Message "You may only enter amounts up to" creating document in FB60

Hi
We are facing this message "You may only enter amounts up to VEF 10.000.000,00" when user is creating document in FB60, where do we check in SPRO to change the amount.
Thanks in advance.

Hi,
That is probably the document tolerance for employees.
Check the tolerance groups are maintained per company code in tx OBA4. Tolerance group <blank>  is used if you have not assigned specific tolerance groups to users.
The 'Amount per document' is probably the issue here. System checks this againts total debits of the document.
You may have assigned users to specific tolerance groups. Check that with OB57.
You can find this in the IMG by searching for searching for  ''Define Tolerance Groups for Employees" and "Assign User/Tolerance Groups".
Regards,
Rob

Similar Messages

  • I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?

    I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?

    Hi
    One Must NEVER move or alter any folders named
    • iMovie Event's - or -
    • iMovie Projects - or - alike
    on DESKTOP/FINDER - Ever ! - ONLY Within the iMovie Program ! else all connections are broken and hard to impossibly to mend !
    but rather do as described here under
    Moving Event's and Project's
    Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
    (Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
    A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
    B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
    C. Do never Move or Alter any folder named
    • iMovie Event's - or -
    • iMovie Project's
    on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
    D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
    E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
    Event's window can show two faces
    Like this
    or like this
    from one hard disk Event - You can move it to the other hard disk
    You can not (at least not me) move Event to Project or other way around only
    Event to Event and Project to Project
    Yours Bengt W

  • Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    I believe there is a technique which uses some similar suggestion to unwittingly tempt the user into installing malware, in order to be able to watch some (usually sexually explicit) video, so be aware of this ruse.
    The only things I would download would be Perian that extends Quicktime, available here,
    http://www.perian.org/
    and if that did not do it, then try VLC to use instead of Quicktime.

  • I got a new Kobe and i am unable to register it on Adobe, when I log in to my account I receive the following error message "you can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile d

    I got a new Kobo and tried to register it so that I can download books from the public library. When I tried to register my device I received the following message " You can only authorize this computer with an Adobe ID that hasn't been previously used to authorize any other computer or mobile devices. Please try again.

    Please refer to Can't authorize with a previously used Adobe ID

  • You may have entered an invalid applications password

    HI,
    I changed the applsys password.
    FNDCPASS apps/AppsPc#123 0 Y system/SysTmp#890 SYSTEM APPLSYS AppsPc#123
    FNDCPASS-CANNOT DECRYPT (USER=BJAIMES)
    FNDCPASS-CANNOT DECRYPT (USER=PECEDENO)
    FNDCPASS-CANNOT DECRYPT (USER=JCASTRO)
    FNDCPASS-CANNOT DECRYPT (USER=OARMAS)
    + Autoconfig
    When I try start the application server, I have error:
    You are running adrepctl.sh version 115.33
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    Apache Web Server Listener :httpd ( pid 4079 ) is running.
    Can not start Apache Web Server now
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    starting Reports Server for TEST on port 7000.
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    Regards,
    Guido

    Pl post details of OS, database and EBS versions.
    Pl confirm you are following the steps in MOS Doc 437260.1 (How to Change Applications Passwords using Applications Schema Password Change Utility (FNDCPASS or AFPASSWD))
    user8039531 wrote:
    HI,
    I changed the applsys password.
    FNDCPASS apps/AppsPc#123 0 Y system/SysTmp#890 SYSTEM APPLSYS AppsPc#123
    Your "new password" is the same as the "old password" - pl see above MOS Doc for instructions
    FNDCPASS-CANNOT DECRYPT (USER=BJAIMES)
    FNDCPASS-CANNOT DECRYPT (USER=PECEDENO)
    FNDCPASS-CANNOT DECRYPT (USER=JCASTRO)
    FNDCPASS-CANNOT DECRYPT (USER=OARMAS)
    + Autoconfig
    You should not run Autoconfig if FNDCPASS reports errors - see MOS Doc 1306938.1 (FNDCPASS Troubleshooting Guide For Login and Changing Applications Passwords)
    >
    When I try start the application server, I have error:
    You are running adrepctl.sh version 115.33
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    Apache Web Server Listener :httpd ( pid 4079 ) is running.
    Can not start Apache Web Server now
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    starting Reports Server for TEST on port 7000.
    Cannot complete applications logon. You may have entered an invalid applications password, or there may have been a database connect error.
    Regards,
    Guido
    Hopefully this is not a production system - follow the steps in 2A or 2B in Section 1 of MOS Doc 1306938.1
    HTH
    Srini

  • Error "You may only define methods within "CLASS class IMPLEMENTATION"

    We have code in LMIGOSMC so that the vendor batch number appears in the MIGO transaction for certain movement types.  We have created another, custom movement type in which this functionality should be available so I need to add it to LMIGOSMC.  When I go in and try to make the modification I am getting the following error:
    "You may only define methods within "CLASS class IMPLEMENTATION ...ENDCLASS".
    What am I doing wrong?

    Hi,
    You are not doing anything wrong with regard to the syntax error you are getting.  During the syntax check of include program LMIGOSMC, the system is not aware of the CLASS... ENDCLASS statements within the program LMIGOSM4.  Try the syntax check at the LMIGOSM4 program level (or even better, at the SAPLMIGO level) and you will see that the error is not given.
    Regards,
    Jamie

  • I downloaded a season of a TV show on my ipad and 5 of the episodes wont download-when I try to download them-Ipad comes across w/ message-"you may not redownload this episode"

    I downloaded the season of a TV show on my ipad-there are 5 of the episodes that wont download.  When I try to down load them separately-it come across with message (you may not redownload this). 

    Anyone????

  • With PS 7  create new  Place two objects on the new file  then you may cut copy and paste Cs2  create new  place two object on the new file Cut is not available how does one cut and paste in new file

    With PS 7
    create new
    Place two objects on the new file
    then you may cut copy and paste
    Cs2
    create new
    place two object on the new file
    Cut is not available how does one cut and paste in new file

    If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
    In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
    Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
    If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

  • PHOTOSHOP SETUP FAILURE- SAYS 'YOU MAY ONLY INSTALL ONE PRODUCT'

    I have downloaded the trial version of Adobe Photoshop, when I ever I run the exe, it successfully creates the folder for CS3.
    Upon doing this, I access the setup.exe file and run it.
    It completes on 100%, and then says;
    'You can only install one Adobe product at a time. Please complete the other installation before attempting to install Adobe Setup.'
    I only have reader and flash on my computer, I have searched for this other incomplete installation and have found nothing.
    The system is in error as there is no other program installing or running.
    What then, is the solution to this issue? How do I get photoshop to complete it's installation?
    http://img514.imageshack.us/my.php?image=adobefailpr7.jpg
    There is a screenshot of the fail screen.

    This was reported a few times after CS3 came out.
    I can only suggest the various steps that were recommended then, which included a full removal from the Control Panel applet followed by a deletion of all folders (in several directories) related to CS3, then running the Adobe clean-up script, then re-installing.
    There were other problems related to AV, Flash, IE and registering a DLL too.
    All in all, it makes you long for the day when an installation routine worked properly. This is another example of Adobe rushing an incomplete, buggy program out to meet marketing time-scales rather than engineering ones. As long as they go on making obscene profits things are not likely to change either.

  • You may only have one phone number of this type.

    I keep getting this message when I try to update my iTunes account.
    There is only one phone number given.
    I tried changing the location (home, business, etc.) to no avail.
    I tried changing to a different phone number. Still no luck.
    I have copy/pasted this message into the Search Forum hoping to find it as an error message, but it returns no results.
    Any ideas for this would be great.
    Thanks.
    PC   Windows XP  
    PC   Windows XP  

    Erica:
    Welcome to the Apple Discussions. Try reentering all of you account data - delete then reenter. You might have to enter a new photo no, say your cell, save and then edit again and put in the original phone number. See if that will let you setup 1-click.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • TS1277 you may only deautorihze all computer once per year

    i have this message when i try deauthorize my account on my all komputer.
    any body can help me?

    Hi,
    Read http://support.apple.com/kb/ht1420
    Jim

  • Help with "You may need to enter the name and password for an administrator

    I'm trying to move files from one of my external harddrives to another external harddrive. I keep getting this message "You may need to enter the name and password for an administrator on this computer to change the item named "Documents". I also get this for other folders I want to move, but not all folders on that drive.
    I am the administrator, and it only gives me an "ok" button, no option to enter my name and password again.
    Any ideas?

    I have the same problem, trying to copy items from external hard disk to another computer on the network. I can copy without problems from external hard disk to my laptop. But not from external hard disk to another computer on the network, and neither from my laptop to another computer on the network, but ONLY if the files I try to copy from my laptop were first copied from that external hard drive. It keeps popping me up with this message. Please help, or fix.

  • SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

    Hi BI Experts,
    I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
    When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
    I appreciate all your input.
    Regards,
    OSR.

    Hi,
    Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
    If you want it in different client, you change it in BWMANDT field of RSADMINA table.
    hope it helps.
    Regards,
    Pruthvi R

  • SP2013 Bug Report: Health Reports - You can only specify the READPAST lock in the READ COMMITTED or REPEATABLE READ isolation levels.

    There appears to be an error when trying to view Health Reports from Central Administration. A simple fix within a SharePoint Stored Procedure fixes the problem. I get the error message "You can only specify the READPAST lock in the READ COMMITTED or
    REPEATABLE READ isolation levels." when just trying to click "View Health Reports" --> Go in CA.
    I have found the same problem in some blog posts which leads me to believe this is a bug:
    Problems Viewing Health Reports in SharePoint 2013
    From the blog post "I managed to work around it by altering the
    proc_GetSlowestPages stored procedure and commenting out the
    WITH (READPAST) line. "
    This also worked for me. It would be great if a fix could be released for this problem as it seems to cause other problems as well (site analytics freezes).

    Hi Dennis
    Hope you had found the hotfix and installed it.
    For the benefit of others who visit this thread SharePoint Server 2013 Client Components SDK hotfix package addresses this issue.http://support.microsoft.com/kb/2849962
    Regards
    Sriram.V

  • You can only log in using your primary BigPond Broadband account

    Hi I recently moved from QLD to WA and moved my bundle with me, I had foxtel on tbox over there but the box got left in the move so I bought another one today.  I have tried to register it but it comes up with the following message ' You can only log in using your primary BigPond Broadband account , If you can’t remember your primary account username and password, you will need to speak to a Customer Service Representative on 1800 331 402 So after calling the first time the lady registered the tbox and I thought that would be me on my way so I hung up and tried to get foxtel on tbox.  Ended up getting the same message and now my tbox does not appear to be registered at all.  So after another call which lasted around 30mins of me being on hold and a 3 way conversation where both telstra members were trying to fob responsibility off to each other and one being quite rude I was told I would be called back.. After another half an hour the guy called back and said that I could not get foxtel on tbox at my address.  To me this seems like Im being fobbed off as he didnt know what the problem was,  I am in a unit and I checked my address on the telstra website which stated 'great news, foxtel on tbox is available in your area' and after being told I couldnt get it, I put a note on the notice board of the aparment block to see if anyone else had foxtel and they do so clearly that is not the problem. Can anyone advise what to do or who to speak too to try and clear this up? Thank you

    There are times like this I wish I could log in to customers accounts and fix it however not allowed  ESQ check which is a serviceability check and checks what services are available at your address. So if it says Foxtel Tbox is eligible then its all good to go then this wouldn't be the problem mate. What needs to happen is that your email address and serial number might be still on the admin portal of the tbox registration. However you said Tbox support have removed this from the account in saying that this can take a little while to be completely removed from our records which would then allow you to register a new device. Try the registration a little later on or again tomorrow and see how you go. Please let us know how you get along. Cheers bud.      

Maybe you are looking for