-tab out to a third open program (ie not Finder) and back to Motion again.
This is the first indicator I've had that it's an OS X issue.
Be great to find a solution as D&D is by far my preferred way of adding attachments to emails and similar tasks.

Clicking email-links doesn't open "new message" window

Hi,
When I click email links, safari doesn't take me to the "new message" window. It activates safari: the program comes on in the dock and the text next to the apple logo changes to "mail", but I don't get the "new message" window

You're welcome. Glad to have helped.
Mahalo (thanks) for the and Aloha from Big Island.

Can't open new message window or reply window in mail

I just started having issues where I cannot open a new message window or a reply window. I also cannot open a new Note or To Do. I restarted, zapped the pram (8 times), and was going to trash the plist but couldn't find it. Does anyone know if there is a plist for mail. Any other suggestions would be welcome.

Hi ulua & welcome to discussions...
Try this - find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - doing this may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc.

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

My laptop beeps every time I open it, then when the Windows is already open a message window asking

My HP Compaq Presario Q40 CQ40 beeps everytime I open it, the when the windows are already open and i click an icon a message window appear asking me if I want to delete the said icon even if I dont want to delete it, when i click the no id does not disappear, itjust come keep on coming out as if it want to send the contents all to recycle bin..pls help I really dont know what to do, and by the way my battery needs replacement too and i haven't bought a new one yet.

I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

Send message windows doesn't close after sending attached PDF from Acrobat

I have several forms that I have created in Acrobat 9 Pro. These forms have a button set to submit to an email address. After filling out the form, and clicking on the submit button some, but not all, of users with Outlook 2007 are having a problem with the send message window not closing after sending the email.
When they click the button the email is created with the form as an attachment. When they click the send button in the send message window the message goes into the outbox, and then gets sent no problems. But the send message window never closes after sending the message. So my users think the message never got sent.
The computers that I am seeing this on all run XP, have Outlook 2007, and use Acrobat Standard 8. On some computers it works just fine, and on others it has the problem. It must be a setting somewhere but I can not figure it out.
Closing the window by clicking on the "X" is no problem, but many of my users are pretty new to computers know very little about them. So something like this causes them a lot of problems.
Any suggestions?
Trudy

My apologies, when I said "instance" I meant window.
I also just realized the new window and then closing behavior only happens when the iTunes link clicked is in an email in Mail (presumably, this would also happen in other desktop email clients). When an iTunes link in Safari is clicked, the "iTunes loading" white page appears for a moment and then Safari navigates back to the page with the link. However, that isn't working properly, either. The white page continues to "load" indefinitely and never returns to the previous page.
Here is a link:
http://www.imogenheap.com/buy/

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

How to delete account from list of senders in new message window

Hello. I would like to know how to remove a particular email account from the list that is available in a new message window in the "Account" field (right below subject field) which lists email addresses of the sender. I deleted one of my email accounts from Mail but the email address for it still shows up there as an option and is in fact the default option each time because it was my main choice before I deleted the account from Mail. Now I have to change this each time I send a message and it is getting annoying, but I don't know how to get rid of the old address from the list. Anyone?

mikate,
Open Mail>Preferences...>Composing>Addressing: Send new mail from: (Choose the correct address).
If that is unsuccessful, also open Address Book and then check the card with your name in the "Name" column. If the old address is listed in that "Me" card, click the edit button and remove it.
In order to improve your chances of getting a solution to your problem it would be helpful if you supplied additional details about your operating system, and hardware configuration in "My Settings."
;~)

Message window in projector

Similar Messages

Maybe you are looking for