Message without message class

Hi All
Is it possible to post a message in ABAP program without a message class (MESSAGE).
Amol

Hi amol,
1. simple
2. MESSAGE 'this is message' type 'I'.
where I can be E,W,S etc.
(It should be in Quotes)
(or can be a variable also)
regards,
amit m.

Similar Messages

Create a message without the message class

Hi,
How would I display an error message with the MESSAGE statement without using the MESSAGE CLASS.
Please let me know the code for it.
Thanks and regards,
Anishur

Hi Priyank,
I was missing the quotes in E.
Thanks a lot!!!!!!
Regards,
Anishur

Message Classes for Leave Request

Hi,
I've checked every message class I can think of but can't find the warning message:
"Absence cannot be partial-day, so clock times have been removed."
which is displayed in Leave Request.
Does anyone know which class it is in so I can stop it being displayed?
Is it within the WebDynpro?
Rob

You mentioned about configuring messages in Leave Request. How do you change the text of a standard SAP message? I would like to change the text of the message 015 Payroll Area &1 locked that is displayed in the portal, without using BADI.
As I read through the blogs this seemed to be the closest message to my particular question.
Thanks.

Error Message Classes for Leave Request

Hi,
I've checked every error message class I can think of but can't find the warning message:
"Absence cannot be partial-day, so clock times have been removed."
which is displayed in Leave Request.
Does anyone know which class it is in so I can stop it being displayed?
Rob
Edited by: Rob Adams on Dec 18, 2008 12:18 PM

You mentioned about configuring messages in Leave Request. How do you change the text of a standard SAP message? I would like to change the text of the message 015 Payroll Area &1 locked that is displayed in the portal, without using BADI.
As I read through the blogs this seemed to be the closest message to my particular question.
Thanks.

MESSAGE class problem.

Hi ,
I have coded an error message for my form by using below syntax.
MESSAGE ID 'Z0' TYPE 'E' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for' wa_zmas-matnr .
It worked fine when i try to display the form with an error message in tcod : vf03
Then i try to cancel this billing document in tcode : vf11 and able to save without a problem.
Now my problem is, when i try to view this billing document again via tcode : vf03 again, there's is an error message shown by the system :
Express document "Update was terminated" received from author "ABCDE".
This indicates that my cancellation/reverse of this billing doc no its not successful.
I was wondering is it cause by my above code but when i try to do the cancelation, it did not went through my coding? Please help.
Thank you.

Hi, below its my coding (bold).
-i suspected its the error message. This is because once i uncomment the message class, the error will not appear.
-i have problem in create billing too.
-my process was, i create a new billing --> click on save button --> view my new billing via vf03 --> pop up error msg.
-pop up error message : Express document "Update was terminated" received from author "USER01".
-when i check my inbox msg, it shown below.
Update was terminated
System ID....   DEV
Client.......   300
User.....   DCABAP03
Transaction..   VF01
Update key...   16AE88DE0111F11EA300001A64635E5E
Generated....   14.08.2009, 16:40:21
Completed....   14.08.2009, 16:40:22
Error Info...   Z0 999: Please maintain cust pricing grp 34
- i realised that the error info it's the same with my coding.
- my main purpose its to display this error message once i print preview the form via vf03 output type only.
LOOP AT it_zmas INTO wa_zmas.
      IF wa_zmas-mtart = 'FIN' AND wa_zmas-fkimg NE '0'.
        LOOP AT tvbdpr WHERE posnr = wa_zmas-posnr AND matnr = wa_zmas-matnr.
*read internal table it_zmas to save uecha, gross value and discount.
          READ TABLE it_zmas WITH KEY posnr = wa_zmas-posnr matnr = wa_zmas-matnr.
          IF sy-subrc = 0.
*to retrieve uecha from tvbdpr and to compared with intab-posnr. intab posnr its taken from tvbdpr-uecha and tvbdpr-posnr.
            IF tvbdpr-uecha <> 0.
              it_zmas-uecha = tvbdpr-uecha.
            ELSE.
              it_zmas-uecha = tvbdpr-posnr.
            ENDIF.
*to retieve cust pricing group and material table.
            SELECT SINGLE knumh INTO zknumh FROM a960
              WHERE kschl = 'Z001'
              AND zzkonda = '34'
              AND matnr = wa_zmas-matnr
              AND datab LE tvbdpr-prsdt
              AND datbi GE tvbdpr-prsdt.
*if there is cust pricing grp available continue else display error message.
            IF zknumh IS NOT INITIAL.
              SELECT SINGLE kbetr INTO (zkbetr) FROM konp
                WHERE knumh = zknumh.
*determine gross value
              it_zmas-gross_value = zkbetr * wa_zmas-fklmg.
              LOOP AT intab WHERE matnr = wa_zmas-matnr AND posnr = it_zmas-uecha.
                AT NEW posnr.
                  SUM.
                  zkwert = intab-kwert.
                ENDAT.
              ENDLOOP.
*determine discount
              it_zmas-discount = it_zmas-gross_value - zkwert.
              MODIFY it_zmas.
            ELSE.
         *MESSAGE ID 'Z0' TYPE 'I' NUMBER '999' WITH 'Please maintain cust pricing grp 34'.*
            ENDIF.
            CLEAR zknumh.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDLOOP.
could anyone guide me or let me know what did i do wrongly? really appreciate your help.
thank you.
regards,
sw
Edited by: SW on Aug 14, 2009 10:48 AM

Message Class - Validation

Hi
Message class can it be transpoted without release(Transport request) to other clients. ????
The problem is ,once the message class is created & released, not in a postion to add any new messages .
For any new requirement ,new message class is been created and transported to other clients .
Any solution avvailable to maintain only one message class through out implementation with different clients .
Regards
Rao

hi
you can create new messages in the same message class and save it.
this will generate another request which can be transportable to other clients.

How to change message class selected for validation ?

Dear all,
For testing, I have created a new validation (applic. area : FI, Callup point:2) with a existing message class (/EACA/BTA_GL).
But now, I would like to create a new validation for the same application area and callup point, but with another message class (that I have created with Z_...).
But unfortunately, I cannot choose another message class when I create a new validation.
Could you help me ?
Thank you and best regards

To change the message class of a callup point please use program
RGUGBR28 (description in SAP note 6975). After making the change,
generate the coding with program RGUGBR00 for the application (without
marking the last two checkboxes).
kind regards,
Diogo Peretti.

Read message form message class

HI All
i want to read message from message class (SE91) into my variable
there is a way to get it without raise a message?
just to read it to some variable and proceed with the program flow .
Regards
James

Hi James,
You can capture the message of SE91 with function module 'FORMAT_MESSAGE' .
Example:
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id     = i_message-msgid
lang = i_message-msgspra
no   = i_message-msgnr
v1   = i_message-msgv1
v2   = i_message-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
Regards,
Moqeeth.

Message class - SE91

Good afternoon,
How can I view a message via transaction SE91 without knowing the message class?
Thank you.
Kind regards,
Linda

hi
while u enetering in to message class it ask for message class name. u can search using the F4 help present.
r u can refer to the table T100, T100T for it.

Message class as result data object

hello brf+ users,
is it possible to use as Result data object in a Case expression a message from a custom message class?
thanks
danilo

thanks Carsten,
my requirement can be simplified in
IF FISCAL CODE
equals to " " then "001" ENTRY MISSING is returned
otherwise "000" check ok is returned.
where 000,001 are domain values of an element (MESSAGE RESULT).
can i use the message class as result? is there a way to anchor the result to the message class?
thanks
danilo

Write message to Job log with message class and message number

hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNg

Hi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel.

How to import a message class in a fm

Hello!
I' m programminn a FM.
I need to use a message class that i have created. How i can import it?
I have to return a strcuct which i have to copy my message class.
My code:
          DETAIL_RETURN-ID =
          DETAIL_RETURN-NUMBER =
          DETAIL_RETURN-MESSAGE =
          DETAIL_RETURN-MESSAGE_V1 =
          APPEND DETAIL_RETURN.
I know in a report is:
REPORT report_name MESSAGE-ID my_message_class_name.
In a FM?
regards

1.Add in the Top include or
2.
message id is nothing but Message class .
here u have to populate the Return table itself.
like this
DETAIL_RETURN-ID = 'V1'.
DETAIL_RETURN-NUMBER ='100'.
DETAIL_RETURN-MESSAGE = 'Njoy SAP'.
DETAIL_RETURN-MESSAGE_V1 = 'U'.
APPEND DETAIL_RETURN.
Regards
Peram

Error Occured While Creating message class 8II In SapNote 1486147

Dear All
I applied SapNote 1486147 but at the time of creating message class 8II
It shows error like this
Object MSAG 8II is in reserved name range for sap partner
Any body help on this.
Edited by: chandrap on Feb 24, 2011 2:08 PM

Hi Yasir,
remove the jaxb.jar from the WEB_INF/lib and move
them to your SUNWappserv/lib/endorsed - dir, together
with the following jars:
dom.jar jaxb-api.jar jaxb-impl.jar jaxb-libs.jar
jaxb-xjc.jar namespace.jar relaxngDatatype.jar
r xalan.jar
xercesImpl.jar xsdlib.jar
(restart the deploytool if used)
This should work,
Bas van OudenaardeHi Bas
Thank you for the very useful tip but I don't seem to have a SUNWappserv/lib/endorsed - directory inside my .war archive , could you please advise on this issue

Issue in maintaining Long Text in Message Class

Hi
For Note implementation 1413492, I have to maintain long text, when I click on Long Text , I get a pop-up Create Modification , with 2 options for Template Type (1) Original Text (2) Template (With Headers)
Can anyone let me know how to proceed further, whatever name I give for the Modification, I am getting Error Message saying 'Enhancement Name violates the namespace convention (Note 989653)', I have tried unchecking the Self Explanatory check box as well, but still I get the same error message.
Below is the Long text I have to maintain class FR, message number 533
7. Create new error messages in the message class FR:
Call transaction SE91, enter the message class FR, and choose "Display" and
then "Change". Enter the following new messages:
Message Message short text:
533 Error while calling RFC destination
534 Contract Accounts Receivable and Payable is not installed in the
system
535 For company code & there were & data records transferred from
FI-CA
536 Error during data transfer from FI-CA for company code &; error
text:
Set the "Self-explanat'y" indicator for messages 535 and 536.
Enter a long text for messages 533 and 534:
Long text FR 533:
CAUSE
An error occurred when testing the RFC connection to Contract Accounts
Receivable and Payable. The message text is:
&V1&&V2&&V3&
SYS_ADMIN
Check the settings of the RFC destination &V4&.

Hi Ryan,
Extract from note 989653;
Note:
The name of the modification object must start with:
o 'Z'/'Y', or
o the customer namespace available in the system (TRNSPACE table).
Otherwise, message 645 will appear because the SAP namespace is not
permitted.
My suggestion would be to start the name with a Z.
Regards,
Nick

How to maintain long texts in different languages in a message class

Hi All,
I have maintained a message and its transaltions in some other languages in a custom message class. I have maintined the long text in English language. But I am not getting how to maintain the long text in other languages.
Please help.
Regards
Kiran

Hi Kiran,
Good!
In the message class corresponding to that message give the place holders &&&&.
Like 001 &&&&
in the program.
Message <class>001 with text-001 text-002 text-003 text-004.
then you could disply long text.translation takes place if u enter in different language automatically.
thanks,
Sunil.

Message without message class

Similar Messages

Maybe you are looking for