Messages application not displaying messages

Hi everyone, i am hoping to get some help here.
anytime i miss a call, the missed call log takes over my messages application (even though i did not enable call logs to be displayed in my messages application). So when i open my message or email application i will not see my emails but my missed call logs will be displayed there until i do a hard reset.
This is starting to annoy me. Is there a fix to correct this error?
Thanks

"My Device: Blackberry Curve 9315/9320"
What model BlackBerry is this? Where did you get a "9315" from?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Application not found message

    Hy;
    I am having a problem whif some applications,that when i try to open them i recieved the message "application not found" message.I make a backup and a sistem restore and still the same.I will apreciated your help on this.Thanks
    Note;
    My sistem is : window 7 64 bits paviliong7 hp laptop

    I think your registry is broke.
    Maybe try this fix here:
    http://social.technet.microsoft.com/Forums/windows/en-US/18bdeee6-6abc-4b7c-b1a7-f2542e812f82/how-to-fix-application-not-found-error
    Hope that helps
    Please don't forget to up vote answers you like or which help you and mark one(s) which answer your question.

  • LSO_CHECK_BOOKING custom error messages are not displayed

    Hi,
    Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
    Is there a way for me to display my custom error message instead of the predefined SAP message?
    Thanks a lot.
    Cheers,
    James

    Hi James,
    You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
    Learning Portal:
    The framework of the existing design of the Learning Portal does not
    allow customer specific error messages to be displayed in the portal.
    Only a generic message will be displayed when prebooking in the learning
    portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
    application does not expect to raise an exception from the BADI. If the
    BADI processing is assumed to be unsuccessful, the messages filled by
    the BADI will be ignored and a general error message will be displayed
    in the portal.
    So this is basically a design limitation.
    Administrator Portal:
    Have you tried e.g. the following notes?
    SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
    SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
    Regards,
    Agnes

  • R/3 Warning Messages are not displayed

    Hi experts!!!
    I have the following issue:
    Credit Limit Check works in ERP and displayes warning message during order creation. I need the same message to be displayed in B2B application.
    How can i achieve this???

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • Why is Mail 6.2 not displaying messages from my Exchange account?

    Greetings,
    I have a new 13" MacBook Air running Mountain Lion and I'm noticing that most of the time my Mail inbox is not displaying messages from my work Exchange account; however, it does display messages correctly for my Gmail account.  I've included a screen shot of what I'm experiencing.
    Any ideas?
    Thanks,
    Garry

    I have the same problem, as does a coworker. It happens, for instance, if I click on another mailbox (such as Junk) then go back to the inbox. Our company uses Exchange. Quitting mail usually fixes it. A rebuild of the mailbox will too.  Only happens on my Mac at work, not my Mac at home (connected via VPN).
    Another problem I have is with mail not syncing. Mail I have deleted from another device (such as on my Mac at home or my iPad) does not get deleted from my inbox at work. Sometimes they'll go away when I click on them. Other times they won't go away and the only way to delete them is to rebuild the mailbox.
    And lately I have had problems with attachments. Attachments sent from my Exchange account at work show up as .eml attachments in my iCloud account and mime attachments on my iPad or as a string of characters (20-30), not as an attachment. This happens whether sent from home or work.
    I have our IT department looking into the third problem (which is the most vital one for me).  I'll report the other two annoying problems and see what they can figure out.

  • My sent messages are not displayed...what happened and how do I restore?

    My sent messages are not displayed...what happened and how do I restore?

    http://kb.mozillazine.org/Disappearing_mail

  • Warning messages are not displayed in confirmation

    Hi,
    We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
    Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
    Thank you
    Natarajan

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • SBWP: The content of message is not display

    Hi,
    The user use SBWP inbox. There the message is not display the content of the message.
    There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed.
    There can only print the content of message.
    What I have to do to display the content?
    Regards,
    Betta

    nyet wrote:
    Sir,
    When forwarding SMS as email, the content of the SMS is stored as an attachment called <primary_text.txt> file, it's double pain since the receiving person can not read the attachment via Z10 since the device can not open *.txt> file extension.
    If it's possible, please restore this functionality back to the way of OS 6/7, which put the content of the SMS in the body of email, since I do rely on this feature heavily.
    Leo 
    How exactly are you trying to forward an SMS as an email?
    You can forward the SMS to an email address of your choice and that`s when your SMS will be converted to MMS, and sent to the email address of your choice . The recepient should get your message as "[email protected] carrier.com   
    Another way of doing it is to select "Share" instead of forward. Then a list of options will open that includes your email address. Select your email address and the selected text message will be added as "body.txt" and after this, you just have to enter the recepient email address and subject line (optional).
    The recepient will receive the email with a "body.txt" attachment that can be downloaded and open in or with the "Notepad" on PC

  • Some Text Messages do not display when using large font on iphone

    When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

    Hi Peter
    Actually, Captivate does have an essentially unlimited number
    of undo levels. But that number may appear to be different. The
    number of levels starts when you begin editing the project. If you
    close and re-open a project, that starts the undo process over.
    I've tested and I gave up after about 280 or so undos.
    Where Captivate doesn't allow an undo, it normally warns you
    with a rather catastrophic looking dialog.
    Cheers... Rick

  • My messages are not displaying, in the body of the message?

    When going to mail I see messages but the body of the message does not display.

    Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS3276 Mac Mail on OSX 10.8.2 not displaying messages

    Since upgrading to OS X 10.8.2 I'm having a lot of problems with my email (works fine on other devices I have). The main one is that isn't not displaying messages, it shows there's 3 new mail messages, but the message list and preview window are empty. This doesn't happen all the time but when it does nothing I do fixes it. Then after a while it will fix itself, then the issue recurs again.
    Does anyone know how to resolve this??
    Thanks

    I would suggest you try opening "Mail">click on "Mailboxes" in the Menu Bar> and select "Rebuild" from the list.  That may solve it.

  • When I try to update LR I get an error message Application not found

    When I try to update LR I get an error message "Application not found".
    When I try Help in LR it can't be found.
    What is wrong?

    Talked with Adobe support. Told me to go to Cloud app and log out, then log
    in again and then update. Worked fine for me. Hope this helps!
    Best regards,
    Fredrik Moell
    Tomatis New Zealand
    www.tomatis.co.nz
    A division of Your Amazing Health Ltd
    54 Fancourt Street, Meadowbank, Auckland 1072
    0800-TOMATIS (866 2847)
    Personal 021-1721 930

  • How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

    How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

    You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
    Have you got Keychain set to open on Login or is it attempting to open on it's own.

  • Message in forms AS10g does not display message

    We use the message command to display messages when debugging forms. In AS10g, the content of the message is not displayed. Has anyone found a workaround to this?
    Thanks,
    Jeff

    The console window is set to the proper window. If I duplicate the line of code, it works... twice. I.E.
    message('before commit');
    message('before commit');
    commit;
    message('after');
    message('after');
    This works but you get two messages. Code it once and you get only an acknowledge button on not the text. I've also tried all combinations of the acknowledge option and using a pause after the message.

Maybe you are looking for