Message with error in SMQ2

Hi,
Does anyone know why some messages with message mapping failures shows up in SMQ2 and some messages with message mapping failures won't show up in SMQ2?
Thanks,
Jay

Hi Jung,
If there is a mapping problem then you should be able to see the error messages in SXMB_MONI.
SMQ2 will show errors in case there are problems with inbound queue.
The various problems can be queue getting stuck, queues not registered, etc.. incase of mapping error you cannot see error in inbound queue (SMQ2).
Regards,
Gautam Purohit

Similar Messages

Monitoring SAPconnect message with error into RZ20

Hello,
I would like to send an alert by e-mail every time a message aimed at being sent outside SAP (through SAPconnect layer) fails.
I have customized using standard help and OSS notes 546493 and 683974.
Into RZ20, I have customized the INT node with the following data:
maximum of alerts kept = 1
the newest alerts are kept
set "value obsolete" after 0 seconds
Performance attributes
last reported value
threshold values : 0 for the 4 fields
alert is triggered if the comparative value exceeds the treshold value
Methods attributes
start the data collection every 300 seconds
data collection method = SAPconnect
auto-reaction method = ZCCMS_Send_Alert_to_ALM_V2 (duplicated from CCMS_Send_Alert_to_ALM_V2)
With this customizing, I expected to trigger an alert at every message with error.
Unfortunately, it triggers the alerts only at the first message in error.
I have to complete the alert manually to expect an alert trigged for the following message with error.
Is there a way to complete the alert automatically (as soon as it is triggered) ?
Or how can I do to achieve what I would like to do ?
Thank you very much for your help.
Regards,
Fabrice

Hello Alexander,
yes, I have tried to set the "value obsolete" to 1 seconde.
Indeed, the value becomes obsolete but the alert is not completed.
Then, for the following error, I get a new value but no new alert is triggered.
Thank you.
Regards,
Fabrice

Messages with errors canceled

What is the meaning of this below message status in SXMB_MONI ?? What is the cause of this status ?? What is the meaning of message can be deleted with the next delete job ??
Messages with errors canceled
Processing of a message with errors was canceled. The message can therefore be deleted with the next delete job.
Thanks
Kumar

This status signifies the following:
1. The message has errors and was canceled manually.
2. The status is final, i.e., it cannot be restarted now.
3. The message can be deleted.
Regards,
Prateek

Cancel message with errors - How to automate this?

XI / PI SDN Community
I think that because of basis team settings every time a message fails to pass through the pipeline (for example a mapping error) XI tries to process this message over and over again for days!
Assuming that basis is not going to change any configuration on their end: Is therer a way to create a job (TCODE sm36) to do this cancel for me? - I mean I have access to go and manually cancel the message with errors tru the moni.
Regards,
José Francisco

Dear Jose,
Hi this is Tarang ...
For cancelling messages on Java engine ( ones that you see on RWB )
1. There is no standard program which would allow you to cancel the messages here
2. you can only set a maxim retry interval...i.e how many times a meesage in error should be retried foe sending...this setting can be done in transaction sxmb_adm....there is a parameter called IS_RETRY for this..
For cancelling the messages on ABAP engine ( ones that you see in MONI)
1. You can cancel them using the report rsxmb_cancel_messages ...but dont use this report independently...
coz there are some chances ..due to which you are getting a message in error in moni ..but the message is restartable......then if you directly cancel it , it is not correct
2. you cna club the above report with rsxmb_restart_messages...i.e you can create a job sequence where 1 step would be scheduling thee program rsxmb_restart_messages and then the ones that are not restarted properly ...yu can cancle using the second step in the sequence ....i.e rsxmb_cancel_messages
But be it ABAP / JAVA engine every XI landscape has many of the EOIO interfaces where in the concept is that if the first message in the queue gets stuck ...the message behind that should also get stuck....if you cancel message automatically (say using the above report), there are chances that particular message was configured for EOIO and the message behind that is actuaaly not meant to move ahead..but once you cancel the first message3 the other will go.....which is wrong and against the laws of EOIO...
hence SAP suggests " no automatic cancellation of message neither at ABAP nor at JAVA level should be done"
SAP says that manual cancellation of messages is included in the daily maintenance task of XI
you can obviously play with the number of retries using entry IS_retry
Hope this helps
Edited by: Tarang Shah on Mar 6, 2009 11:07 AM

HT6114 computer gives restart message with error report, follows update 10.9.2

following update to 10.9.2 get restart message with error report

Hi g4towerman,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful with diagnosing and resolving the error you are seeing:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
Best Regards,
Jeremy

Resend cancelled messages with errors

Hi! I cancelled some messages then i need to resend them. however it show an error: "Unable to schedule n of n messages for processing; update the status". what are the steps to resend them back?
Thanks!

Hi Ronald - If the messages are cancelled, you should get them republished from source..
have a look at the below thread -
How to resend Message from RWB With status "Canceled with Errors"
If you can download the payload, may be you send it from RWB..
modified...

After installing the last version of iTunes, it failed to lunch and gave me 2 Error messages with Error 7 title , rebeat installation several times with the same Error message, what shall I do?

Once I finish upgrading iTunes on my Windows PC, I had an Error as t shown on the image below which doesn't allow the iTunes App to lunch.
Please advise what shall I do ?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

** Is it possible to skip messages with error in BPM and continue next msg

Hi Friends,
I am doing File to File BPM scenario. My Source XML is like as below.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://www.test.com/XITEST/FileToFile/BPM">
   <Details>
      <EmpCode>10010</EmpCode>
      <EmpName>Jeg</EmpName>
      <***>M</***>
      <BasicPay>5000</BasicPay>
   </Details>
   <Details>
      <EmpCode>10011</EmpCode>
      <EmpName>Praksh</EmpName>
      <***>M</***>
      <BasicPay>4500</BasicPay>
   </Details>
   <Details>
      <EmpCode>10012</EmpCode>
      <EmpName>Nithya</EmpName>
      <***>F</***>
      <BasicPay>4300</BasicPay>
   </Details>
   <Details>
      <EmpCode>10013</EmpCode>
      <EmpName>Sunil</EmpName>
      <***>F</***>
      <BasicPay>4800</BasicPay>
   </Details>
   <Details>
      <EmpCode>10014</EmpCode>
      <EmpName>Abdul</EmpName>
      <***>M</***>
      <BasicPay>4750</BasicPay>
   </Details>
   <Details>
      <EmpCode>10015</EmpCode>
      <EmpName>Sathya</EmpName>
      <***>F</***>
      <BasicPay>4250</BasicPay>
   </Details>
   <Details>
      <EmpCode>10016</EmpCode>
      <EmpName>Rams</EmpName>
      <***>M</***>
      <BasicPay>8000</BasicPay>
   </Details>
</ns0:Employee>
If you look at the above message, the 3rd & 6th employee are female. In the BPM design, we use
a) 'Transformation' step, to split the messages (1:n).
b) Block Step (Mode : For Each) to process one by one message
c) in the Container Step, thru XPath expression we created one variable and assign '***' to that variable
d) In the Switch step we check whether variable is 'F' (Female). If it is there we insert control step to throw exception. (But, exception Branch is not added to catch the exception. The reason is that to restart the BPM)
e) If the *** is 'M' we insert Send Step to send the employee to the output file.
Note that if we insert exception handler branch, the BPM will tell this is completed. So, we are not able to restart those records (*** = 'F') after correct ***. Once the BPM is completed, that work item will not come in tcode 'Continue Process Following Error' option in tcode SXMB_MONI_BPE
Requirement is whenever the BPM encounters *** = 'F', it should throw an error and the same time BPM should not stop and continue with the next records.
Friends, we tried all the ways thru 'Queue Assignment' property of the BPM and made settings thru tcode SWF_INB_CONF. But, we are not able to achive this requirmenent.
'Restart possibilitye of the BPM for the error record and the same time should process the remaining correct records'.
Any idea friends, to solve this issue.
Kindly Reply,
Jeg P.

Use one more Receiver Abstract interface for this and do the message and interface mapping .
Collecting :
If ur record is female (u r checking this in swich step) , pass tht record to intreface mapping (use one branch here to collect the message).
Else you send that message to the target(else branch)
After that use one block for collecting messages and throw the exception for each record......

I cannot enter my time machine. I have a message with "error code −6584"

I am trying to access my time machine. I have an error message saying that an unexpected error occurred (error code -6584)

Reboot the whole network first and then retry TM.
If that doesn't work then do a verfiy of the backup.
hold the option key and click the TM icon in the top right area.. a menu with verify appears run that..
If still no good there is a long post with more info.. just follow the More Like This on the right to see if other solutions work.

Cancel or Reprocess BPM message with error on outbound state

I have a BPM scenario, IDOC comes from R3 and triggers a BPM. The BPM has a fork step which sends the message across 4 branches. Each branch has its own steps. Now, the problem is the IDOC has come and has trigerred the BPM but has errored on outbound side. The first step in each branch is a mapping step and the BPM has failed at this due to Jco communication failure. This has been fixed now. Now I need to reprocess this message, but can not restart as it shows succes message in inbound side.
I have to re process this message, but how?
Regards,
Jaishankar

Jai,
I dont know whether it is the correct appraoch.
Have a look at the transaction SWWERRE_DEBUG
Regards,
Sudharshan N A

I was referred to this site when I looked for answers to why I got Fatal Error message with error code c0000005 when trying to upload photos to my computer. I see that someone else asked the same question, 90 people viewed but no answer given?

I was referred to this site when I got Fatal Error message Error code c0000005 while trying to upload photos to computer. Someone else asked the same question in this forum, 90 people viewed the question but it was never answered?

It looks to me like it is a problem on your Windows computer not being able to start an application. See the following link to Microsoft Community support (although the specifics of the problem in that case may not be applicable) and also note all of the "Related Content" at the upper right side of that link (and there may be others if you search that forum). http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-applicatio n-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17
It may help if you know or can determine which program Windows is trying to open when you upload photos -- there can be many different ones and it can be set by the user. If you are using Windows 7, you may need to check your Autoplay settings. There are some instructions in the following link that may help and that discuss how you can use Windows Explorer to manually transfer the photos: http://support.apple.com/kb/HT4083

Laptop won't boot up past the Toshiba start up message with error 0x0000007B

Hello,
I have a Toshiba Satellite, installed win 7.
Today, I powered on my PC, it starts and then flashes on the "Toshiba Leading Innovation" screen and repeats in a continuous loop but never goes any further.
I tried the basic system reset. Nothing happened.
I insrted a bootable Windows CD and I booted from it, a blue problem scrren was shown with the following details
A problem has been detected.....
check for virusu on your computer. Remove any ....
Technical information
*** STOP: 0x0000007B (0xF78D663C,0xC0000034,0x00000000,0x00000000)
Any help?

please provide your full model number. it is printed on the bottom of the computer
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Program to cancel xml message with status error or schedule ?

Hi,
Any program that can cancel xml message base on period. because i have about 100 thousand unuse xml message that accidentaly generated. because it is too long if i need to cancel 1 by one.
Regards
Fernand

Hi All,
I already try this program below :
RSXMB_CANCEL_Message - cancel the meesage with errors.
RSXMB_CANCEL_NO_COMMIT_MSG -cancel the message processing for messages without commit.
RSXMB_CANCEL_NOT_REST_MESSAGES - Cancel Xi messages with errors that cannot be restarted
but then no result selected. i need to select manual those message and cancel using cancel button.
please advise.
Thank you and best regards
Fernand

Proxy messages are stucked in SMQ2 as scheduled status

Hi,
I am doing File(FCC) >PI 7.0>ABAP proxy. (ECC) Scenario.
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are getting stucked in queues (SMQ2) in ECC. My message is not having much data , it is very less in size.
And there is no messages in Queue.
I register all queues in SMQR in PI and ECC.
Does I need to do any activity in ECC or PI? What could be a problem. Please suggest .
Thanks
Ayub

Hi Venkata,
Thanks for very quick replay.
Are the messages stuck with any error?--> First I can see the Green Color Flag as scheduled status, I open the message I can see there is no error message.Bt when I have look at end of the message in SXMB_MONI at Q.Status , I can see Message Has error
In SMQ2 -->
Cl. Queue Name               Entries    Status   Date 1     Time 1   NxtDate           NxtTim                  Sender ID                        Wait for queue
200 XBTR0009                         1 SYSFAIL 24.02.2012 10:53:34 24.02.2012 10:53:34      R3DEVQA_RDV_01
And when I double click the XBTR009 I can see the below message :
Cl.       User                  Function Module                 Queue Name                Date        Time                       StatusText
200 ALEREMOTE    SXMS_ASYNC_EXEC                 XBTR0009                  24.02.2012 10:53:34 Screen output without connection to user.
This are status of the messages. Please help me.
Regards,
Ahmed

When I start iTunes a message whith error (-42032). How do I solve this error?

When starting iTunes a it appears a messages with error (-42032). How do I solve this error?

1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

Message with error in SMQ2

Similar Messages

Maybe you are looking for