Message "WLAN: Unable to connect. Wlan Network not...
Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
Thanks
Message Edited by darkcraft on 13-Jul-2009 09:47 PM
tomasvaril wrote:
Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
Have you tried swithing a WLAN channel that your router uses?
Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.
Similar Messages
-
I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?Could be that the servers are overloaded today.
-
iphone recognizes home network but cannot connect. Message states " unable to join network". Any suggestions?
IOS troubleshooting wif - networks and connections http://support.apple.com/kb/TS1398
try - settings - general - reset - reset network settings. -
Imac FaceTime unable to connect to network (safari connected and loading pages).
I have a brand new Imac, I have never been able to get facetime to work. It keeps getting hung up on the log in page, and eventually gives me an error message of unable to connect to network. Safari and other web based programs are working perfectly.
Any Ideas?How can I get my Mac to join an open 3Com wireless
network? The network is recognised but Mac is unable
to connect...
The 3Com wireless router is connected to a broadband
router through a PC running XP.
Do you have two routers? That may be your issue. You should only be using one router, or configure one of the routers and turn of DHCP. -
NOKIA N8 - Unable to connect - WLAN Network not fo...
also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!
Well, I seem to have issues with WLAN as well.
When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
P.S.: Tthere is another thread reporting similar problems. Here is the link. -
am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop
Hi K8tym,
Please refer to below article.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks -
when i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/ -
I am trying to connect to a network on my ipad but keep getting a message saying " Unable to join the network" and the omly opion is dismiss.....Can anyone help me find out what is wrong please?
Have a look at this may help
http://www.apple.com/uk/support/ipad/wifi/
Are you refering to a home network or some form of public
if home network ensure your router has latest firmware and try rebooting it -
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?
AmishCake wrote:
Have you tried restoring your softwareyes
yes I have -
I. Am unable to update Apps from iTunes via the apps button messages says unable to connect but can access iTunes directly via iTunes button on iPad
Cheers -
Ipod "unable to connect to network"
i have an ipod4, and i'm only unable to connect to my home router, my friend's ipod connects to it fine, but mine is having problems, i have reset network settings, turned off sercuity on router and was still unable to connect, i have gone into router and opened mac address too but still wont let me connect, any suggestions
I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.
-
Unable to Connect to Network error with right code
My Ipod Touch 4G just started having a problem a few days ago i left my house and reset my network settings because i wanted to see something not thinkign about when i got home and now any time i try to connect to it i ge the unable to connect to network error. My friends and family are all using there ipods on our network and they still work and ive tried everything ive updated reset network setting restored the ipod any suggestions on how to fix this?
- Did you power off and then back on the router?
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!
what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN -
I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?
Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.
Maybe you are looking for
-
IPhone 4S wifi goes on and off repeatedly on it's own/other apple products doing the same
Okay so I have WiFi problems and I can't seem to find anybody with the same problem as me. I've read many WiFi problems with iOS 6 on Apple Discussion Forums and also Googled it and none of the problems I've seen fit my category. Infact, my problem i
-
How do you get Airdrop to always work?
I have Airdrop on my two macbooks, both running Mavericks. Sometimes it works. Sometimes it doesn't. Today, I logged in and out of my Macbook Pro and it worked to connect to the Airdrop of my Macbook Air. When I tried it again, it did not work.
-
[JS, CS3] Texts of a xmlElement
I'm having a little thing here i dont understand. I found the below code on the forum, and have modyfied it very little. I use the script to find all xmlElements with a given name, and returning an array of the xmlElements.texts. Problem is, that for
-
How to create page reference to my item numbers?
Hello! I need help to mark all my item numbers and then create a page reference to them so I can create an Index page. Sample of my item numbers to find: #12345 #12345-5 #12345-20 #12345-ABC #12345/N Please help and thanks in advance!
-
Hi all, 11.2.0.1 Aix 6.1 I have issues with IMPDP & EXPDP when using non-dba users. These are the steps I followed: 1. I have created as root user, the directory /dpdump. 2. The chown 777 /dpdump. 3. As oracle user, I connect sqlplus / as sysdba , cr