Messages and edit buttons do not work. How can I fix this?

My messages & Edit buttons on the text conversation screen do not work/unresponive. Cannot get back to main messsage screen or use edit to forard or delete texts. Help??

Try a reset, see if that corrects the problem.

Similar Messages

  • Phone is frozen in  a middle of a call and my top restart button do not work, how can i fix this

    phone is frozen in  a middle of a call and my top restart button do not work, how can i fix it

    Bummer.
    Without having the top button, you couldn't do a hard reset.
    I'd say you might be looking at backing up and restoring through iTunes unfortunatley.

  • Speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default.

    speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default. I also have no voice with Safari or any other apps including music!

    If your speaker is broken, then you may need to get a repair done.
    Are you unable to hear anything at all, or is it just one speaker in particular?
    If it is just one speaker, where's it located?

  • My iphone 5 camera is not working how can i fix this problem ?

    My iphone 5 camera is not working how can i fix this problem ?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Updated my IOS 7 now some of my games are not work, how can I fix this problem?

    I have updated my Ipad to the IOS 7 and now some of my games/apps are not working, how can i fix this or revert back to what I had before?

    I'm afraid you'll have to wait until both Apple and the makers of your games/apps upgrade to new versions.
    Apparently there are still some issues with iOS7 that are being dealt with and the same with some apps.
    As for going back, I don't think you will be able to get this information from these forums...

  • My lock screen button won't work how can I fix this?

    My lock button won't work, every time I click it it won't lock my screen unless I press the button hard enough and or in a weird gesture, how can I fix this where I don't need to struggle locking it?

    Stating the obvious,
    Can you Reset it?
    Have you checked if the Hold switched is not in locked position? (should not see the red mark)

  • TS2771 my ipod touch home button does not work how do i fix this?

    my ipod home button does not work. How do i fix this?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • HT1414 my wifi option is grayed out and will not work. how can i fix this problem?

    my phone keeps rebooting itself and the wifi and bluetooth option will not work... tried system reboot and did not fix problem.

    http://support.apple.com/kb/ts1559

  • My macbook is not  turning on and the charger is not working, how do i fix this???

    My macbook is not working anymore and the charger is'nt either. It had a message pop up before... it said: " the computer will be acting spiracctically".We tried another mac charger but it STILL did not turn on. This is very annoying. how do i fix it??? please help me.

    Try here >  Apple Portables: Troubleshooting MagSafe adapters

  • Lock button does not work, how can i fix it ?

    Hello guys, my lock button on my Ipod Touch is not working, i do not know what to do and i couldnt fine apples Emal.
    What are my options to fix it ?
    Any help will be appreciated.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

  • My Norton tool bar No longer is visable and does not work, how can I fix this

    My Norton 360 that saves all my passwords for me does not work on fire fox 4.0. How can I go back to the previous version? I was not given a warning that Norton 360 wouldn't work until after I had already down loaded 4.0, or I would not have downloaded it!
    I did not know that the tool bar was going to disappear!

    Norton says they are going to update 360 in April for the Firefox 4.0.
    You can get Firefox 3.6.16 here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

  • My iPod nano (newest version) screen lights up but does not work how can I fix this?

    Need help please!!
    I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers.
    Does anyone know how to fix this?
    Any help would be greatly appreciated,
    Thank you for your time

    Did you already try to reset the iPod?
    How to reset an iPod nano (6th generation)
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.

  • Once I add my .swf to Dreamweaver, the buttons are not clickable, how can I fix this?

    Hello there,
    I'd just like to start out by saying that this is the first time I have posted on these forums, so if I have done anything wrong, I apologize!
    Anyway, about my question, just like the title says, once I import the .swf into Dreamweaver the buttons are not clickable, however when tested outside of Dreamweaver, they work correctly.
    Basically I have an animated banner with some audio and two buttons, the buttons mute and unmute the music.
    The file consists of two layers, one of which has 2 keyframes, the first keyframe has the Audio with the settings; "Effect: None. Sync: Start, Loop" and a button leading to the next frame.
    The next keyframe (still on layer one) has much of the same but the Audio settings are different; "Effect: None. Sync: Stop, repeat x 1" and this will stop the music.
    Now on the other layer (Rocket) I have a movie clip of a space-themed background and a rocket flying across it, the movie clip is made up of a motion tween and another movie clip which is the rocket.
    I am using Flash CS6 and Dreamweaver CS6 on a Windows 7 computer. I am also using Actionscript 2.0
    I apologize for the amount of information and I'm not very briliant at explaining things, so here are some images of the flash file, hopefully they'll help;
    Layer setup - http://i.imgur.com/iZHwfAw.jpg
    The movie clip - http://i.imgur.com/ayvPJUZ.jpg
    Keyframe one sound settings - http://i.imgur.com/LWbnQhO.jpg
    Keyframe two sound settings - http://i.imgur.com/7kS9dO2.jpg
    Actionscript for the first button/first keyframe - http://i.imgur.com/x6ROqPv.jpg   - (The second button/keyframe has the same code, but obviously the instance name and frame number has been changed)
    Again, I apologise if this all seems confusing!
    Thanks in advance for any answers to this question
    Adam.

    If you did not create this swf yourself then you won't be able to do what I am suggesting.  If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output.  That will create an html page that embeds the Flash file.  Test that file in your browser and see if it plays properly.  IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
    Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

  • 80 G classic buttons will not work, how can I fix it?

    My son's 80 gb ipod classic will hook into iTunes and even play songs. I have reset and restored it but it doesn't respond to any buttons. When I reset the screen gets dark, but it never restarts. I restored it twice and even left all the music off in case it was some weird corrupt file, but still no luck.
    It is over a year old - is it worth taking to the Apple store?

    Go to ifixit.com. Look up your model then check into replacing the keyboard. That's the best you can hope for, you're not going to fix the existing one.

  • Illustrator CC 2014 - spacebar hand tool shortcut not working, how can I fix this?

    The hand tool is not being temporally activated by the spacebar in Illustrator CC 2014.
    I've restarted, deleted preferences, nothing seems to work.
    I’m pretty sure it was working when I first installed the new version - just stopped for no reason.

    MB&B,
    Item 7) under 5) in this list shows the usual suspects.
    You may also consider trying some of the other options on the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

Maybe you are looking for

  • Exchange rate gain /loss is not posted in the contract

    Hi Sap People, Exchange rate gain /loss is not posted in the contract(cashflows). This is w.r.t  SAP Banking Module. The open items are posted with a certain exchange rate in the contract at the time of disburesment,while clearing thru FF68(incoming

  • Java Script Adobe Acrobat 5.0

    O Adobe Acrobat 5.0 suporta java Script? O que eu posso fazer com o java Script dentro do Acrobat? Daniel [email protected]

  • Non stop problems since update

    Ok, so I updated to 10.4.8 and am now on 10.4.9 as of yesterday. Anyway, upon updating to 8 and deleting my windows partition with bootcamp, I have been having more issues than ever befor. First my internet started disconnecting constantly which seem

  • Aperture and iPhoto Running Slow Since Upgrading to Yosemite

    IPhoto and Aperture is now running so slow it is nearly unusable.  It has an especially slow startup.  It was running just fine at first.  I had imported some Canon 5D (original) RAW files, and it has been grinding ever since.  I have tried deleting

  • Getting error 150:30 when launching DW.

    Says to contact you.