Messages are Archived but cannot be seen in Outbound Interface in RWB

Hi Experts,
I am having File to RFC scenario......where files are successfully pinged from FTP server and getting archived.....
but when I check in RWB the files are not found in Outbound Interface in Message Monitoring...........
Then I am deleting the Archived files and placing again manually in FTP server......Then files are archived and seen in
outbound interface successfully......
I m not getting where the exact problem is.........From 2 days I m placing manually the files after checking the files are not
seen in Outbound Interface....
Please help me out.....
Regards,
Sudheer

Hi Sandeep,
I have checked the File Communication Channel.......
Tick check-box of "Add Time Stamp". --- OK
Give path of Archive Directory correctly & complete. -- OK
Also choose "Empty file Handling" for Process Empty file. -- Not Checked.
Regards,
Sudheer

Similar Messages

TS4006 If I'm receiving a message "all devices are online, but cannot be located" what can I do to be able to locate the devices on a map?

If I'm receiving a message "all devices are online, but cannot be located" what can I do to be able to locate the devices on a map?

My understanding is that a device must have access to either WiFi, a cellular network, or (best) GPS in order to establish a location. Of course iPhones can access all three and iPads also if they incorporate cellular. However, Mac computers don't have GPS or cellular.
So if a Mac is connected to Internet via Ethernet to a LAN and not WIFi it will not be able to establish a location. Anyway, that's my experience.

Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11

Applications are updating but cannot install Application Manager?

Applications are updating but cannot install Application Manager? Each time I try to open Application manager it tries to install every time.After installing several times I was able to finally see the problem. It says it cannont install because some Adobe program is running. I donot see anything Adobe running except for Application Manager in TaskManager.

Ok, here is what the box that comes up says:
We've encountered the following issues:
Other instances of Adobe Application Manager are currently running which must be closed before installing this product. Please close or wait for them to complete.
I checked control panel and only see the CS6 Master suite and Adobe Help Manager listed, not the Application Manager. Before I reinstalled I used The Adobe Clean tool to remove all programs and all but this one installed fine.

Messages are present but I can't see them

Something happened that has affected one of my POP mail accounts. I was doing something (not sure what) and suddenly, all of the messages that were stored in the mailbox disappeared. Vanished. At the same time, an "arrow" appeared just to the left of the mailbox name, similar to the arrow that sits just to the left of global "Inbox." The arrow suggests there are subsidiary folders in the affected mailbox. When I click the arrow, it rotates 90 degrees (points down), but I still can't see my missing mail or other folders. Equally puzzling is that as new messages arrive for that mail account, the "new messages" counter next to the mailbox name increases as it should, but I still can't see the messages. Bottom line, messages are in there someplace -- I just can't seem to find them. Any suggestions on how to repair this problem?

Report the names of the files and folders present at the first level of the ~/Library/Mail/POP-username@mailserver/ account folder.
In order to post the exact file names and avoid typing mistakes, proceed as follows. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. With that folder open, if you’re looking at it in View > as List mode, first collapse any expanded folders so that the Finder only shows the files and folders at the first level. Now, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

My sent text messages are received, but are from my email address rather than my phone number since updating to iOS 7.

Fellow iPhone users have complained that my text messages are not longer associated with my phone number. Instead, they see my texts messages as from my email address.
The problem started after I updated to iOS 7. How can I resolve this? I would rather not continue to confuse friends/family when they receive a text message from an email address they do not recognize when it was in fact sent from my phone.
Thank you.

Thank you!
I think it's odd that the default setting is now your email rather than your phone, however... Very confusing for me and other iPhone users I know.

FCP X is open, but cannot be seen?

It says it's open at the top and I can see all the usual fcp stuff there, such as 'view, mark, modify' etc. However the rest of it cannot be seen at all. All I can see is my desktop and therefore cannot edit anything. This is extremely important as I'm required to do a showreel for next week. So if anyone could please help it would be greatly appreciated.

I'd propose you simply:
1) quit fcpx or force it out
2) remove | delete the file used in lion and M/lion to reinstate the app when it's fired up from last item. This file is at
~/library/Saved Application State/com.apple.FinalCut.savedState
Use finder opt+Go menu and drag to trash or use the bash terminal and the unix
"rm -f ~/library/Saved Application State/com.apple.FinalCut.savedState" to delete it.
3) now fire up FCPX. It should restore the FCPX UI in its pristine state using the current settings.
Try this
No need for any third party apps :) .
Post your results for others
Hth
Warwick

IMessage is saying messages are delivering but they are not! How do I sort this?

Hi,
If my girlfiriend sends me a test message from her iphone, the imessage window says it's delivered, but I don't get the message.
She currently has two conversations in her messages, with me, one has my phone number highlighted as the contact, the other has my e-mail address highlighted as the contact. The conversation with my e-mail as a contact works properly, the one with my phone number as a contact says the message is delivering, but the message does not arrive.
I can send a messge to her phone number or e-mail address and they will deliver.
Any idea how to fix this?
Thanks.
p.s. I'm on iOS 5.0.1, she's on iOS 5. Both iPhone 4.

It sounds like your phone did not register correctly with the iMessage service.
On your phone, go to Settings > Messages and turn iMessage OFF. Wait about a minute and then turn it back ON.
Underneath iMessage ON, verify that you see the message "iMessages can be sent between iPhone, iPad, and iPad touch."
Then have your girlfriend send another message to your phone number to test it.

Hi I'm trying to install an HP C4180 printer as net printer through Alicegate router (Thompson technicolor). Printer works ok when connected with USB to Macbook air, but cannot be seen on the printer installation configuration. Mac OSx 10.7 (Lion)

Hi folks.
From this morning I'm trying to "see" an HP printer C4180 connected on the USB port of the wi-fi router (TIM Alicegate ADSL2 Wifi+N, manufacturer Technicolor).
I installed latest drivers and checked everything is ok and works fine until printer is connected directly with USB to my Macbook Air.
Then I connect the USB to the router and try to find the printer.
On Alice help suggest to find it by ging to system preferences, then printers, add printer with "+", select "windows" sheet. There I can see - not always in reality, but sometimes - the "workgroup" in the left column, select, "alicegate" in second column, select, and here instead of finding the printer list there is a pop up saying that "the server version you are trying to connect to is not supported".
Reading other forums, it may seem that the problem is Lion not yet supporting this kind of connection.
Here a photo of the situation when the message occurs:
Help..
Thanks and regards
Luca

anchio ho lo stesso problema con Mas Os x 10.7.4
con il sistema 10.5 funziona perfettamente
credo sia un problema del sistema
ho provato con 10.8 stesso problema
ciao

Clear out old messages in Exchange 2010 journal mailbox after messages are archived to .PST Getting Error on Date

# THIS IS THE FIRST COMMAND THAT I RUN IN A SEPARATE .PS1 FILE. THIS SEEMS TO WORK FINE:
New-MailboxExportRequest JournalMailbox -FilePath '\\dfsdr.dc.pud\PowershellEmailArchive\Journal.pst'
# NEXT I AM TRYING TO CLEAN OUT EVERYTHING ELSE UP UNTIL 1-2 DAYS AGO BUT GETTING THIS ERROR:
[PS] C:\scripts>.\CleanOutOldMsg.ps1
Please adjust the date time. Make sure it is in the correct format.
    + CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 44F6D37F
# HERE'S WHAT I'VE DONE:
$global:startDate = (Get-Date).AddDays(-31).ToString('MM/dd/yyy')
$global:endDate = (get-date).AddDays(-1).ToString('MM/dd/yyy')
# HAVE TRIE THIS DATE FORMAT TOO:
$endDate = (Get-Date).AddDays(-1).ToShortDateString()
$startDate = (Get-Date).AddDays(-31).ToShortDateString()
# AND ALSO THIS DATE FORMAT:
# $endDate = Get-Date -Day 2 "00:00:00"
# $startDate = $endDate.AddDays(-30)
# $endDate = $endDate.ToShortDateString()
# $startDate = $startDate.ToShortDateString()
# THIS COMMAND GIVES DATE ERRORS:
Search-Mailbox -Identity JournalMailbox -TargetFolder inbox -TargetMailbox jimk -SearchQuery "Received:'${startDate}'..'${endDate}'" -DeleteContent -Force
# THIS COMMAND GIVES DATE ERRORS TOO:
Get-Mailbox -Identity "JournalMailbox" | Search-Mailbox -SearchQuery "Received:'${startDate}'..'${endDate}'" -DeleteContent -Force
# THIS WORKS:
Search-Mailbox -Identity JournalMailbox -TargetFolder inbox -TargetMailbox jimk -SearchQuery "Received:02/07/2014..03/07/2014" -DeleteContent -Force
# I FOUND SOME OF THE INFORMATION HERE:
https://serverfault.com/questions/511610/how-can-i-move-exchange-items-to-a-pst-using-powershell
Thanks in advance! Jim
Sorry if I wasn't as clear as I could have been. I'm trying to clean out the Journal mailbox after exporting the messages to a .PST file. I've tried formatting the date different ways and when I check it the format seems OK. For some reason I'm
still getting the same error. I've tried this which was suggested and I received the same error listed above:
Search-Mailbox -Identity JournalMailbox -TargetFolder inbox -TargetMailbox jimk -SearchQuery "Received:'${$startDate}'..'${$endDate}'" -DeleteContent -Force
For some reason the -SearchQuery is not accepting the variable.
Thanks, Jim

Thank You Yan Li!   I ran commands both ways and still received errors. Here's the first command and the error message:
Search-Mailbox -Identity JournalMailbox -TargetFolder inbox -TargetMailbox jimk -SearchQuery "Received:"$startDate".."$endDate"" -DeleteContent -Force
Error:
[PS] C:\scripts>.\CleanOutOldMsg.ps1
A positional parameter cannot be found that accepts argument '02/10/2014..03/12/2014'.
    + CategoryInfo          : InvalidArgument: (:) [Search-Mailbox], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Search-Mailbox
Here's the result of the following command which is formatted a bit different per your suggestion:
Search-Mailbox -Identity JournalMailbox -TargetFolder inbox -TargetMailbox jimk -searchQuery "Received:>$startDate and Recieved:< $enddate" -DeleteContent -Force
[PS] C:\scripts>.\CleanOutOldMsg.ps1
The property keyword isn't supported.
    + CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 34A6B2A1
Would you happen to have any other suggestions? Thanks in advance! Jim

Content of email messages is not displayed although all the email messages are listed. Cannot bring up any of the messages!

Question: Has anyone experienced on an IPad 2 this problem? I receive all emails but on my IPad cannot open any of them. This was not true a month ago and I have found no way to correct the problem. Would appreciate any input.

Try this. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Just got an iphone 4s and now cannot access email on my mac desktop. I can hear the messages coming in, but there is nothing there.

I can hear the messages coming thru, but cannot see them. Don't know if it has something to do with upgrading to the ios 7 on the IPAD or w=switching to an iphone 4s. Please help.....

What Mac model is failing to get mail? Is it the MacBook you show in your profile or another desktop model?

HT3529 The punctuations in the message cannot be seen by my recipients, why?

I found that only the punctuations of messages of my iPhone cannot be seen by recipients...my family members don't have such problem.. I want to know what's the problem??

Because there is a flaw in the App Store that gives you an alert you can never ever get rid of telling you to download Mavericks, even though when you click it then tells you your machine is too (I have to say 'darn' here because Apple automatically astersiks out the first word I used that also begins with d and is four letters) old. So you have to live with that little "1 update available" alert, though in reality, you cannot install it. You can imagine that either it is a sinister plot to wear away at you to buy some new hardware, even though yours is working just fine, or that it is a programming error Apple just doesn't care enough about to correct.

Error while creating a Message Area

Hi All,
When I create a Message Area using the UI element 'MessageArea', I get the following error message at the bottom of the screen:
"Note: Multiple message areas have been implemented, but only one is supported"
I just have only one Message Area created, but still I get this error.
Regards,
Tom

> 1) I am getting the error message"Valuation area not defined", while creating a requisition. How to solve this problem?
Please Go to OMS2 Material types and Select Material Type and set Qty / Value is Checked in all Valuation areas. Also go to Material Master and ensure all the values Maintained in Accounting view.
> 2) We can put a purchase order on hold. What is the equivalent thing in Purchase requisition?
The Hold Functionality is for External Documents only.
> 3) What is the difference between holding a PO and changing the PO by ME22n? What are the fields which change PO does not open up, but hold PO opens up?
Whenever you are not sure about the Details in PO you can put the Document on Hold and Later you can Save after.
> 4) The tax code is set as default in PO. We want to make a PO of a material which is usually taxable, but not in this case. But the tax code is set as default. So, how to overcome this?
You can not set Default Tax code for Purchase order ME21N. Further the Tax codes can be Pulled into Purchase Order thru Purchase info Records.
Regards,
Ashok

Problem in ABAP Proxy(sometimes XML Messages are not being created)

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

Messages are Archived but cannot be seen in Outbound Interface in RWB

Similar Messages

Maybe you are looking for